Emtek 450112 Remington Entrance Handleset - Sandcast Bronze Tubular - Dummy

It's a dummy set, so there's no latch and no key. The Remington sandcast bronze handleset in the 450112 configuration is fixed trim you pull on: nothing retracts, nothing bolts. Use it on an inactive leaf of a double door, a closet or pantry door, or the fixed half of a French pair. If you need the door to latch or lock, this is the wrong function and you want an entry or single cylinder handleset instead.

No door prep at all. It's surface mount, so it screws to the face of the door with no cross bore and no latch bore. That makes it a straightforward swap onto a slab that has never been drilled, and it's why it works on doors from 1-3/8 inch up to 1-3/4 inch without a thickness-specific latch.

Handing is required on the order either way, right hand or left hand, and it genuinely matters if you pick a lever for the inside trim, since a lever has to point toward the latch edge. With a knob on the inside, handing is less visually critical but is still part of how the set is built. Stand outside the door: if the hinges are on your right it's right hand, on your left it's left hand.

Three decisions. Finish, in Flat Black Bronze, Medium Bronze, or Tumbled White Bronze. Inside trim, chosen from the full sandcast bronze range: ten levers (Aurora, Bryce, Cimarron, Cody, Durango, Lariat, Mariposa, Montrose, Teton, Yuma) and fifteen knobs including Butte, Egg, Round, Winchester, Bristol, Hampton, Lowell, Windsor, Astoria, Diamond, Georgetown, Modern Disc, Modern Square, Old Town and Providence. And handing. There's also an optional split finish field if you want the inside different from the outside. It ships as a complete set, so the interior trim comes with it.

The Weslock 6695 Belmont is a dummy handleset that ships with an Impresa knob as the inside trim, in the Elegance Series. The Emtek 450112 Remington is also a dummy function handleset and takes its inside trim as a separate choice, so a knob such as the Butte, Egg, Round, Winchester or Windsor can be specified in place of a lever. Both are non-keyed dummy sets, so neither one latches or locks - they are pull trim only. The Weslock 6695 fits doors 1-3/8 inch to 2 inch, and the Emtek 450112 fits 1-3/8 inch to 1-3/4 inch.

The Emtek 450112 Remington is a non-keyed dummy handleset, so it will not secure an opening. For a keyed exterior door, the Schlage F60 Addison with Accent lever is a single cylinder keyed entry handleset, Grade 2, for doors 1-3/8 inch to 1-3/4 inch. The Pamex FS7P31 Lexington is another single cylinder handleset in an entry function covering the same 1-3/8 inch to 1-3/4 inch door range. The Weslock 2810 Hillcrest with Hudson knob is a single cylinder handleset for doors 1-3/8 inch to 2 inch.

The Emtek 450112 Remington covers 1-3/8 inch to 1-3/4 inch doors. For a 2 inch door, the Weslock 6695 Belmont dummy handleset and the Weslock 2815 Hillcrest dummy handleset both list 1-3/8 inch to 2 inch, as does the Deltana 810871 Montego handleset. If the door is thicker still, the Weslock 1411 Traditionale Colonial with Eleganti knob covers 1-3/4 inch to 2-1/4 inch as a single cylinder set.

No - the two do different jobs. The Schlage JE285 Barcelona with Seville lever is a non-keyed entry function handleset in the J Series, Grade 2, meaning it latches the door without a key cylinder. The Emtek 450112 Remington is a dummy: the trim is fixed and there is no latch at all, which is why it is used on an inactive door leaf or a French door slab. If the leaf needs to stay shut on its own, the JE285 is the correct choice; if a second set of matching trim is wanted on a leaf held by a flush bolt, the dummy is.

Tubular. That matters because a mortise handleset needs a deep pocket routed into the door edge, and this one doesn't; it's surface mounted with no prep. If your door already carries a mortise lock body and you're replacing trim only, this isn't a drop-in for it, and you'd want mortise entry trim such as the Baldwin Estates 6542 Tremont instead.

5-1/2 inches center to center between the upper and lower escutcheon fixings. Since it's surface mounted with no bore required, it lands on the door face rather than into an existing prep, so measure your current plate's mounting centers against that 5-1/2 inches before you assume old fastener holes will be hidden.

