Eaton Telephone Wallplate with...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$4.05
Eaton Telephone Wallplate with Dual 4-Conductor Jacks, White

Eaton Telephone Wallplate with Dual 4-Conductor Jacks, White

(No reviews yet) Write a Review

Model: 3547-4W

In Stock (leaves warehouse same day if ordered before 3pm ET)

$4.05
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Eaton Telephone Wallplate with Dual 4-Conductor Jacks, White

Eaton's Telephone Wallplate with Dual 4-Conductor Jacks pairs a flush-mount, mid-size design with (2) 4-conductor modular jacks for commercial and residential telephone applications. Molded from white thermoplastic elastomer (TPE) and measuring 4.906 in wide x 3.146 in deep x .758 in high, this UL Listed, FCC compliant wallplate terminates RJ11 and RJ14 cabling through Type 625B3 screw terminals for dependable voice and data connections. It is engineered as a jack-style, data/voice modular jack device suited to both new construction and retrofit telephone wiring, giving electricians and low-voltage installers a compact, code-compliant termination point for structured cabling drops.

Key Features

  • Compact Dimensions: Flush-mount profile measuring 4.906 in (width) x 3.146 in (depth) x .758 in (height) fits standard wallbox openings without protruding excessively from the wall surface.
  • Durable Construction: Molded from thermoplastic elastomer (TPE) in a mid-size style for long-lasting, everyday performance in commercial and residential settings.
  • Dual Jack Configuration: (2) 4-conductor data/voice modular jacks accept RJ11 and RJ14 cable types, supporting standard telephone line wiring.
  • Connector Type: Type 625B3 screw terminals deliver a secure, code-compliant wire termination for both cable types.
  • Jack Design Type: Purpose-built jack design type intended specifically for data/voice modular jack applications.
  • Flush Mounting: Flush mounting method keeps the wallplate seated cleanly against the wall surface for a finished, professional appearance.
  • Finish: Clean white finish coordinates with standard wall, trim, and fixture colors found in most commercial and residential interiors.

Certifications & Compliance

  • UL Listed
  • FCC Compliant

Technical Specifications

  • Product Type: Wallplate
  • Warranty: Refer to warranty document.
  • Department: Electrical

Typical Applications

  • Commercial Telephone Installations
  • Residential Voice and Data Wiring
  • Flush-Mount Wallbox Retrofits
  • New Construction Structured Cabling
  • Renovation and Remodel Telephone Upgrades
  • Low-Voltage Data/Voice Jack Terminations

Why Eaton?

Eaton's UL Listed, FCC compliant wallplate combines resilient thermoplastic elastomer (TPE) construction with secure Type 625B3 screw-terminal connections, delivering reliable, code-compliant voice and data performance for commercial and residential telephone installations. The mid-size, flush-mount design and dual 4-conductor jack configuration make it a practical choice for professionals standardizing on dependable, consistent telephone wiring devices.

Manufacturer Resources

Product Specs

Product Width:
4.906 in
Mounting Method:
Flush
Product Color:
White
Certifications:
UL Listed
Product Length/Depth:
3.146 in
Application:
Commercial, residential telephone
Product Height:
.758 in
Product Type:
Data & Multimedia Wallplate
Product Material:
Thermoplastic Elastomer (TPE)
Design Type:
Jack
Warranty:
Refer to warranty document.
Product Style:
Mid-size
Compliances:
FCC Compliant
Device Type:
Data/voice modular jack
Cable Type:
RJ11, RJ14
Connector Type:
Type 625B3 screw terminals
Wire Type:
Type 625B3
Department:
Electrical
Connection Type:
Screw Terminals
Listing:
UL Listed
Standards:
FCC Compliant
Product Group:
Wiring Devices
Product Subgroup:
Wallplates
Product Weight:
0.08 lb
Product Length:
3.146 in

