You may also like
Emtek 2242 Extended Button Tip (Used with Hinge Pivot Stop on Solid Brass Hinge)
Model: EMTEK-2242
Emtek 2242 Extended Button Tip (Used with Hinge Pivot Stop on Solid Brass Hinge)Emtek 2241 Hinge Pivot Stop requires this 2242 Extended Button TipFor use with Emtek Solid Brass Hinges. Not compatible...
Emtek
Starting at
$6.00
$4.80
Deltana HPH89 Hinge Pin Stop, Hinge Mounted For Brass Hinges
Model: DEL-HPH89
Hinge Pin Stop, Hinge Mounted for Brass HingesDeltana Hinge pin door stops are designed to install on an existing Hinge to restrict how far a door will swing open. They are available in an array of...
Deltana
Starting at
$13.90
$11.38
Emtek Hinge Pivot Stop
-
Features:
- Constructed of solid brass for durability
- Requires extended button tip (ProductID: 2242) when used with solid brass hinges
- Not compatible with steel residential duty hinges
- Emtek provides a limited lifetime warranty
Product Technologies:
Solid Brass Construction: Emtek pivot hinge stops begins with raw bars of solid brass which are heated, and pounded into specially made dies—producing a stronger, more substantial product. The difference between lesser metals and heat forged brass is noticeable the minute you hold it in your hands—solid brass is heavier, smoother, and naturally resists corrosion.
Specifications:
-
- Height: 2-3/8"
- Projection: 1-3/4"
- Material: Brass, Rubber
Manufacturer Resources
Product Specs
- Minimum Purchase:
- 5 units
- Subcategory:
- Door Stops
- Collection:
- Brass
- Product Type:
- Door Stops - Hinge Pin
- Product Group:
- Door Trim and Accessories
- Product Subgroup:
- Door Stops, Holders, Silencers & Bumpers
- Commercial/Residential:
- Residential
- Series:
- Hinges Pivot Stop
- Theme:
- American Classic
- Electronic:
- No
- MAP Policy:
- Yes
- Product Model:
- 2241
- Product Style:
- American Classic
- Product Material:
- Brass
- Product Category:
- Door Trim and Accessories
- Product Substrate:
- Brass
Emtek 2241.US19 – Frequently Asked Questions
1) What is the Emtek 2241 brass hinge pivot stop used for?
The Emtek 2241 is a brass pivot stop designed to control door swing and prevent over-rotation. It mounts to the door frame or floor to limit the door's opening angle.
2) Is this pivot stop compatible with all Emtek hinges?
The 2241 works with most Emtek pivot hinge systems. Verify compatibility with your specific hinge model and door configuration before installation.
3) Does this pivot stop work for both left and right hand doors?
Yes, the Emtek 2241 can typically be configured for both left and right hand door applications. Check installation instructions for proper orientation.
4) What brass finish options are available for the 2241?
Emtek offers various brass finishes including polished brass, antique brass, and satin brass. Verify available finishes for this specific model when ordering.
5) What is the load capacity of this pivot stop?
Load capacity varies by installation method and door weight. Consult Emtek specifications and ensure proper mounting substrate for your door application.
6) Are there building code considerations for pivot stops?
Some codes may require specific door opening angles or accessibility compliance. Check local building codes and ADA requirements before installation.
7) What hardware is included with the 2241 pivot stop?
Package contents vary by model. Verify that all necessary mounting screws and components are included or order separately as needed.
8) How do you install the Emtek 2241 pivot stop?
Installation requires proper alignment with the pivot hinge system. Follow Emtek installation templates and ensure secure mounting to prevent loosening under use.
9) Can the stop angle be adjusted after installation?
Adjustment capability depends on the specific design. Some pivot stops offer field-adjustable stop positions while others are fixed once installed.
10) What other Emtek pivot hardware works with this stop?
The 2241 typically coordinates with other Emtek hardware in matching finishes. Consider complete pivot hinge sets for consistent appearance and performance.
11) What are the dimensions of the 2241 pivot stop?
Exact dimensions vary by model configuration. Verify measurements from Emtek specifications to ensure proper fit with your door and frame setup.
How fast can I get the Emtek 2241.US19 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 2241.US19 come with a warranty?
Absolutely. The Emtek 2241.US19 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 2241.US19?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Emtek 2241.US19 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.