It's built from the Sandcast Bronze collection in the Remington style, and the inside knob or lever comes from the same sandcast bronze family, so a dummy on the inactive leaf can be specified in the identical trim and finish as a working entry set beside it. Pick the same finish, Flat Black Bronze, Medium Bronze, or Tumbled White Bronze, and the same lever or knob style on both, and the pair reads as one assembly.

Two other dummy handlesets worth knowing: the Weslock 6695 Belmont dummy handleset with Impresa knob, listed for 1-3/8 inch to 2 inch doors, and the Weslock 2815 Hillcrest dummy handleset with New Heaven lever, same 1-3/8 inch to 2 inch range. Both cover thicker doors than the Emtek Remington's 1-3/4 inch ceiling. The Emtek is the one to pick if you want sandcast bronze and a choice of twenty-five interior knob and lever styles to match adjacent openings.

The Emtek 450112 Remington is a residential dummy handleset. Where a graded product is required, the Master Lock HDLBA0615/4D single cylinder deadbolt handleset in the HDLB Series is Grade 2 entrance function, and the Schlage F60 Addison with Accent lever is Grade 2 entrance for 1-3/8 inch to 1-3/4 inch doors. The Kwikset 687AMD Amador and 687BW Belleview single cylinder handlesets are Grade 3 entrance function for 1-3/4 inch doors.

They are built on different lock platforms. The Baldwin Estates 6542 Tremont is entry function mortise trim for 1-3/4 inch doors, offered in single cylinder and double cylinder versions, and it dresses a mortise lock body pocketed into the door edge. The Emtek 450112 Remington is a tubular dummy handleset with no lock body behind it - it is surface mounted with no door prep required. A door already prepped for a mortise pocket takes the Baldwin trim; an unprepped slab that only needs matching pull trim takes the Emtek.

The Emtek 450112 Remington is a non-electronic dummy handleset. For an electronic front door, the Kwikset 815SCEHFL-CP913CNT San Clemente pairs a handleset and Halifax lever trim with a contemporary SmartCode keypad deadbolt on a 1-3/4 inch door, in the Signature Series. The Yale Real Living BYRD226CBARX combines a Wi-Fi and Bluetooth touchscreen deadbolt with the Ridgefield handleset for 1-3/4 inch to 2-1/4 inch doors, and the BYRD226NRRX is the standalone touchscreen version of the same handleset pairing.

The Deltana line offers several solid brass entry handlesets: the 803871B Hanover, the 815871 St. Ann and the 825871 Kingston, all entry function. The Emtek 450112 Remington is brass with a bronze substrate in the Sandcast Bronze collection and is a dummy rather than an entry set, so the Deltana sets latch the door while the Emtek provides fixed trim. Deltana also lists the 810871 Montego handleset for 1-3/8 inch to 2 inch doors.

The sandcast bronze parts are bronze substrate, cast rather than stamped, which is what gives the Remington its heavy edges and the surface variation you see in Medium Bronze and Tumbled White Bronze. Flat Black Bronze is the darkest of the three. The set is built as brass and bronze hardware, not a plated zinc casting.

Yes. The Baldwin Wesley handleset comes paired with the Alcott knob as 180WYHXATK or with the Carnaby knob as 180WYHXCYK, both entrance function, so the interior trim is set by the part number. The Emtek 450112 Remington is ordered the other way: the inside knob or lever is selected separately from the Sandcast Bronze range and the set ships complete.

No. The Yale Real Living BYRD256 CBARX pairs a key free touchscreen Wi-Fi deadbolt with a Ridgefield passage handleset and trim for 1-3/4 inch to 2-1/4 inch doors, and the BYRD256CBARX Assure Lock 2 covers 1-3/8 inch to 2-1/4 inch. Both bore the door for a deadbolt and a latch and need power at the lock. The Emtek 450112 Remington is surface mounted with no door prep required and no electronics, so swapping one for the other means new prep in the door.

The Kwikset 687AMD Amador and 687BW Belleview single cylinder keyed entry handlesets are supplied exterior only, Grade 3, for 1-3/4 inch doors; the 687AMD is offered with SmartKey as KWI-687AMD-S and with the SC1 keyway SmartKey as KWI-687AMD-SMC. The Emtek 450112 Remington is sold as a complete set with the inside knob or lever included, so it is specified when both faces of the door are being changed.