Emtek 2254 Floor Door Bumper, 1-3/8" x 1-1/4"

The 2254 is a residential-grade brass floor bumper, and that's the honest scope of it. It's a solid brass stop sized 1-3/8 x 1-1/4 inches, mounted to the floor with the included screw. For a high-traffic commercial opening, an apartment turnover corridor, or a school or hospital door, step up to a heavy duty stop instead: the Ives FS13 or FS17 brass floor dome stops are both heavy duty, and the Ives FS18S/FS18L security floor stop is built for openings that get abused.

Stops only. The 2254 is a bumper that catches the door and protects the wall, with no catch or hold-open mechanism. If you need the door to stay put once it's open, that's a different part: the Orca Hardware 22HD Series goose neck floor stop is listed as a door holder, and the SOSS MDH magnetic door holder and stop, 3-5/16 x 1-3/4 inches, both stops and holds magnetically. The Ives FS40 / FS41 / FS42 / FS43 automatic floor stop and holder is the heavy duty route with adjustable door-to-floor clearance.

The Deltana UFBS138 Square Universal Floor Door Bumper is the nearest match. It is a solid brass floor bumper measuring 1-3/8 inches, the same 1-3/8 inch dimension the Emtek 2254 carries, and the 2254 is likewise a brass floor-mount bumper. Both are the small profile bumper that takes the strike of the door face rather than a holder that keeps the door open.

Step up to a taller profile. The Deltana UFBD3505 Round Universal Floor Bumper is a 3-1/2 inch solid brass decorative floor bumper, roughly two and a half times the 1-3/8 inch height of the Emtek 2254, and the Orca Hardware 22HD Series Goose Neck Floor Stop reaches up on a gooseneck riser and suits doors 1-3/8 or 1-3/4 inch thick. Delaney also builds a Gooseneck Door Stop in the same raised style.

Seven, and they're the standard Emtek finish range, so the bumper can be matched to knobs, levers and hinges already in the house: Oil Rubbed Bronze (US10B), Satin Nickel (US15), Pewter (US15A), Polished Chrome (US26), Polished Brass Lifetime (US3), Unlacquered Brass (US3NL), and French Antique (US7). Unlacquered brass is the one to pick deliberately, since it's left bare to patina rather than clear coated.

The 2254 ships as a complete set with its mounting screw included. Into a wood subfloor or a wood-backed hardwood, that screw is all you need. Going into concrete, tile, or a slab, you'll need to supply an anchor and matching fastener yourself, because the included screw is a wood screw.

Solid brass, substrate and all. Both the material and the substrate on the 2254 are brass, so the finish sits on brass rather than on zinc or steel. That matters on a floor stop more than most hardware, because it gets kicked, mopped and vacuumed against, and a plated pot-metal stop chips through to a different colored base metal.

Three different shapes solving three different problems. The 2254 is a low brass floor bumper at 1-3/8 x 1-1/4 inches, meant to sit close to the floor and catch the door face. A dome stop, like the Delaney Dome Door Stop or the Orca 23LP Series low rise dome floor stop, is the same low-profile idea in a rounded cap. A goose neck stop, like the Delaney Gooseneck Floor Door Stop or the Orca 22HD Series, rises on a stem so it can meet the door higher up, which is what you want when the door has a thick base shoe or the floor covering is deep. Goose neck versions also commonly add a hold-open.

Staying in solid brass, Deltana's universal floor bumper line is the closest cross-brand match: the UFBS138 square universal floor door bumper at 1-3/8 inches is nearly the same footprint as the 2254, the UFB4505 round universal floor bumper is 1-1/2 inches, the UFBP4505 pattern cap version is 1-5/8 inches, and the UFBD3505 decorative round runs 3-1/2 inches for a larger presence. All four are solid brass. The 2254 is the pick when the rest of the door hardware is Emtek and you want the finish codes to line up across knobs, levers and stops.

Emtek builds the 2254 in solid brass in seven finishes including Oil Rubbed Bronze US10B, Satin Nickel US15, Polished Chrome US26, Polished Brass US3, Unlacquered Brass US3NL, Pewter US15A, and French Antique US7. Deltana runs a solid brass floor bumper family in several profiles - the UFB4505 round at 1-1/2 inches, the UFBP4505 round with pattern cap at 1-5/8 inches, and the UFBS138 square at 1-3/8 inches - so a mixed spec can hold one material across differing openings.

If a renewable wear part matters for a fleet of doors, the Ives FS13 heavy-duty brass floor dome stop is specified with a replaceable rubber bumper. The Emtek 2254 ships as a complete set including the screw, so a replacement is ordered as a whole unit and swapped at the same floor anchor point.

A fixed-height bumper will not. The Emtek 2254 is a single 1-3/8 by 1-1/4 inch profile, so it fits one clearance band. The Ives FS40 / FS41 / FS42 / FS43 automatic floor stop and holder is built with adjustable door-to-floor clearance, and the Orca 22HD Series gooseneck covers doors 1-3/8 or 1-3/4 inch thick on a raised arm.

The 2254 is sold as a complete set per stop, screw included, so one order covers one door. Order by model 2254 and the finish code: SPC225410B is Oil Rubbed Bronze, SPC2254US15 is Satin Nickel. For a whole-house job, pick one finish code and repeat it so every stop matches, and match that code to the knobs and levers on the same doors.

The 2254 is styled American Classic, which is Emtek's traditional line, so it sits with paneled doors, older millwork, and classic knob and rosette hardware rather than a flat contemporary look. The French Antique (US7) and Unlacquered Brass (US3NL) finishes lean hardest into that period feel; Polished Chrome (US26) and Satin Nickel (US15) pull it more neutral.