Emtek 4214 Hercules Smooth Sec...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$508.00
$406.40
Emtek Emtek 4214 Hercules Smooth Sectional Single Cylinder Entrance Handleset - Brass Tubular EMTEK-4214

Emtek 4214 Hercules Smooth Sectional Single Cylinder Entrance Handleset - Brass Tubular

(No reviews yet) Write a Review

Model: 4214-US26
From the Brass Collection
$508.00
$406.40
Selected Finish is
Selected Knob or Lever Style for Inside Trim is
Selected Handing is
Selected Backset is
Selected FREE KEYING Options is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$508.00
$406.40
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Emtek 4214 Hercules Smooth Sectional Single Cylinder Entrance Handleset - Brass Tubular

  • Can be ordered with any Brass Knob or Lever for the inside trim
  • Sold as a complete set. Includes Latch and Strike Plate
  • Standard 2-1/8" Door Prep. Door Prep 5-1/2" Center-to-Center
  • Schlage C Keyway
  • Standard latch is for 2-3/8" backset. Specify 2-3/4" backset if required
  • Handing required if Lever used on inside or if Interconnect device is specified

Weiser® (WR5) Keyway

Specify by adding "W" to the beginning of Product Code for Weiser (WR5) Keyway.
No upcharge for cylinder substitution. Can be keyed into existing Weiser system.

 

 

Specifications:

  • Backset: 2-3/8" or 2-3/4"
  • Cross Bore: 2-1/8"
  • Door Thickness: 1-3/8" to 2"
  • Keyway: Schlage C
  • Handing: Required – specify left or right

 

Manufacturer Resources:

Product Specs

Subcategory:
Handlesets
Collection:
Brass
Product Type:
Handlesets
Product Group:
Mechanical Locks
Product Subgroup:
Bored Locksets
Keyed Function:
Single Cylinder
Commercial/Residential:
Residential
Lock Type:
Tubular
Keyed:
Yes
Lock Function:
Entry
Series:
Hercules
Theme:
Contemporary
Electronic:
No
Handle Type:
Handleset
MAP Policy:
Yes
Product Model:
4214
(CTC) Center-to-Center:
5-1/2"
Product Function:
Entry
Product Style:
Contemporary
Product Material:
Brass
Product Category:
Mechanical Locks
Product Substrate:
Brass
Department:
Door Hardware

