Emtek 2155 Narrow Modern Recta...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$347.00
$277.60

Emtek 2155 Narrow Modern Rectangular Pocket Door Mortise Lock (2" x 7-1/4") - Privacy

(No reviews yet) Write a Review

Model: 2155-US10B
From the Brass Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$347.00
$277.60
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks

Emtek Narrow Modern Rectangular Pocket Door Mortise Locks (2" x 7-1/4")

  • Privacy function
  • Sold as complete set.
  • Includes screws and strikeplate.
  • Handing NOT Required
  • Minimum door thickness is 1-3/8". Must specify door thickness for ALL functions.
  • Backset is 2-1/8"
  • Trim plates are 1/8" thick.

 

NOTE: Emtek pocket door mortise locks can be keyed alike with each other, but may not be keyed alike with any other Emtek products

 

Specifications:

  • Backset: Adjustable 2-3/8" or 2-3/4"
  • Cross Bore: 2-1/8"
  • Door Thickness: 1-3/8" to 1-3/4"
  • Latch Faceplate: Round or Square Corner
  • Material: Brass

 

Manufacturer Resources:

Product Specs

Subcategory:
Pocket Door Mortise Locks
Collection:
Brass
Product Type:
Pocket Door Hardware
Product Group:
Sliding Door and Barn Door Hardware
Product Subgroup:
Pocket Door Locks
Commercial/Residential:
Residential
Lock Type:
Mortise
Series:
Narrow Modern Rectangular
Theme:
Contemporary
Electronic:
No
Keyed:
No
Keyed Function:
Non-Keyed
Lock Function:
Privacy/Bed/Bath
MAP Policy:
Yes
Product Attribute:
Mortise Locks
Product Model:
2155
Product Function:
Privacy/Bed/Bath
Product Size:
2" x 7-1/4"
Product Shape:
Rectangular
Product Style:
Contemporary
Product Material:
Brass
Product Category:
Sliding Door and Barn Door Hardware
Product Substrate:
Brass
Department:
Door Hardware

