Emtek 2050 European Mortise Deadbolt with Integrated Roller Latch - Square

Standard bored prep plus an edge mortise. The 2050 takes a 2-1/8 inch cross bore, a 1 inch edge bore, and either a 2-3/8 or 2-3/4 inch backset, so it drops into the same bore pattern most residential entry doors already have. The trim plate is 2-1/4 by 2-1/4 inches square, which is what covers the face of the door.

Yes, if those keys are Schlage C. The 2050 is keyed to the Schlage C keyway, the most common residential keyway in North America, so a locksmith can key it into an existing C system. Keying is set when you order: keyed different, keyed alike across multiple units, or keyed to a specific code you supply.

Euro profile. The 2050 case takes a euro profile cylinder, not a round mortise cylinder, so a standard American mortise cylinder will not thread into it. Operation is cylinder outside, thumbturn inside.

It's built as residential hardware, so for a storefront, school, or apartment common door you want a commercial deadbolt with a stated grade instead. Grade 1 options include the Accentra D111 with a 2-3/8 inch backset and the Delaney LM Series single cylinder less core; the Hager 3115 is a Grade 2 fire rated deadbolt on the Schlage C keyway if you want to keep the same key system.

The Emtek 2050 is a mortise deadbolt with a cylinder x thumbturn function, so a bored door needs a tubular deadbolt in the same function. The Dexter DB1000 single cylinder deadbolt is a Grade 1 cylinder x thumbturn deadbolt covering 1-3/8 inch to 1-7/8 inch doors, and the Dexter DB2000 single cylinder deadbolt is the Grade 2 version of the same function for 1-3/8 inch to 1-3/4 inch doors. Both drop into a cross bore and edge bore prep rather than a mortise pocket routed into the door edge.

The Emtek 2050 is a residential product. For a commercial mortise application, the Dormakaba D900 small case mortise deadbolt is a cylinder x thumbturn mortise deadbolt in the D900 Series, keyed different with SC keyways. If the opening allows a bored prep instead of a mortise pocket, the Accentra D111 is a Grade 1 cylinder x thumbturn deadbolt with a 2-3/8 inch backset, and the Delaney LM Series single cylinder deadbolt is Grade 1 in the same function.

The Emtek 2050 needs a 2-1/4 inch by 2-1/4 inch trim footprint and a minimum door thickness of 1-5/8 inch. Narrow stile openings are usually handled by a deadlock case with no rose trim: the Dormakaba M1960 is a single cylinder deadbolt in cylinder x thumbturn with no trim, the International Door Closers DH-1821 is a hook bolt deadlock with a flat faceplate, and the IDC DT-1851 is a long throw deadlatch lock with a flat faceplate.

The Emtek 2050 is cylinder x thumbturn, meaning key outside and thumbturn inside. For a key on both faces, the Baldwin Reserve Contemporary Square and Contemporary Round deadbolts are double cylinder, the Delaney LU Series is a Grade 2 double cylinder deadbolt in a stainless steel US32D finish, the Dexter DB1000 double cylinder is Grade 1 for 1-3/8 inch to 1-7/8 inch doors, and the Design Hardware D1 Series is a Grade 1 extra heavy duty double cylinder deadbolt for 1-3/4 inch doors.

The Emtek 2050 states a minimum door thickness of 1-5/8 inch, so a thinner door needs a different lock. The Deltana 7312KA2 covers 1-3/8 inch to 2 inch doors, the Dexter DB1000 covers 1-3/8 inch to 1-7/8 inch, the Hager 3215 covers 1-3/8 inch to 1-3/4 inch, and the Cal-Royal ED500 covers 1-3/8 inch to 1-3/4 inch with an adjustable backset.

The Emtek 2050 is supplied in Schlage C keyway. The Hager 3115 is a Grade 2 cylinder x thumbturn deadbolt with a Schlage C keyway, the Hager 3118 is a Grade 1 classroom deadbolt with Schlage C and a 6-pin cylinder, the Hager 3214 is a Grade 2 double cylinder with Schlage C, and the Dormakaba D900 mortise deadbolt is furnished with SC keyways. Those are the ones that can be brought onto an existing Schlage C master key system without a cylinder swap.

The Emtek 2050 is a residential brass mortise deadbolt with a euro profile cylinder. Where a fire rated opening is involved, the Hager 3115, 3118, 3214 and 3215 deadbolts all carry a fire rating and cover 1-3/8 inch to 1-3/4 inch doors, and the Cal-Royal CRB800 is a heavy duty single cylinder deadbolt with a UL 3-hour fire rated latch in cylinder x thumbturn.

