Emtek 2154 Narrow Modern Recta...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$354.00
$283.20
Emtek Emtek 2154 Narrow Modern Rectangular Pocket Door Mortise Lock (2" x 7-1/4") - Passage EMTEK-2154

Emtek 2154 Narrow Modern Rectangular Pocket Door Mortise Lock (2" x 7-1/4") - Passage

(No reviews yet) Write a Review

Model: 2154-US26
From the Brass Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$354.00
$283.20
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Emtek Narrow Modern Rectangular Pocket Door Mortise Locks (2" x 7-1/4")

  • Sold as complete set.
  • Includes screws and strikeplate.
  • Handing NOT Required
  • Minimum door thickness is 1-3/8". Must specify door thickness for ALL functions.
  • Backset is 2-1/8"
  • Trim plates are 1/8" thick.

NOTE: Emtek pocket door mortise locks can be keyed alike with each other, but may not be keyed alike with any other Emtek products

 

Specifications:

  • Backset: Adjustable 2-3/8" or 2-3/4"
  • Cross Bore: 2-1/8"
  • Door Thickness: 1-3/8" to 1-3/4"
  • Latch Faceplate: Round or Square Corner
  • Material: Brass

 

Manufacturer Resources:

Product Specs

Subcategory:
Pocket Door Mortise Locks
Collection:
Brass
Product Type:
Pocket Door Hardware
Product Group:
Sliding Door and Barn Door Hardware
Product Subgroup:
Pocket Door Locks
Commercial/Residential:
Residential
Lock Type:
Mortise
Series:
Narrow Modern Rectangular
Theme:
Contemporary
Electronic:
No
Keyed:
No
Keyed Function:
Non-Keyed
Lock Function:
Passage
MAP Policy:
Yes
Product Attribute:
Mortise Locks
Product Model:
2154
Product Function:
Passage/Hall/Closet
Product Size:
2" x 7-1/4"
Product Shape:
Rectangular
Product Style:
Contemporary
Product Material:
Brass
Product Category:
Sliding Door and Barn Door Hardware
Product Substrate:
Brass
Department:
Door Hardware

