Emtek 8469 Square Deadbolt - Modern Brass - Single Cylinder
- Schlage® C Keyway
- Standard Door Prep and Installation
- Solid Brass Cylinder, Housing, Collar, Thumbturn, and Rosette
- Hardened Steel Bolt
- Heavy Gauge Steel Understrike
- Brass Trim Strike Shipped with Every Deadbolt
- Handing Not Required
- Standard latch is for 2-3/8” backset. Specify 2-3/4”backset if required.
- Standard door thickness of 1-3/4". Specify if thicker. Includes Extension Collar for Thin Doors. EMPowered™ fits door thickness up to 2-1/4".
Weiser® (WR5) Keyway
- Specify by adding “W” to the beginning of product code.
- No upcharge for cylinder substitution. Can be keyed into existing Weiser® system
Manufacturer Resources
Product Specs
- Subcategory:
- Deadbolts
- Collection:
- Brass
- Product Type:
- Deadbolts
- Product Group:
- Mechanical Locks
- Product Subgroup:
- Deadbolts
- Commercial/Residential:
- Residential
- Lock Function:
- Deadbolt
- Keyed:
- Yes
- Lock Type:
- Tubular
- Series:
- Square
- Theme:
- Contemporary
- Electronic:
- No
- Keyed Function:
- Single Cylinder
- Handle Type:
- Deadbolt
- Product Attribute:
- Deadbolts
- MAP Policy:
- Yes
- Product Model:
- 8469
- Product Function:
- Cylinder x Thumbturn
- Product Shape:
- Square
- Product Style:
- Contemporary
- Product Material:
- Brass
- Product Category:
- Mechanical Locks
- Product Substrate:
- Brass
Emtek 8469-US19 – Frequently Asked Questions
1) What door thickness does the Emtek 8469 square deadbolt accommodate?
Standard door thickness is 1-3/8" to 1-3/4". Check manufacturer specifications for exact compatibility with your door thickness before installation.
2) Does this deadbolt work with multi-point lock systems?
This is a standard single-point deadbolt. It may work with some multi-point systems but verify compatibility with your specific multi-point lock manufacturer.
3) How do I determine the correct handing for installation?
Stand on the outside of the door. If hinges are on your right, it's right-handed. If hinges are on your left, it's left-handed. Most deadbolts are reversible during installation.
4) What is the backset measurement for this deadbolt?
Standard backset is typically 2-3/8" or 2-3/4". Measure from the door edge to the center of your existing bore hole or check the manufacturer template for exact specifications.
5) What security grade does this deadbolt meet?
Verify the specific ANSI/BHMA grade rating with manufacturer documentation. Professional-grade deadbolts typically meet Grade 1 or Grade 2 standards for residential use.
6) Does this meet fire door code requirements?
Check manufacturer specifications for fire door rating compliance. Fire doors require specific listed hardware that meets UL standards and local building codes.
7) What tools are needed for installation?
Typically requires Phillips head screwdriver, drill with bits, hole saw or spade bits, chisel, measuring tape, and pencil. Follow manufacturer installation template for specific requirements.
8) Can I install this in an existing door prep?
Standard deadbolt prep uses 2-1/8" bore hole and 1" latch hole. If existing prep matches these dimensions and backset, installation should work with proper strike plate alignment.
9) How do I maintain the Modern Brass finish?
Clean with mild soap and water. Avoid abrasive cleaners or harsh chemicals. Dry immediately after cleaning. Apply appropriate metal polish if recommended by manufacturer.
10) What other Emtek deadbolt styles are available?
Browse our Emtek collection for round, rectangular, and other geometric deadbolt designs in various finishes to match your hardware needs.
11) Will this work in high-moisture environments?
Check manufacturer specifications for moisture resistance ratings. Consider door preparation, weatherproofing, and proper drainage to prevent moisture damage to hardware and door.
12) What is the cylinder length specification?
Single cylinder deadbolts typically accommodate standard door thickness. For non-standard doors, measure door thickness and verify cylinder length compatibility with manufacturer specifications.
How fast can I get the Emtek 8469-US19 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 8469-US19 come with a warranty?
Absolutely. The Emtek 8469-US19 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 8469-US19?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Emtek 8469-US19 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.