Emtek 8559 Knoxville Single Sided Deadbolt - Brass
- For interior installation and appearance
- Operated by thumbturn from inside only
- No Cylinder or Collar
- Standard door thickness of 1-3/4". Specify if thicker.
Specifications:
- Backset: 2-3/8" or 2-3/4"
- Cross Bore: 2-1/8"
- Edge Bore: 1"
- Door Thickness: 1-3/8" to 2"
- Keyway: Schlage C
- Material: Brass
Manufacturer Resources
Product Specs
- Subcategory:
- Single Sided Deadbolts
- Collection:
- Brass
- Product Type:
- Deadbolts
- Product Group:
- Mechanical Locks
- Product Subgroup:
- Deadbolts
- Commercial/Residential:
- Residential
- Keyed Function:
- Non-Keyed
- Keyed:
- No
- Lock Function:
- Single Sided
- Lock Type:
- Tubular
- Series:
- Knoxville
- Theme:
- American Designer
- Electronic:
- No
- Handle Type:
- Deadbolt
- Product Attribute:
- Deadbolts
- MAP Policy:
- Yes
- Product Model:
- 8559
- Product Function:
- Cylinder x Thumbturn
- Product Style:
- American Designer
- Product Material:
- Brass
- Product Category:
- Mechanical Locks
- Product Substrate:
- Brass
- Department:
- Door Hardware
Emtek 8559-US26 – Frequently Asked Questions
1) Is the Emtek 8559 Knoxville deadbolt keyed on the outside, or is it thumbturn only?
Thumbturn only. The 8559 Knoxville is a single sided deadbolt operated from the inside by the thumbturn, and it ships with no cylinder and no collar, so there is nothing to key and no outside trim. Use it where you never need to unlock from the other side, like a closet, a storage room, or the inactive leaf of a pair. If you need outside key access, choose a cylinder x thumbturn deadbolt instead.
2) What door thickness will the Emtek 8559 single sided deadbolt fit?
It covers 1-3/8 inch through 2 inch doors. The standard build is set up for 1-3/4 inch, which is the usual commercial and exterior thickness, so anything thicker has to be called out on the order (there is a door thickness field for exactly that). A 1-3/8 inch interior door, common on older interior openings, is within range.
3) Will the Emtek 8559 drop into the holes left by an old deadbolt?
It uses standard tubular deadbolt prep: 2-1/8 inch cross bore through the face and a 1 inch edge bore for the latch. If the door already has that prep at a 2-3/8 or 2-3/4 inch backset, the 8559 goes in without new boring. On the outside face you will see the old cylinder hole exposed, since this deadbolt has no exterior trim or collar to cover it.
4) Is the Emtek 8559 Knoxville deadbolt suitable for a commercial or school door?
No. It is a residential deadbolt in solid brass, single sided, non-keyed, with no stated ANSI grade. For a commercial opening look at a graded unit instead: the Cal-Royal CRB800 is a Grade 1 heavy duty single cylinder deadbolt, and the Corbin Russwin DL3011 is a Grade 1 cylindrical deadlock listed for 1-3/4 to 2-1/4 inch doors. For a classroom-function deadbolt the Falcon D111 is Grade 1 heavy duty.
5) What is the closest equivalent to the Emtek 8559 Knoxville single sided deadbolt if I need a one-sided, non-keyed deadbolt from another brand?
The Emtek 8559 Knoxville is a single sided, non-keyed deadbolt operated by a thumbturn from inside only, with no cylinder or collar. Two peers cover the same one-sided idea: the Callan Model 205S is a one-sided half-bore deadbolt, and the Arrow E60 is a Grade 2 exit deadlock with a blank plate on the outside and a thumbturn inside, rated for 1-3/8 inch to 1-3/4 inch doors. The Callan 205S uses a half bore rather than the 8559's full 2-1/8 inch cross bore, and the Arrow E60 fills the outside face with a blank plate instead of leaving it plain.
6) I need a keyed deadbolt on that door, not a thumbturn-only one. What should I order instead of the Emtek 8559?
