Emtek 2213 Square Brass Flush Pulls (2-1/2" x 2-1/2")

Yes. The 2213 square flush pull is made for the standard 2-1/8 inch door prep, so it drops into the same bore a standard pocket door pull or bored lock cutout leaves behind. The trim face measures 2-1/2 by 2-1/2 inches, which covers the bore and a little beyond it, so minor tear-out at the edge of the hole gets hidden.

Projection is 1/8 inch, so the 2213 sits essentially flush with the door face. That is what lets it pass into a pocket or run past a wall-mounted barn door track guide without catching. A surface-mounted handle or a knob will not do that on a pocket door.

Residential. Emtek classes the 2213 as residential hardware, which puts it in single-family, condo, and light multi-family work, and in commercial spaces where the opening is decorative rather than high traffic. For a corridor pocket door in a school, hospital, or hotel back-of-house, spec a commercial-grade flush pull instead.

It is a pull only. The 2213 is a flush cup you grip to slide the door; there is no latch, no privacy turn, and no locking function in it. If the pocket door needs to lock for a bathroom or bedroom, you need a pocket door lock or privacy set instead, and the 2213 gets used on the opposite face as the trailing-edge pull.

The Emtek 2213 is a square flush cup pull, 2-1/2 inches by 2-1/2 inches, made of brass with a 1/8 inch projection, so the whole pull sits essentially flat in the door face and is gripped by reaching into the recessed cup. The Baldwin 0397 SOL is a flush cup handle combined with a solid spindle ring pull, so it adds a ring on a spindle that a hand can hook and pull with. Choose the 2213 when the hardware has to stay flat to the face and the cup recess is all the grip you need, and the 0397 SOL when you want a ring to take hold of.

Brass, both in material and substrate, across every finish offered. That matters on a pull that gets fingernails and rings dragged through the cup daily, and it is why the unlacquered brass version (2213US3NL) will patina rather than flake the way a plated zinc pull does.

Twelve finishes: Polished Brass Lifetime (US3), Unlacquered Brass (US3NL), Satin Brass (US4), French Antique (US7), Oil Rubbed Bronze (US10B), Polished Nickel Lifetime (US14), Satin Nickel (US15), Pewter (US15A), Flat Black (US19), Polished Chrome (US26), Medium Bronze (MB), and Tumbled White Bronze (TWB). Those are Emtek's standard finish codes, so a 2213 in US15 keys to the same US15 on Emtek levers and hinges elsewhere in the building.

The Emtek 2213 is a square brass flush pull, 2-1/2 inches by 2-1/2 inches, in a contemporary style, so its outline matches square rosettes, square escutcheons and other straight-edged trim. The Baldwin 0397 SOL is from the Estate series and pairs a flush cup handle with a solid spindle ring pull, a more traditional profile. For a square-detailed contemporary opening, the 2213 keeps the geometry consistent; for a traditional or period interior, the Estate ring pull reads correctly. On a multi-door job, pick one and carry it through so all the openings match.

Plan on two per door leaf for a pocket door, one on each face, so the door can be pulled closed from inside the room and pulled open from the pocket side. A pair of bypass or barn doors needs two per leaf as well. The 2213 is sold by finish, so order the quantity in one finish code to keep the whole opening matched.