Emtek 2154-US26 – Frequently Asked Questions

1) Does the Emtek 2154 pocket door lock latch or lock at all, or is it just a pull?
It's a passage set, so there is no locking and no key. The 2154 latches the door closed and releases from either side, which is what you want on a hall, closet, laundry or pantry pocket door. For a bathroom or bedroom pocket door you need a privacy version with a thumbturn and emergency release instead, such as the Omnia 7012/L or the Weslock 0577.
2) Do I need to order the Emtek 2154 pocket door lock left or right hand?
No handing to specify. The 2154 is non-handed, so the same set works on a pocket door that slides either direction. What you do have to call out is the door thickness and the finish.
3) What do I have to buy separately to install an Emtek 2154 pocket door lock?
Nothing on the hardware side. The 2154 ships as a complete set with the mortise lock body, both trim plates, the strikeplate and the screws. What it does not include is the pocket door track and frame, so if you are building the opening rather than replacing hardware in an existing one, you still need a frame kit like the Orca PK1200 or an aluminum track such as the NGP SLAL250PD72.
4) How much of the door edge does the Emtek 2154 mortise lock need, and how deep do I bore?
Backset on the 2154 is 2-1/8 inches from the door edge to the center of the cross bore, and the cross bore itself is 2-1/8 inches. That is the pocket you have to mortise and bore in the slab before the lock body drops in. The trim plates sit 1/8 inch proud of the face, which matters on a pocket door because anything thicker starts to catch the jamb pocket as the door runs in.
5) Which pocket door lock do I order if the door needs a key?
Not the Emtek 2154 - it is a non-keyed passage unit. For a keyed pocket door in a comparable modern rectangular trim, the Omnia 7035/A is a keyed entry pocket door lock with modern rectangular trim and solid brass construction. That is the one to spec for an office or storage pocket door where the opening has to be secured rather than just latched.
6) What is the closest equivalent to the Emtek 2154 pocket door mortise lock from another brand?
The Omnia 7012/N Modern Rectangular Pocket Door Passage Lock with Mortise Edge Pull is the nearest match in form and function. Both are passage-function pocket door locks with modern rectangular trim, and the Emtek 2154 is a passage mortise lock in brass measuring 2 inches by 7-1/4 inches. The Omnia 7012/N pairs its rectangular trim with a mortise edge pull, so if the opening needs a recessed pull to draw the door out of the pocket, that is the difference to weigh. A property manager standardizing rectangular trim across a run of pocket doors can use either and stay visually consistent.
7) I need a pocket door lock that actually locks for a bathroom - what do I use instead of the Emtek 2154?
The Emtek 2154 is a passage function with no locking and no keying, so it is wrong for a bath or bedroom. For a privacy pocket door in the same modern rectangular look, the Omnia 7012/L Modern Rectangular Pocket Door Lock adds a privacy function with an emergency release. The Weslock 0577 Rectangular Privacy Pocket Door Lock is another rectangular privacy option, with an adjustable backset and full lip strike, and it covers doors 1-3/8 inch to 2 inch thick. On a round trim opening, the Orca Hardware PDLRD is the privacy version in a round plate.
8) My pocket door is thinner than 1-3/8 inch - what pocket door lock fits it?
The Emtek 2154 needs a minimum door thickness of 1-3/8 inch. For a thinner slab, the Pamex PF1 Square Style Sliding Door Lock and the Pamex PF2 Round Sliding Door Lock both cover a door thickness range of 1-5/16 inch to 1-9/16 inch, which reaches below 1-3/8 inch. Pick the PF1 for square trim and the PF2 for round; the PF2 uses a 2-3/8 inch backset.
9) What is a passage pocket door alternative to the Emtek 2154 if the 2 by 7-1/4 inch plate is too tall for my door?
Two shorter passage options. The Deltana SDP25 is a 2-1/2 x 2-3/4 inch passage pocket door lock, a much more compact plate. The Omnia 7012/N is a modern rectangular passage lock that comes with a mortise edge pull. If the plate height isn't the problem but door thickness is, the Weslock 0527 rectangular passage lock covers 1-3/8 inch through 2 inch doors, so it goes thicker than the 2154's 1-3/4 inch top end.
10) How big are the Emtek 2154 trim plates on the face of the door?
The face plates measure 2 x 7-1/4 inches, a narrow rectangular profile. That width is the one to check against a glazed or narrow-stile pocket door: you need 2 inches of flat face either side of the bore for the plate to land clean.
11) Can I key Emtek pocket door locks alike with the rest of the Emtek locks in the house?
Not with the rest of the house. Emtek pocket door mortise locks can be keyed alike to each other, but they will not key alike with other Emtek products. The 2154 itself is a non-keyed passage set, so keying only becomes a question if you are mixing it with keyed pocket door locks on other openings.
12) What finishes does the Emtek 2154 narrow rectangular pocket door lock come in?
Seven: Oil Rubbed Bronze (US10B), Polished Nickel Lifetime (US14), Satin Nickel (US15), Flat Black (US19), Polished Chrome (US26), Unlacquered Brass (US3NL) and Satin Brass (US4). All of them are on solid brass, so on a run of doors you can match the 2154 to the same US number you already specified on the swinging hardware. Unlacquered brass is the one that will patina rather than hold its as-shipped look.
13) Is the Emtek 2154 pocket door lock rated for a commercial building or apartment turnover?
It's a residential-grade set. For multifamily unit interiors and single family work that's the normal choice, but for a high-traffic commercial opening you want a heavier pocket door latch, such as the Rockwood 891 or the Deltana SDLA325 heavy-duty adjustable lock.
14) Is there a simpler passage pocket door pull than the Emtek 2154 for a closet?
Yes. The Emtek 2154 is a mortise lock with a 2 inch by 7-1/4 inch rectangular trim plate. For a plain closet pull with the same passage function and a much smaller footprint, the Deltana SDP25 Pocket Door Lock is a passage unit with a 2-1/2 inch by 2-3/4 inch plate. The Weslock 0527 Rectangular Passage Pocket Door Lock is another no-locking passage option and covers door thicknesses of 1-3/8 inch to 2 inch. The Weslock 0627 is the same passage function in a round plate if the other doors on the job use round trim.
15) Will the Omnia 7012/PD work in place of the Emtek 2154?
No. The Omnia 7012/PD is a pair dummy set - the trim and edge pull look the part but there is no working latch. The Emtek 2154 is a passage mortise lock, so it latches the door closed. Order the 7012/PD only for a decorative or inactive pocket door leaf where nothing needs to catch.
16) Does ordering the Emtek 2154 get me the pocket door track and frame too?
No. The Emtek 2154 is the lock itself, sold as a complete set with screws and strikeplate. The pocket frame and hanging hardware are separate: the Orca Hardware PK1200 is a pocket door frame kit sized for 1 inch or 1-3/4 inch doors, and the NGP SLAL250PD72 is a 72 inch aluminum pocket door track rated to 250 pounds. A contractor framing a new pocket opening needs one of those plus the lock, not the lock alone.
17) What is the difference between the Emtek 2154 and the heavy-duty Deltana pocket door locks?
The Emtek 2154 is a passage function in a 2 inch by 7-1/4 inch rectangular brass trim, so it latches without locking. The Deltana SDLA325 is a heavy-duty pocket door lock with an adjustable body and a 3-1/4 inch by 2-1/4 inch plate in a privacy function, and the Deltana SDL60 is a decorative 6 inch privacy lock. Both Deltana units add a privacy turn the Emtek 2154 does not have, and both use a shorter, wider plate than the narrow 7-1/4 inch Emtek trim - worth checking against the existing mortise cutout on a replacement.
18) Is the Rockwood 891 an alternative to the Emtek 2154 for a commercial restroom pocket door?
They do different jobs. The Rockwood 891 is a pocket door privacy latch, so it secures the opening from the inside - the right function for a restroom. The Emtek 2154 is a passage mortise lock with no locking and no keying, and it is a residential brass unit. On a commercial restroom pocket door, specify the privacy latch, not the passage lock.
19) Can I use the Emtek 2154 on a pair of pocket doors that meet in the middle?
Not as a matched pair. The 2154 is a single-door set with a latch and a strikeplate, and it's built to strike a jamb. On a biparting pocket opening where the two leaves meet each other with no jamb between them, you want dummy trim on the meeting leaves, such as the Omnia 7012/PD pair dummy pocket door set, and edge pulls for the operation.
20) Is the Emtek 2154 solid brass or plated pot metal?
Solid brass throughout, both the substrate and the finish collection. That matters on unlacquered brass in particular, since the finish is the material rather than a coating, so wear shows as patina instead of a plating break.
21) I want square trim instead of the narrow rectangular Emtek plate - what are my options?
The Emtek 2154 uses a narrow rectangular trim measuring 2 inches by 7-1/4 inches. For a square plate, the Orca Hardware PDLSQ is a square pocket door lock in privacy function and the Pamex PF1 is a square style sliding door lock. If the job mixes trim shapes across doors, the Deltana SDL25 is a compact 2-1/2 inch by 2-3/4 inch privacy plate that reads closer to square than the narrow Emtek profile.
How fast can I get the Emtek 2154-US26 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 2154-US26 come with a warranty?
Absolutely. The Emtek 2154-US26 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 2154-US26?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Emtek 2154-US26 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!