The Emtek 2050 is keyed with a euro profile cylinder in Schlage C. If the facility standardizes on interchangeable cores instead, the Arrow E61 is a Grade 2 single cylinder deadlock with SFIC prep less core for 1-3/8 inch to 1-3/4 inch doors, the Deltana CL200LAIC is a Grade 2 single deadbolt with interchangeable core prep and a 2-3/4 inch backset, and the Delaney LM Series is a Grade 1 single cylinder less core deadbolt.

No handing to specify. The 2050 is non-handed, so the same part goes on a left or right hand door and you don't have to pull the swing off the schedule before you order. That matters more here than on a plain deadbolt because the case also carries a roller latch, and roller latches on many other locks are handed.

It holds the door closed when the deadbolt is retracted. A euro mortise deadbolt on its own leaves the door free to swing, so the roller latch keeps it shut against a strike without any latch handle, then rolls out of the way when you push or pull. That's why this is used on doors with a separate pull or handle set rather than a latching knob.

Yes. Keyed alike is an option at order time, so every unit opens on the same key, and you can also submit a specific key code to fold them into a system you already run. Since it's Schlage C, that system can include the Schlage-keyed locks already on the other doors.

The Emtek 2050 uses square 2-1/4 inch by 2-1/4 inch trim in a contemporary look. In a bored deadbolt with square trim, the Bravura 310SC Elite is a Grade 2 contemporary square deadbolt in cylinder x thumbturn, the Callan Model 200S is a Grade 3 single cylinder square trim deadbolt in the same function, and the Brinks Mendocino Series is a contemporary square single cylinder deadbolt with a 4-way adjustable backset. The Baldwin Reserve Contemporary Square deadbolt carries the square shape in a double cylinder function instead of a thumbturn.

The Emtek 2050 is a mechanical keyed deadbolt with no electronic function. Electronic alternatives include the Codelocks CL2210 electronic mortise deadbolt, which keeps a mortise case, and surface-mounted options such as the Codelocks CL2200 electronic surface deadbolt in brushed steel, a medium duty unit. For credential-based multifamily use, the Dormakaba Saffire LX-D is an RFID electronic deadbolt with BLE and electronic lock override, and the Dormakaba Nova-D is an RFID multihousing smart electronic deadbolt.

No. The Arrow 460 is a mortise lock strike for latchbolt and deadbolt functions with a straight lip, which is the jamb-side piece that receives a bolt, not a lock. The Emtek 2050 is the lock itself, a mortise deadbolt with an integrated roller latch and a keyed euro profile cylinder. Similarly, the BEST 8T is a tubular deadbolt tube component and the Baldwin Reserve 8BR0618001 is a deadbolt spacer, both parts of an assembly rather than a complete deadbolt.

The Emtek 2050 combines a deadbolt with an integrated roller latch, so the roller holds the door closed without a knob or lever throwing a latchbolt. If the opening needs a latching deadlatch instead, the International Door Closers DL-4511 is a deadlatch lock with a flat faceplate. If the inside face should have no cylinder at all, the Arrow E60 is a Grade 2 exit deadlock in blank plate x thumbturn for 1-3/8 inch to 1-3/4 inch doors.

The Emtek 2050 is a residential cylinder x thumbturn deadbolt. Classroom function deadbolts in the comparable set are the Falcon D111, a Grade 1 heavy duty classroom deadbolt with adjustable backset, the Falcon D211, a Grade 2 medium duty classroom function deadbolt with single cylinder operation, and the Hager 3118, a Grade 1 classroom deadbolt with Schlage C keyway and 6-pin cylinder for 1-3/8 inch to 1-3/4 inch doors.

Four: polished stainless steel (PSS), brushed stainless steel (SS), satin brass lifetime PVD over stainless (SSPVD4), and flat black (US19). The trim is stainless steel with a square, contemporary profile, so it pairs with square-rose Emtek levers and knobs rather than the traditional rounded ones.

The Emtek 2050 is offered in Polished Stainless Steel, Brushed Stainless Steel, Satin Brass Stainless Steel Lifetime, and Flat Black. Among comparable deadbolts, the Delaney LU Series double cylinder is furnished in Stainless Steel US32D, the Delaney LM Series single cylinder less core is in Dull Chrome US26D, and the Codelocks CL2200 electronic surface deadbolt is in Brushed Steel.