Eaton 3547-4W – Frequently Asked Questions

1) Can I plug an RJ11 phone cord into the Eaton 3547-4W wallplate, and will it handle a two-line setup?
Yes on both counts. The Eaton 3547-4W carries two 4-conductor modular jacks and is rated for RJ11 and RJ14 cable types. RJ11 uses one pair for a single line; RJ14 uses two pairs, so a two-line phone works off one jack when the incoming cable is wired for it. With two jacks on the one plate you can also run a phone and a fax or modem off the same opening.
2) How does the Eaton dual-jack telephone wallplate terminate the cable - punchdown or screws?
Screw terminals, Type 625B3. You land the individual conductors under screws rather than punching them down, so no 110 or 66 impact tool is needed. Handy for service calls where you are re-terminating an old station cable with nothing but a screwdriver and strippers.
3) What do I use if the telephone drop shares a box with a receptacle or switch?
The Eaton 3547-4W is a 1-gang style jack plate with two 4-conductor jacks and no other device opening. For a two-gang box mixing device types, a combination plate such as the Mulberry 76432 or 76532 cold rolled steel 2-gang combination wallplate in white, or the Pass & Seymour TradeMaster two-gang combination wallplate in nylon, covers the mixed opening - you would then supply the jack insert separately.
4) Is this Eaton phone jack plate acceptable for a commercial building inspection?
The 3547-4W is UL Listed and FCC compliant, which is what an inspector or spec writer looks for on a telecom termination device in a commercial job. It is listed for both commercial and residential telephone use.
5) Does the Eaton dual-jack plate come with the jacks already built in, or do I buy modules separately?
The jacks are integral. It is a one-piece jack-style plate with the two 4-conductor modular jacks molded into it, so there are no separate keystone inserts to order. You supply only the station cable and the wallbox or low-voltage mounting bracket.
6) I need to cover a single-gang box that already has a phone jack insert in it - what should I order instead of the Eaton 3547-4W?
The Eaton 3547-4W includes its own (2) 4-conductor jacks, so it is meant for an opening where the jacks still need to be provided. If the jack hardware is already in the box and you only need a cover, a plain 1-gang plate such as the Bryant P26W in the HWS series or the Mulberry 86401 steel 1-gang wallplate is the right direction.
7) The Eaton 3547-4W is mid-size - what if the wall opening is rough and needs more coverage?
The Eaton 3547-4W is a mid-size flush-mount plate measuring 4.906 in wide by 3.146 in deep. Where drywall cut-outs are ragged and need a larger footprint, an oversized plate such as the Pass & Seymour SPJ junior-jumbo thermoset wall plate covers more wall, though it has a toggle switch opening rather than telephone jacks.
8) What is the Eaton telephone wallplate made of, and will it yellow or crack in a rental unit?
It is molded thermoplastic elastomer (TPE) in white. TPE has more give than rigid thermoset or nylon, so it tolerates over-torqued mounting screws and knocks better than a brittle plate, which matters on turnover units where plates get handled often.
9) Is the Eaton 3547-4W suitable for a retrofit on old telephone wiring, or only new construction?
Both. The screw-terminal 625B3 connections take existing quad or twisted-pair station wire directly, which is why it works on flush-mount wallbox retrofits and remodel phone upgrades as readily as on a new structured cabling drop.
10) Does the Eaton 3547-4W material hold up the same as steel wallplates in a back-of-house area?
The Eaton 3547-4W is molded from thermoplastic elastomer (TPE) in white, which is non-conductive and standard for low-voltage voice terminations. In shops, mechanical rooms, and other areas where crews specify metal covers, the Mulberry 86401 steel 1-gang and the Mulberry 76432 cold rolled steel 2-gang combination plates are the metal-bodied alternatives, but they are covers only and do not include jacks.
11) We are standardizing white device plates across a building - what pairs with the Eaton 3547-4W telephone plate?
The Eaton 3547-4W is white and flush mounted, so it sits level with adjacent devices. For the switch and receptacle openings on the same walls, white plates such as the Mulberry 86401 1-gang or the Mulberry 76532 765 series 2-gang combination plate keep the finish consistent; the Bryant P8 series 1-gang duplex plate covers straight receptacle locations.
How fast can I get the Eaton 3547-4W delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Eaton 3547-4W come with a warranty?
Absolutely. The Eaton 3547-4W is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Eaton 3547-4W?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Eaton 3547-4W from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!