Emtek 2155-US10B – Frequently Asked Questions

1) Can I key Emtek pocket door mortise locks alike with the rest of my Emtek hardware?
No, and there are two reasons. The 2155 in privacy function is non-keyed, so it has no cylinder to key at all. And on the Emtek pocket door mortise locks that are keyed, they can be keyed alike with each other but will not necessarily key alike with other Emtek products. If you want a keyed pocket door opening, the Omnia 7035/A is a keyed entry pocket door lock with modern rectangular trim.
2) Is there a keyed pocket door lock instead of the privacy Emtek 2155?
The Emtek 2155 is non-keyed with a privacy/bed/bath function, so it is not intended for an opening that has to be secured with a key. The Omnia 7035/A Keyed Entry Pocket Door Lock with Modern Rectangular Trim and Solid Brass Construction is the keyed entry option in the pocket door group, in a modern rectangular trim like the 2155. Note that Emtek pocket door mortise locks can be keyed alike with each other but may not be keyed alike with other Emtek products, so a keyed pocket door opening within an Emtek suite is worth planning before order.
3) Which pocket door locks look like the Emtek 2155 but do not lock?
Several pocket door locks share a modern rectangular look with the Emtek 2155 but carry a passage or dummy function instead of privacy. The Omnia 7012/N Modern Rectangular Pocket Door Passage Lock with Mortise Edge Pull is passage, the Omnia 7012/PD Modern Rectangular Pocket Door Lock Set with Mortise Edge Pull is a pair dummy, the Weslock 0527 Rectangular Passage pocket door lock is explicitly no-locking, and the Deltana SDP25 at 2-1/2 inch by 2-3/4 inch is passage. The Emtek 2155 is privacy/bed/bath, so it throws a thumbturn-operated lock; the four above will not. Match the function before you order for a bathroom opening.
4) What is the closest equivalent to the Emtek 2155 pocket door mortise lock in a rectangular privacy trim from another brand?
The Emtek 2155 is a privacy-function pocket door mortise lock with a narrow modern rectangular trim measuring 2 inches by 7-1/4 inches. Two other rectangular privacy pocket door locks cover the same function: the Weslock 0577 Rectangular Privacy Pocket Door Lock with Adjustable Backset and Full Lip Strike, and the Omnia 7012/L Modern Rectangular Pocket Door Lock with Privacy Function and Emergency Release. All three lock a bed or bath pocket door from the inside. The Weslock 0577 covers doors 1-3/8 inch to 2 inch thick, so it reaches slightly thicker slabs than the 2155, which is built for 1-3/8 inch minimum door thickness with the thickness specified at order.
5) Does ordering the Emtek 2155 cover the pocket door track and frame too?
No. The Emtek 2155 is a pocket door mortise lock sold as a complete lock set with screws and strikeplate, in brass. The rolling hardware and pocket framing are separate items: the NGP SLAL250PD72 72 inch Pocket Door Aluminum Track carries up to 250 pounds, and the Orca Hardware PK1200 Pocket Door Frame Kit is a frame set for doors 1 inch or 1-3/4 inch thick. On a new pocket door opening, the lock, the track, and the frame kit are three separate lines on the order.
6) Which pocket door privacy lock has an emergency release for a bathroom that needs to be opened from outside?
The Omnia 7012/L Modern Rectangular Pocket Door Lock is the privacy pocket door lock that carries an emergency release, letting the door be unlocked from the hall side. The Emtek 2155 is a privacy/bed/bath mortise lock in a narrow modern rectangular 2 inch by 7-1/4 inch trim, non-keyed, sold as a complete set with screws and strikeplate. For a bath or bedroom where facility staff need outside release, the 7012/L answers that requirement directly.
7) What pocket door privacy lock should be used on a thinner door than the Emtek 2155 accepts?
The Emtek 2155 requires a minimum door thickness of 1-3/8 inches. For a thinner slab, the Pamex PF1 Square Style Sliding Door Lock and the Pamex PF2 Round Sliding Door Lock both cover a 1-5/16 inch to 1-9/16 inch door thickness range, reaching below 1-3/8 inch. The PF2 carries a 2-3/8 inch backset. Confirm the measured slab thickness before choosing, since the 2155 requires door thickness to be specified for all functions.
8) Do I need to know the handing before ordering an Emtek 2155 pocket door lock?
No. Handing is not required on the 2155, so the same part works on a pocket door that slides either direction. What you do have to nail down is the door thickness, which is specified at order time, and the finish. That makes it an easy one to spec off a plan when you have not been to the opening yet.
9) Does the Emtek 2155 come with the strike, or do I order that separately?
Sold as a complete set, with screws and the strikeplate included. You are not ordering trim, lock body and strike as separate line items. The latch faceplate is available round corner or square corner, so match that to the existing mortise cut if you are swapping a lock out and want to reuse the rout in the door edge.
10) I have a rectangular Emtek pocket door lock on the other bathrooms. Will this match?
The 2155 is the Narrow Modern Rectangular series, a contemporary rectangular trim at 2 by 7-1/4 inches. If the doors you are matching carry that same narrow rectangular plate, ordering the 2155 in the same US finish code gets you a visual match across the fleet. If the existing plates are round, the Orca Hardware PDLRD is a round privacy pocket door lock and the PDLSQ is the square version.
11) Is the Emtek 2155 rated for commercial traffic, and what else is available for a heavier duty pocket door?
The Emtek 2155 is designated residential, in a solid brass narrow modern rectangular mortise lock with privacy function. For a pocket door opening that wants a heavier build on the same privacy function, the Deltana SDLA325 Heavy-Duty Pocket Door Lock is an adjustable privacy unit with a 3-1/4 inch by 2-1/4 inch trim, and the Rockwood 891 Pocket Door Privacy Latch is another privacy latch in the group. Match the function first, then the duty expectation for the traffic on that door.
12) What is a simpler pocket door privacy lock than the Emtek 2155 for a compact trim?
The Emtek 2155 uses a long narrow rectangular trim, 2 inches by 7-1/4 inches, mortised into the door edge. Where a short trim suits the door better, the Deltana SDL25 Pocket Door Lock is a privacy unit with a 2-1/2 inch by 2-3/4 inch trim, and the Deltana SDLA325 Heavy-Duty Pocket Door Lock is an adjustable privacy unit at 3-1/4 inch by 2-1/4 inch. The Rockwood 891 Pocket Door Privacy Latch is another privacy option in this group. All lock a pocket door for bed or bath use; they differ in trim footprint and in how much of the door edge and face gets prepped.
13) If a pocket door only needs a pull and no lock, what replaces the Emtek 2155?
The Emtek 2155 carries a privacy/bed/bath function with a thumbturn-operated lock. For a closet or hall pocket door that only needs to be pulled shut, the Omnia 7012/N Modern Rectangular Pocket Door Passage Lock with Mortise Edge Pull and the Omnia 7012/PD pair dummy set with mortise edge pull both give a rectangular trim with an edge pull and no locking. The Weslock 0627 Round Passage Pocket Door Lock with Adjustable Backset and Full Lip Strike is the round-trim passage option. These skip the privacy mechanism entirely.
14) Is the Emtek 2155 electronic or does it need any wiring?
Purely mechanical. No wiring, no battery, no power. It is a brass mortise lock body with a thumbturn privacy function, so it keeps working in an outage and there is nothing to commission after install.
How fast can I get the Emtek 2155-US10B delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 2155-US10B come with a warranty?
Absolutely. The Emtek 2155-US10B is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 2155-US10B?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Emtek 2155-US10B from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.