The Emtek 8559 Knoxville is non-keyed and turns from the inside only, so it gives no outside key access. For a keyed opening in a Schlage C keyway, which is the 8559's keyway, the Hager 3215 is a single cylinder deadbolt with a 1 inch throw for 1-3/8 inch to 1-3/4 inch doors, and the Hager 3115 is a cylinder x thumbturn deadbolt with a Schlage C keyway over the same thickness range. Both are fire rated. If you want the same look in a residential design line, Bravura's 310B Elite is a Grade 2 traditional round cylinder x thumbturn deadbolt.
7) Can I use the Emtek 8559 Knoxville deadbolt on a commercial opening that needs an ANSI Grade 1 deadbolt?
The Emtek 8559 Knoxville is a residential tubular deadbolt. Where a specification calls for a Grade 1 deadbolt, peers that carry that rating include the Accentra D111 single cylinder deadbolt with a 2-3/8 inch backset for 1-3/8 inch to 1-3/4 inch doors, the Falcon D111 Grade 1 classroom deadbolt with adjustable backset, the Dexter DB1000 single cylinder deadbolt for 1-3/8 inch to 1-7/8 inch doors, and the Design Hardware D1 Series double cylinder deadbolt for 1-3/4 inch doors. The Design Hardware D1 is also listed extra heavy duty.
8) The door is thicker than 1-3/4 inches. Is the Emtek 8559 Knoxville still the right deadbolt?
The Emtek 8559 Knoxville covers 1-3/8 inch to 2 inch doors as standard and is built around a 1-3/4 inch door, with thicker doors called out at time of order. Other deadbolts in the same thickness territory are the Deltana 7312KA2 double cylinder Grade 3 deadbolt, also 1-3/8 inch to 2 inch, and for heavier stock the Corbin Russwin DL3011 Grade 1 cylindrical deadlock, which covers 1-3/4 inch to 2-1/4 inch. The DL3011 is a cylinder by blank deadlock rather than a thumbturn unit.
9) I need an interchangeable core deadbolt for a master keyed building. Which options replace the Emtek 8559 Knoxville?
The Emtek 8559 Knoxville is non-keyed and takes no core. For small format interchangeable core work, the Arrow E61 26D IC is a Grade 2 single cylinder deadlock with SFIC prep supplied less core for 1-3/8 inch to 1-3/4 inch doors, the Deltana CL200LAIC is a Grade 2 single deadbolt with an interchangeable core and a 2-3/4 inch backset, and the Delaney LM Series is a Grade 1 single cylinder less core deadbolt in dull chrome US26D.
10) We need a fire rated deadbolt on a rated opening. What goes in place of the Emtek 8559 Knoxville?
The Emtek 8559 Knoxville is a residential single sided deadbolt. Where the opening is rated, the Hager 3115, 3118, 3214 and 3215 deadbolts are all listed fire rated for 1-3/8 inch to 1-3/4 inch doors, and the Cal-Royal CRB800 is a Grade 1 heavy duty single cylinder deadbolt with a UL 3-hour fire rated latch. The Hager 3118 is a Grade 1 classroom deadbolt with a Schlage C keyway and a 6-pin cylinder, the same keyway family the 8559 is built around.
11) What finishes does the Emtek 8559 Knoxville deadbolt come in?
Seven brass finishes: Oil Rubbed Bronze (US10B), Satin Nickel (US15), Pewter (US15A), Polished Chrome (US26), Polished Brass Lifetime (US3), Unlacquered Brass (US3NL), and French Antique (US7). Unlacquered brass is the one to watch on a fleet of doors, it is left bare and will patina over time rather than holding the as-shipped look, while the lifetime polished brass keeps its finish.
12) Why does the Emtek 8559 mention a Schlage C keyway if it has no cylinder?
The 8559 Knoxville is built on Emtek's Schlage C keyway platform, so it keys into the same system as the rest of the Emtek line, but this particular version ships non-keyed with no cylinder supplied. That matters if you are standardizing a house or a unit on one key: the keyed openings can all be Schlage C while this interior-only opening stays thumbturn.
13) I want a keyed Emtek-style deadbolt with a thumbturn inside instead. What matches the 8559?
