Emtek 8035 Designer Brass Leverset with Wilshire 7" Non-Keyed Sideplate Lockset, Dummy (Pair)

No door prep is needed. The Emtek 8035 Wilshire sideplate dummy set is surface mounted, so the 7 inch sideplate and lever screw to the face of the door rather than into a bored cross-bore and latch hole. That makes it a common choice for closet doors, French doors, and fixed inactive leaves where you do not want to cut the door.

Dummy means there is no latch and no working mechanism. The Emtek 8035 Wilshire set is a non-keyed pull only, so the lever does not retract a bolt and the door is held shut by whatever else is on it, such as a ball catch, roller catch, or magnetic catch. Order it where you need a handle to match the rest of the doors but no latching at all.

It ships as a pair, one dummy leverset for each side of the door or one for each leaf of a double door. The set is complete and includes the levers, so you do not order the lever separately.

Yes, handing is required. You pick left hand (LH) or right hand (RH) so the lever points the correct way when mounted. On a dummy pair used on a single door, the handing determines the lever direction on each face, so confirm which way the door swings and which side you are looking at before ordering.

The Omnia D12036PD is the nearest match. It is a solid brass dummy deadbolt lever lockset with plates, spaced 5-1/2 inches center to center, and it carries a double dummy function - the same non-latching, pull-only role the Emtek 8035 Wilshire set fills as a dummy pair. The Emtek set uses a 7 inch non-keyed sideplate in brass; the Omnia is specified at 5-1/2 inch center to center, so the plate proportions on the door face differ even though the function matches.

Seven finishes: French Antique (US7), Oil Rubbed Bronze (US10B), Pewter (US15A), Polished Brass Lifetime (US3), Polished Chrome (US26), Satin Nickel (US15), and Unlacquered Brass (US3NL). Unlacquered brass will patina over time, so if you are matching existing hardware on other openings in a building, the lifetime polished brass is the one that stays put.

Yes, and it does not change the price. Cataloged lever choices are Coventry (CV), Elan (EN), Ribbon and Reed (RBL), Rope (RL), Rustic (R), Santa Fe (SF), and Wembley (WM). If you want a brass lever or knob outside that list, there is an option to specify it in the comments field with your order.

It is a residential product. The 8035 Wilshire sideplate set is solid brass with a tubular-style trim design and is cataloged for residential use, so for high-traffic commercial openings in an office, school, or hospital you want a graded commercial leverset instead.

Treat it as a functional match, not a hole-for-hole one. Both are brass dummy lever sets with plates, but the Emtek 8035 Wilshire sideplate is a 7 inch plate and mounts to the surface with no door prep required, while the Omnia D12036PD is specified at 5-1/2 inch center to center. Existing screw locations and the footprint left on the door by the outgoing set will not necessarily line up, so plan on verifying the plate outline against the door before swapping brands.

Purely mechanical trim, and with dummy function there is nothing to wire, power, or program. It is brass hardware that screws to the door face.

The Emtek 8035 Wilshire set is built around lever style choice: Coventry, Elan, Ribbon and Reed, Rope, Rustic, Santa Fe and Wembley levers all mount to the same 7 inch American Designer sideplate, in finishes from Unlacquered Brass and Polished Brass to Oil Rubbed Bronze, Pewter, French Antique, Satin Nickel and Polished Chrome. The Omnia D12036PD is the comparable solid brass dummy lever set with plates at 5-1/2 inch center to center. Both are dummy function; the decision is plate proportion and how closely you need the lever profile to match the rest of the house.