You may also like
Manufacturer Resources
Spec Sheet
Product Specs
- Amperage Rating:
- 2500A
- Circuit Breaker Frame Type:
- Complete breaker
- Circuit Breaker Type:
- RD
- Interrupt Rating:
- 65 kAIC at 480 Vac, 50 kAIC at 600 Vac
- Number Of Poles:
- Three-pole
- Terminals:
- Without terminals
- Trip Type:
- Electronic LSI
- Voltage Rating:
- 600 Vac
- Department:
- Electrical
- Product Length:
- 9.75 IN
- Product Height:
- 15.5 IN
- Product Weight:
- 135 LB
- Product Width:
- 15.5 IN
B-LINE RD325T92W – Frequently Asked Questions
1) Does the Eaton RD325T92W circuit breaker come with lugs or terminals?
No. The RD325T92W ships without terminals, so you need to order the correct lugs or bus connectors separately for your 2500A three-pole application. Plan that into the order before the switchgear goes together, because the breaker will not land conductors as shipped.
2) What is the interrupting rating of the Eaton RD325T92W, and will it hold on a 480V service with high available fault current?
The RD325T92W is rated 65 kAIC at 480 Vac and 50 kAIC at 600 Vac. If your engineer's short circuit study shows available fault current at or below 65 kA on a 480V system, this breaker covers it without series rating tricks. Above that, you need a higher AIC frame or current limiting upstream.
3) Does the Eaton RD325T92W have ground fault protection built in?
No. The trip unit is electronic LSI, meaning long time, short time and instantaneous only. There is no ground fault (G) element. If your service entrance requires ground fault protection per your design, you need an LSIG trip unit or a separate ground fault relay and shunt trip arrangement.
4) Will the RD325T92W work on a 600 volt three phase system?
Yes, it is rated to 600 Vac and is three-pole, so it suits 480V and 600V three phase distribution. Note the interrupting rating drops to 50 kAIC at 600 Vac versus 65 kAIC at 480 Vac, so coordinate against your fault study at the actual system voltage.
5) Can the electronic trip on the RD325T92W be set to coordinate with downstream breakers?
Yes. The LSI trip unit gives adjustable long time, short time and instantaneous functions, which is what lets you build selective coordination with feeder breakers below a 2500A main. A thermal magnetic breaker would only give you the long time and instantaneous ends of that curve.
How fast can I get the B-LINE RD325T92W delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE RD325T92W come with a warranty?
Absolutely. The B-LINE RD325T92W is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE RD325T92W?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE RD325T92W from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.