Emtek 2107 Modern Rectangular Pocket Door Lock (2-1/2" x 4-1/2") - Passage

Standard 2-1/8 inch cross bore. That is the same bore diameter a standard tubular knob or lever takes, so on a door already drilled for pocket door hardware at 2-1/8 inches the face prep is done and you are fitting the edge mortise and strike. If the existing hole is smaller, it has to be opened up to 2-1/8 inches before the 2107 goes in.

The Emtek 2107 is a non-keyed passage lock, so it latches the pocket door but gives no locking at all, which is not what a bath or bedroom door needs. In privacy function the cross-brand choices are the Omnia 7012/L Modern Rectangular Pocket Door Lock, which pairs privacy with an emergency release, the Weslock 0577 Rectangular Privacy Pocket Door Lock with adjustable backset and full lip strike, and the Deltana SDL25 Pocket Door Lock in a 2-1/2" x 2-3/4" privacy plate. The Omnia 7012/L holds the same modern rectangular trim shape as the Emtek 2107, so a house running the 2107 on the passage openings can carry the look onto the bath door.

The Emtek 2107 is a passage pocket door lock with a rectangular 2-1/2" x 4-1/2" plate, meaning it latches the door but does not lock. The nearest matches from other brands in the same function are the Omnia 7012/N Modern Rectangular Pocket Door Passage Lock, which is supplied with a mortise edge pull, the Weslock 0527 Rectangular Passage (No Locking) Pocket Door Lock, and the Deltana SDP25 Pocket Door Lock in passage function. Trim footprint is where they part company: the Deltana SDP25 plate is 2-1/2" x 2-3/4" against the Emtek 2107's 2-1/2" x 4-1/2", so the visible plate is shorter, while the Omnia 7012/N carries the same modern rectangular styling.

No. The Emtek 2107 pocket door lock fits door thickness 1-3/8" to 1-3/4", so a 2 inch slab is past its top end. Staying in passage function, the Weslock 0527 Rectangular Passage (No Locking) Pocket Door Lock carries a door thickness range of 1-3/8" to 2" and takes that slab. If the same 2 inch door needs to lock rather than just latch, the Weslock 0577 Rectangular Privacy Pocket Door Lock carries the same 1-3/8" to 2" range and comes with an adjustable backset and a full lip strike.

Both are offered on the 2107, so pick the one that matches what is already cut into the door edge. If you are retrofitting, look at the mortise the old latch came out of: a routed pocket with rounded ends takes the round corner faceplate, a chiselled square pocket takes the square corner. Choosing the wrong one means either recutting the mortise or filling the corners.

Twelve finishes, which is the full list if you are standardizing a house or a floor of units on one look: Medium Bronze (MB), Tumbled White Bronze (TWB), Oil Rubbed Bronze (US10B), Polished Nickel Lifetime (US14), Satin Nickel (US15), Pewter (US15A), Flat Black (US19), Polished Chrome (US26), Polished Brass Lifetime (US3), Unlacquered Brass (US3NL), Satin Brass (US4), and French Antique (US7). The screws come finished to match, so a run of pocket doors ordered in one code stays consistent down to the fasteners.

The 2107 trim measures 2-1/2 x 4-1/2 inches in a rectangular shape. That is a taller footprint than several pocket door sets, so it will usually cover a smaller previous plate rather than leave a gap: the Deltana SDP25 passage pocket door lock, for example, is 2-1/2 x 2-3/4 inches. Coming off something larger is the risk. The Deltana SDL60 decorative pocket door lock is a 6 inch plate, in privacy function, and a cutout sized for that will show around the 2107.

No. The Emtek 2107 fits door thickness 1-3/8" to 1-3/4", so a 1-5/16" slab falls below its minimum. The Pamex PF1 Square Style Sliding Door Lock and the Pamex PF2 Round Sliding Door Lock both carry a door thickness range of 1-5/16" to 1-9/16" and cover a slab that thin, in square and round trim respectively. Note the trade in the other direction: the Pamex range stops at 1-9/16", while a 1-3/4" slab sits inside the Emtek 2107 range, so a building with both thin and standard pocket doors will not be served by one part.

No. The Emtek 2107 is the latch and face trim, sold as a complete set with screws and strikeplate, and it goes into a pocket door that is already framed and hung. The rolling and framing hardware are separate items: the NGP SLAL250PD72 is a 72" aluminum pocket door track rated up to 250 pounds, and the Orca Hardware PK1200 is a pocket door frame set for 1" or 1-3/4" doors. On a new opening, one of those plus a lock like the Emtek 2107 is the full scope.

The Emtek 2107 is a passage set, so it comes with a working latch and strikeplate. When the door only needs a way to pull it out of the pocket and no latching, the Omnia 7012/PD Modern Rectangular Pocket Door Lock Set is a pair dummy with a mortise edge pull in the same modern rectangular trim. Dummy is trim on both faces with no latch mechanism, so it is the right call on a door that is held closed by something other than the hardware.

The Emtek 2107 uses a rectangular 2-1/2" x 4-1/2" plate. For round trim in the same passage function, the Weslock 0627 Round Passage Pocket Door Lock comes with an adjustable backset and a full lip strike, and the Pamex PF2 Round Sliding Door Lock is built to a 2-3/8" backset with a door thickness range of 1-5/16" to 1-9/16". If the round openings also have to lock, the Orca Hardware PDLRD is a round pocket door lock in privacy function, and the Orca Hardware PDLSQ is the square-trim version of the same privacy lock.

Plate size varies widely across pocket door locks, so measure the old plate before ordering. The Emtek 2107 plate is 2-1/2" x 4-1/2". The Deltana SDP25 in passage and the Deltana SDL25 in privacy both use a 2-1/2" x 2-3/4" plate, the Deltana SDLA325 heavy-duty adjustable privacy lock uses a 3-1/4" x 2-1/4" plate, and the Deltana SDL60 decorative privacy lock is a 6" plate. Anything shorter than 4-1/2" will not hide the cutout a 4-1/2" plate leaves behind, while the 6" Deltana SDL60 covers past it.

The Emtek 2107 is designated residential. Where a facility is standardizing pocket door hardware and the opening has to lock, the Rockwood 891 Pocket Door Privacy Latch and the Deltana SDLA325 Heavy-Duty Pocket Door Lock, which is adjustable and uses a 3-1/4" x 2-1/4" plate, are the privacy-function alternatives to look at. Both are single-part standardizations across a run of doors, the same way the Emtek 2107 is on residential passage openings.

Brass throughout, which is what carries the threads and the latch mechanism on a part that gets grabbed every day. One finish choice behaves differently from the rest: Unlacquered Brass (US3NL) is bare, uncoated brass and it will darken and patina with handling, on purpose. If you want the brass look to stay bright and uniform across a set of doors, order Polished Brass Lifetime (US3) or Satin Brass (US4) instead.

Both are modern rectangular passage pocket door sets, so neither one locks. The Emtek 2107 is brass, measures 2-1/2 x 4-1/2 inches, fits doors 1-3/8 to 1-3/4 inches thick on a 2-1/8 inch cross bore, ships with a strikeplate and finish matching screws, and comes in twelve finishes. The Omnia 7012/N is described as a modern rectangular pocket door passage lock with a mortise edge pull. If the pull detail is what you are specifying around, that is the distinction to work from.

The Emtek 2107 is brass, in both substrate and material. Among the cross-brand pocket door locks, the Omnia 7035/A Keyed Entry Pocket Door Lock is built with solid brass construction, alongside its modern rectangular trim. Material matters on a pocket door because the face trim is handled every time the door is moved out of the pocket.