Cooper Wiring Devices Z-Wave P...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$105.97
Eaton Z-Wave plus decorator switch, Power Failure Memory, 15A, 120V, White, 60 Hz, LED, CF

Cooper Wiring Devices Z-Wave Plus Decorator Smart Switch, 15A, 120V, White

(No reviews yet) Write a Review

Model: RF9601DW

In Stock (leaves warehouse same day if ordered before 3pm ET)

$105.97
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Cooper Wiring Devices Z-Wave Plus Decorator Smart Switch, 15A, 120V, White

The Cooper Wiring Devices Z-Wave Plus Decorator Smart Switch delivers reliable, code-compliant smart lighting control for residential and commercial installations. Rated 15A at 120V, 60 Hz, this single-pole, multi-location three-way decorator switch is finished in White and built to support LED, CFL, incandescent, MLV, ELV, fluorescent, and halogen loads. Backed by cULus Listing and FCC compliance, it includes Power Failure Memory so the switch retains its last state after an outage, and it is sized at 3.81 IN high, 1.8 IN wide, and 1.38 IN deep for standard wallbox installations.

Key Features

  • Amperage Rating: 15A for dependable switching of connected lighting circuits.
  • Voltage Rating: 120V at 60 Hz for standard residential and commercial power systems.
  • Switch Configuration: Single-pole, multi-location three-way design enables control from multiple points in a room or hallway.
  • Wiring Method: Wire leads simplify termination during installation.
  • Broad Load Compatibility: Rated for LED, CFL, incandescent, MLV, ELV, fluorescent, and halogen loads, giving flexibility across lighting types.
  • Power Failure Memory: Automatically restores the last switch state after a power interruption, so lighting resumes as expected.
  • Operating Temperature: Rated for 32°F to 104°F (0°C to 40°C) environments.
  • Decorator Styling: Clean White finish and standard decorator footprint (3.81 IN x 1.8 IN x 1.38 IN) matches common wallplates and devices.

Certifications & Compliance

  • cULus Listed
  • FCC Compliant

Technical Specifications

  • Warranty: 2 year limited
  • Amperage Rating: 15A
  • list_batch: COOPER-20260730

Typical Applications

  • Residential and Commercial Lighting Control
  • Smart Home Automation Systems
  • Multi-Location Three-Way Switching
  • Renovation and New Construction Wiring
  • Z-Wave Smart Lighting Networks
  • Wallbox Installations Requiring a Decorator-Style Switch

Why Cooper Wiring Devices?

Cooper Wiring Devices builds this Z-Wave Plus decorator switch to cULus Listed and FCC Compliant standards, giving electrical professionals a dependable, code-compliant option for smart lighting control. The Power Failure Memory feature, broad load compatibility, and standard decorator footprint make it a practical choice for both new construction and renovation projects requiring reliable multi-location switching backed by a 2 year limited warranty.

Manufacturer Resources

Product Specs

Warranty:
2 year limited
Product Height:
3.81 IN
Switch Classification:
Single-pole, multi-location
Voltage Rating:
120V
Number Of Poles:
Single-pole
Wiring Method:
Wire leads
Operating Temperature:
32°F to 104°F (0°C to 40°C)
Certifications:
cULus Listed
Amperage Rating:
15A
Special Features:
Power Failure Memory
Product Width:
1.8 IN
Load Type:
LED, CFL, incandescent, MLV, ELV, fluorescent, and halogen
Frequency Rating:
60 Hz
Number of ways:
Three-way
Product Length/Depth:
1.38 IN
Compliances:
FCC Compliant
Product Type:
Decorator Switch
Connection Type:
Wire Leads
Listing:
cULus
Product Color:
White
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Lighting Controls & Sensors
Product Length:
1.38 in
Product Weight:
0.33 lb

Cooper Wiring Devices RF9601DW – Frequently Asked Questions

1) Will the Cooper RF9601DW Z-Wave switch work in a three-way circuit with a standard switch at the other location?
The RF9601DW is a single-pole, multi-location switch, not a traditional mechanical three-way. Multi-location control is done through the Z-Wave network by pairing it with a companion Z-Wave accessory switch, not by running a traveler to an ordinary toggle. If you have an existing three-way circuit with a dumb switch at the second box, plan on replacing that second device with a Z-Wave accessory so both points talk over the network.
2) Does this Cooper Z-Wave switch need a neutral wire in the box?
Yes. The RF9601DW terminates with wire leads and, like any powered Z-Wave switch that has to keep its radio alive with the load off, it requires a neutral in the box. Older two-wire switch loops with no neutral present will not support it. Check the box before ordering a fleet of these for a retrofit in an older building.
3) Can I use the Cooper RF9601DW to switch LED and CFL fixtures without flicker or buzzing?
It is rated for LED, CFL, incandescent, MLV, ELV, fluorescent, and halogen loads, so all of those are within spec. Worth noting it is a switch, not a dimmer, so it makes and breaks the circuit at full 15A, 120V rather than phase-cutting. That is why LED and CFL drivers behave cleanly on it, and it is the reason to spec this over a smart dimmer when the fixtures are non-dimmable.
4) Will a Z-Wave decorator switch fit a standard single-gang wallbox with a decorator wallplate?
The device measures 3.81 x 1.8 x 1.38 inches, which is the standard decorator footprint, so it takes an ordinary decorator (rocker-opening) wallplate. The 1.38 inch depth plus the wire leads is what usually decides the job: in shallow retrofit boxes the leads need room to fold, so a deeper or old-work box is the safer call on multi-gang runs.
5) What happens to the Cooper Z-Wave switch after a power outage?
Power Failure Memory returns the switch to the state it was in before the outage, so lights that were off stay off and lights that were on come back on. For a property manager running corridor or common-area lighting, that means no walk-through to reset devices after a utility blip.
6) Is the Cooper RF9601DW smart switch listed for commercial use and FCC compliant?
It is cULus Listed and FCC Compliant, which covers both the US and Canadian listing side and the radio emissions side. Those are the two items an institutional or MRO reviewer typically asks for on a wireless wiring device before it goes into a facility standard.
7) Can I install this Z-Wave switch in an unconditioned garage or outdoor enclosure?
Its operating range is 32 to 104 degrees F (0 to 40 C), so an unheated garage or an exterior enclosure that drops below freezing is outside spec. Conditioned interior spaces, corridors, and tenant units are fine. For exterior lighting, keep the switch inside and let it control the outdoor fixture rather than mounting the device itself in the cold.
8) Is this a dimmer, and what should I order instead if I need dimming?
No, the RF9601DW is an on/off decorator switch, single-pole, rated 15A at 120V. It has no dimming stage. If the fixtures are dimmable and the client wants level control, you need a Z-Wave dimmer instead, and you should confirm the load is MLV, ELV, or dimmable LED before choosing one. Where fixtures are non-dimmable LED or fluorescent, this switch is the correct device.
9) Can I put this Cooper smart switch on a 20A lighting circuit?
The switch itself is rated 15A at 120V, 60 Hz, so the connected load must stay within 15A. It can be fed from a 20A branch circuit the way any 15A-rated device is, provided the load it controls does not exceed its own 15A rating. For heavier lighting loads, spec a 20A-rated control device.
How fast can I get the Cooper Wiring Devices RF9601DW delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Cooper Wiring Devices RF9601DW come with a warranty?
Absolutely. The Cooper Wiring Devices RF9601DW is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Cooper Wiring Devices RF9601DW?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Cooper Wiring Devices RF9601DW from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!