Emtek 450411 Rectangular Sectional Entrance Handleset - Sandcast Bronze Tubular - Dummy

It is a dummy function handleset, so there is no latch and no key. The handle and inside knob or lever are fixed trim that mounts to the face of the door. Use it on an inactive leaf of a double door, or on a door that is held closed by a separate flush bolt, ball catch, or deadbolt. If you need the door to latch, you need an entry or single cylinder version instead.

1-3/8 inch to 1-3/4 inch doors, which covers standard residential exterior slabs as well as thinner older doors. Because it is a dummy, it mounts to the surface with no door prep required, so you are not cutting a bore or a latch mortise for it. There is a door thickness field on the order if your slab is at the thicker end of that range.

Yes, handing is a required choice, right hand or left hand. It matters whenever a lever is used on the inside, since the lever has to throw toward the latch side. Knobs are symmetrical but the order still asks for the hand so the set ships oriented correctly.

Any Sandcast Bronze knob or lever from the collection. The lever options are Aurora, Bryce, Cimarron, Cody, Durango, Lariat, Mariposa, Montrose, Teton and Yuma. Knobs run Butte, Egg, Round, Winchester, Bristol, Hampton, Lowell, Windsor, Astoria, Diamond, Georgetown, Modern Disc, Modern Square, Old Town and Providence. The inside trim is a required selection and the set ships complete.

The 450411 is the dummy half. Order it in the same Sandcast Bronze finish and the same inside knob or lever style as the active leaf's keyed handleset, and the two leaves read as a matched pair. The dummy has no cylinder and no latch, so the inactive leaf is held by flush bolts.

No. The 450411 is rated to 1-3/4 inches maximum. For a 2 inch slab look at the Weslock 2815 Hillcrest dummy handleset, listed for 1-3/8 to 2 inch doors. If the door is thicker still, the Weslock 1411 Traditionale is listed at 1-3/4 to 2-1/4 inches, though that one is a single cylinder keyed set rather than a dummy.

The Emtek 450411 Rectangular sectional handleset is a dummy function handleset in the Sandcast Bronze collection, surface mounted with no door prep required. Two other dummy handlesets are the Weslock 2815 Hillcrest Dummy Handleset with New Heaven Lever in the Premiere Essentials Series and the Weslock 6695 Belmont Dummy Handleset with Impresa Knob in the Elegance Series, both listing a 1-3/8 inch to 2 inch door thickness range. The Emtek covers 1-3/8 inch to 1-3/4 inch doors.

The Emtek 450411 is non-keyed and dummy function, so it has no latch or cylinder. For a keyed opening, the Schlage Residential F60 Addison single cylinder keyed entry handleset with Accent lever is Grade 2 and fits 1-3/8 inch to 1-3/4 inch doors, the same door range as the Emtek. Other keyed options include the Weslock 2810 Hillcrest single cylinder handleset with Hudson knob for 1-3/8 inch to 2 inch doors and the Pamex FS7P31 Lexington single cylinder handleset in satin nickel, also 1-3/8 inch to 1-3/4 inch.

The Emtek 450411 is a dummy, meaning the handle does not operate a latch at all. The Schlage Residential JE285 Barcelona style handleset with Seville lever is a non-keyed entry function, Grade 2, for 1-3/8 inch to 1-3/4 inch doors, so the lever actually retracts a latch without a key. Pick the JE285 for an operating door and the 450411 for a fixed or inactive leaf.

5-1/2 inches center to center. That is the figure to check against the existing screw holes if you are swapping out another sectional handleset, and against the stile width on a door with glass or a narrow rail.

Three sandcast bronze finishes: Flat Black Bronze (FB), Medium Bronze (MB) and Tumbled White Bronze (TWB). A split finish option is available if you want the exterior handle in one finish and the interior trim in another, which is common when the outside has to match other exterior hardware and the inside has to match the rest of the house.

Tubular. The 450411 is a tubular sectional handleset, meaning the grip section and the inside trim are separate pieces rather than one mortise case escutcheon. As a dummy it mounts on the surface with no door prep. If your door is already prepped for a mortise lock body, a tubular sectional set will not fill that pocket.

The Emtek 450411 is a non-electronic, non-keyed dummy tubular handleset in sandcast bronze. The Yale Real Living BYRD226NRRX pairs a Ridgefield handleset with a standalone touchscreen deadbolt, and the BYRD226CBARX adds Wi-Fi and Bluetooth; both fit 1-3/4 inch to 2-1/4 inch doors. Those are keyless electronic entry sets, so choose them when the opening needs code access rather than a pull-only trim.

No. The Emtek 450411 is a tubular, surface mounted dummy handleset needing no door prep. The Baldwin Estates 6542 Tremont is entry mortise trim for a 1-3/4 inch door and is offered in single cylinder and double cylinder versions, which requires a mortise pocket in the door. They are not interchangeable preps.

The Emtek 450411 is a dummy handleset that surface mounts with no door prep, so backset is not a factor. If you need an adjustable backset for an existing bore, Sure-Loc offers the Alta tubular handleset AT507, the Aspen single cylinder keyed entry AN507, the Madison keyed entry MA507, and the Coral CR507, all with adjustable backset.

The Emtek 450411 is classified for residential use. If a graded product is required, the Master Lock HDLB Series HDLBA0615/4D single cylinder deadbolt handleset is Grade 2, the Schlage Residential F60 Addison is Grade 2, and the Kwikset 687AMD Amador and 687BW Belleview single cylinder handlesets are Grade 3.

No. The Emtek 450411 is non-electronic and dummy function. A keypad handleset specification is met by products such as the Kwikset 815SCEHFL-CP913CNT San Clemente handleset with Halifax lever and a contemporary SmartCode keypad electronic deadbolt, Signature Series, for 1-3/4 inch doors, or the Yale BYRD256 CBARX Assure key free touchscreen deadbolt with Ridgefield passage handleset for 1-3/4 inch to 2-1/4 inch doors.

It is sandcast bronze, both substrate and material, from Emtek's Sandcast Bronze collection. Sandcast parts carry the texture and slight variation of the casting process, so no two pieces are identical, which is the look intended for rustic and timber-frame entries. It is a residential product.

The Emtek 450411 is a brass handleset in the Sandcast Bronze collection with a rectangular sectional plate, offered in Flat Black Bronze, Medium Bronze and Tumbled White Bronze. For a solid brass entry handleset in a different styling, Deltana offers the 803871B Hanover, the 815871 St. Ann and the 825871 Kingston, all entry function solid brass handlesets.