The 8559 is the non-keyed member of a cylinder x thumbturn family, so if you need key access outside you want a single cylinder deadbolt. Comparable single cylinder units we carry include the Dexter DB1000 (Grade 1, 1-3/8 to 1-7/8 inch doors), the Hager 3115 (Grade 2, Schlage C keyway, 1-3/8 to 1-3/4 inch), and the Accentra D111 (Grade 1, 2-3/8 inch backset). The Hager shares the 8559's Schlage C keyway, so it can be keyed into the same system.
14) What deadbolt should I use instead of the Emtek 8559 Knoxville if I don't know the backset on the existing bore?
The Emtek 8559 Knoxville is ordered for a specific backset, either 2-3/8 inch or 2-3/4 inch, so the bore has to be measured first. If you would rather field-adjust, the Brinks Raleigh Series round single cylinder deadbolt and the Brinks Mendocino Series square single cylinder deadbolt both use a 4 way adjustable backset, and the Cal-Royal ED500 Grade 3 single cylinder deadbolt has an adjustable backset for 1-3/8 inch to 1-3/4 inch doors. All three are keyed cylinder x thumbturn units rather than one-sided.
15) Is the Baldwin Reserve deadbolt spacer or the BEST 8T tube a substitute for the Emtek 8559 Knoxville deadbolt?
No. The Emtek 8559 Knoxville is a complete single sided tubular deadbolt with a thumbturn. The Baldwin Reserve 8BR0618001 is a deadbolt spacer for a double cylinder application, and the BEST 8T is the T Series tubular deadbolt tube component on its own. Both are pieces that go into or alongside a deadbolt assembly, not a finished lock you can hang on a door by itself.
16) What is the difference between the Emtek 8559 Knoxville and a double cylinder deadbolt like the Baldwin Estates 8011?
The Emtek 8559 Knoxville has no cylinder at all; it is thumbturn operated from the inside face only. The Baldwin Estates 8011 is a contemporary 1-5/8 inch double cylinder deadbolt, keyed on both faces, and the Baldwin Reserve double cylinder deadbolts come in contemporary round and contemporary square trims. Double cylinder units require a key on the inside as well as the outside, which some jurisdictions restrict on egress doors; the 8559's thumbturn releases by hand from inside.
17) Is there a deadbolt with an easier-to-grip thumbturn than the Emtek 8559 Knoxville for an accessible unit?
The Emtek 8559 Knoxville is thumbturn operated from the inside in a brass American Designer style. If grip is the concern, the Cal-Royal LSD is a Grade 3 single cylinder deadbolt with an ADA ergonomic thumbturn for 1-3/8 inch to 1-3/4 inch doors. It is a keyed cylinder x thumbturn lock, so the outside face takes a cylinder rather than staying blank as on the 8559.
18) Can I put the Emtek 8559 Knoxville on a door with no existing bore, or do I need a surface mounted deadbolt?
The Emtek 8559 Knoxville needs a 2-1/8 inch cross bore and a 1 inch edge bore, so the door has to be prepped. If you cannot bore the door, the Codelocks CL200 is a surface deadbolt with key override and the Codelocks CL2200 is an electronic surface deadbolt in a brushed steel finish, both light to medium duty. Surface units mount on the face of the door rather than through it, so they look different from the 8559's flush brass thumbturn.
19) Is there a code or credential deadbolt option instead of the mechanical Emtek 8559 Knoxville?
The Emtek 8559 Knoxville is a mechanical, non-electronic deadbolt. Electronic alternatives include the Delaney KP400 Grade 2 electronic deadbolt with a programmable remote, the Codelocks CL2210 electronic mortise deadbolt, and for multifamily credential systems the Dormakaba Saffire LX-D RFID electronic deadbolt with BLE and electronic lock override and the Dormakaba Nova-D RFID multihousing smart deadbolt. All of these operate on the outside face, which the 8559 leaves without any operator.
20) Will the Emtek 8559 Knoxville match other Emtek trim on my doors?
It is part of Emtek's Knoxville series in the Brass collection, American Designer styling, so it lines up with the rest of the brass Knoxville knobs and levers on adjoining doors. Match the finish code across the openings, for example US10B oil rubbed bronze on all of them, and the thumbturn will read as part of the same set.
How fast can I get the Emtek 8559-US26 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 8559-US26 come with a warranty?
Absolutely. The Emtek 8559-US26 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 8559-US26?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Emtek 8559-US26 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.