Emtek 4214-US26 – Frequently Asked Questions

1) Will the Emtek 4214 Hercules handleset fit my door thickness and existing bore prep?
The 4214 Hercules sectional handleset works on doors 1-3/8 inch to 2 inch thick, and uses standard 2-1/8 inch cross bore prep with 5-1/2 inch center-to-center spacing between the deadbolt bore and the knob/lever bore. If your door already has a standard residential 2-1/8 inch bore at 5-1/2 inch CTC, this drops into it. The latch ships for a 2-3/8 inch backset as standard; specify 2-3/4 inch when you order if that is what your door is bored for.
2) Do I have to specify handing on the Emtek 4214 Hercules entrance handleset?
Handing matters here. Emtek requires left or right hand to be called out on the 4214, and it is mandatory when a lever is used for the inside trim or when an interconnect device is specified. Stand outside the door: if the hinges are on your right, it is right hand. Get it wrong with a lever inside and the lever points the wrong way.
3) Can the Emtek 4214 handleset be keyed into my existing Weiser or Schlage keys?
Both. The 4214 Hercules ships standard with a Schlage C keyway, and a Weiser WR5 cylinder is offered as an ordering option at no upcharge, so it can be keyed into an existing Weiser system. Pick the keyway that matches the rest of the building and the property stays on one key. Keyed alike or keyed different is selected at order, and there is a field to key to a specific code if you are matching an existing system.
4) What comes in the box with the Emtek 4214 Hercules handleset, and do I need to order the interior knob separately?
The 4214 is sold as a complete set with the latch and strike plate included, so you are not chasing a separate latch. The interior trim is not preselected: you choose a knob or lever style when you order, from the full Emtek brass line, and that choice is required. If you pick a lever, you also have to call out handing.
5) I have a door bored for a 2-3/4 inch backset. Will the Emtek 4214 work, or do I need to re-drill?
No re-drill needed. The 4214 Hercules is offered with either a 2-3/8 inch or a 2-3/4 inch backset latch, so it covers both of the two backsets used on residential doors. The standard latch shipped is 2-3/8 inch, so 2-3/4 inch has to be called out on the order. Measure from the door edge to the center of the bore before you commit.
6) I need a double cylinder entry handleset, not single cylinder - what is the alternative to the Emtek 4214?
The Emtek 4214 Hercules is a single cylinder entry set, keyed outside only. For a keyed-both-sides opening, such as a door with glass beside the lock, the Baldwin Estates 6542 Tremont Double Cylinder Entry Mortise Trim is an entrance-function double cylinder trim for a 1-3/4 inch door. Its single cylinder counterpart is the Baldwin Estates 6542 Tremont Single Cylinder Entry Mortise Trim, same 1-3/4 inch door thickness, if the rest of the run stays single cylinder.
7) What is a comparable single cylinder entry handleset to the Emtek 4214 Hercules for a 1-3/8 inch door?
The Emtek 4214 Hercules is a tubular single cylinder entry handleset that covers a 1-3/8 inch to 2 inch door thickness. Two handlesets carry that same range: the Weslock 2810 Hillcrest Single Cylinder Handleset with Hudson Knob, a single cylinder set in the Premiere Essentials line rated 1-3/8 inch to 2 inch, and the Deltana 810871 Montego Handleset, also 1-3/8 inch to 2 inch. If the door is thicker, the Weslock 1411 Traditionale Colonial with Eleganti Knob is a single cylinder set built for 1-3/4 inch to 2-1/4 inch doors.
8) Which handleset gives me keypad or smartphone entry instead of a keyed Emtek 4214?
The Emtek 4214 Hercules is a mechanical, non-electronic handleset keyed to a Schlage C cylinder. For electronic access on the same style of opening, the Kwikset 815SCEHFL-CP913CNT San Clemente Handleset pairs a Halifax lever interior with a Contemporary SmartCode keypad electronic deadbolt for a 1-3/4 inch door, and the Yale Real Living BYRD226NRRX Assure Lock is a standalone touchscreen deadbolt with a Ridgefield handleset for 1-3/4 inch to 2-1/4 inch doors. If the site wants remote control, the Yale BYRD226CBARX adds Wi-Fi and Bluetooth on the same 1-3/4 inch to 2-1/4 inch range.
9) What entry handleset should I use on a 1-3/4 inch commercial door instead of the Emtek 4214?
The Emtek 4214 Hercules is built for residential openings and covers 1-3/8 inch to 2 inch doors. For a 1-3/4 inch door where a graded set is called for, the Schlage Residential F60 Addison Keyed Entry Handleset with Accent Lever is a Grade 2 entrance handleset in the F Series covering 1-3/8 inch to 1-3/4 inch. The Master Lock HDLBA0615/4D is also a Grade 2 single cylinder deadbolt handleset in the HDLB Series. Both state a grade the 4214 does not compete on directly, since it is a residential brass tubular set.
10) Is the Emtek 4214 Hercules handleset a tubular set or a mortise set?
Tubular. The 4214 Hercules uses standard 2-1/8 inch bored prep, which is what a residential door is already drilled for, so it is far simpler to install than a mortise set that needs a pocket routed into the door edge. If your door is already prepped for a mortise lock body, this is not a swap for it, and you would be looking at mortise trim instead, such as the Baldwin Estates 6542 Tremont single cylinder entry mortise trim.
11) What finishes does the Emtek 4214 Hercules handleset come in, and can I match the rest of my doors?
Eight finishes across the 4214 Hercules: Oil Rubbed Bronze (US10B), Polished Nickel Lifetime (US14), Satin Nickel (US15), Flat Black (US19), Polished Chrome (US26), Unlacquered Brass (US3NL), Satin Brass (US4), and French Antique (US7). Every one of those is available with either the Schlage or the Weiser cylinder, so the keyway decision does not narrow your finish choice. Because the interior knob or lever is ordered from the Emtek brass line in the same finish family, an entry door can be matched to the passage and privacy sets down the hall.
12) What is the difference between the Emtek 4214 Hercules handleset and the Weslock 2815 Hillcrest?
Function. The Emtek 4214 Hercules is a keyed entry handleset with a single cylinder. The Weslock 2815 Hillcrest with New Heaven Lever is a dummy handleset in the Premiere Essentials Series, 1-3/8 inch to 2 inch door thickness, meaning it has no latch and no cylinder - it is surface-mounted trim for an inactive leaf. The Weslock 6695 Belmont with Impresa Knob is the same story, a dummy handleset in the Elegance Series for 1-3/8 inch to 2 inch doors. Use those on the inactive half of a pair and the keyed set on the active leaf.
13) I only need the exterior handle - is the Kwikset 687 Amador the same thing as an Emtek 4214?
Not the same scope. The Emtek 4214 Hercules is sold as a complete set with latch and strike plate, and the inside knob or lever is chosen as part of the order. The Kwikset 687AMD SMC Amador is a single cylinder keyed entry handleset supplied exterior only, Grade 3, for a 1-3/4 inch door, with an SC1 keyway and SmartKey; the Kwikset 687AMD-S and the 687BW Belleview are the same exterior-only arrangement at Grade 3 on a 1-3/4 inch door. Those need interior trim sourced separately, where the 4214 does not.
14) What handleset do I use on an opening that does not need to be keyed?
The Emtek 4214 Hercules is a keyed entry set with a single cylinder. Where the opening does not take a key - an interior passage or a secondary door - the Schlage Residential JE285 Barcelona Style Handleset with Seville Lever is a non-keyed entrance-style Grade 2 set in the J Series for 1-3/8 inch to 1-3/4 inch doors. The Yale BYRD256 CBARX pairs a Ridgefield passage handleset with a key-free touchscreen deadbolt on a 1-3/4 inch to 2-1/4 inch door if the security stays on the deadbolt instead of the handle.
15) Is a Schlage JI18/19 interconnected lock an alternative to the Emtek 4214 Hercules?
They solve different openings. The Emtek 4214 Hercules is an entry-function single cylinder handleset. The Schlage Residential JI18/19 with Torino Lever is a passage-function interconnected lock with a keyed deadbolt, Grade 2, JI Series, for 1-3/8 inch to 1-3/4 inch doors - the latch is passage and the key work sits in the deadbolt above it. That layout is common on multi-family unit entries where the lever always turns free from inside.
16) How many interior knob and lever choices does the Emtek 4214 Hercules handleset offer?
Close to ninety interior trim options on the 4214, spanning contemporary levers (Stuttgart, Helios, Athena, Hermes, Poseidon), traditional levers (Cortina, Milano, Turino, Rope, Ribbon and Reed), knobs (Orb, Round, Egg, Octagon, Square), crystal knobs (Bristol, Windsor, Georgetown, Old Town), and the L-Square, T-Bar, and R-Bar bar-style trims in faceted, hammered, knurled, Tribeca, straight knurled, and white marble treatments. The trim choice is required at order. Choose a lever and you must also call handing.
17) The Emtek 4214 requires handing - which comparable entry handlesets avoid that decision?
Handing is required on the Emtek 4214 Hercules whenever a lever is used inside or an interconnect device is specified, and left or right must be stated on the order. Among solid brass alternatives that are ordered as a knob set, the Deltana 803871B Hanover, the Deltana 815871 St. Ann and the Deltana 825871 Kingston are all entry-function solid brass handlesets in their own series. The Baldwin Wesley Handleset x Alcott Knob and the Wesley x Carnaby Knob are entrance-function sets supplied with a knob interior.
18) Is there a simpler single cylinder handleset than the Emtek 4214 for a satin nickel door?
The Emtek 4214 Hercules is offered in Satin Nickel (US15) among its finishes and is ordered with a chosen inside knob or lever, handing, backset and keying. The Pamex FS7P31 Lexington Single Cylinder Handleset comes in a satin nickel finish as an entry-function set for 1-3/8 inch to 1-3/4 inch doors, with the finish and trim already fixed rather than configured.
How fast can I get the Emtek 4214-US26 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 4214-US26 come with a warranty?
Absolutely. The Emtek 4214-US26 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 4214-US26?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Emtek 4214-US26 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!