Emtek 8575 Neos Single Sided Deadbolt - Brass

It covers 1-3/8 inch through 2 inch doors. Standard build is for a 1-3/4 inch door, which is the usual commercial and exterior thickness, and anything thicker has to be called out when you order (there is a door thickness field on the order). The 8575 ships for 2-3/8 inch or 2-3/4 inch backset, so pick the one that matches your existing bore.

Yes, if the prep is standard. The Neos 8575 uses a 2-1/8 inch cross bore and a 1 inch edge bore, which is the common tubular deadbolt prep, and it is offered in both 2-3/8 inch and 2-3/4 inch backsets. Measure from the door edge to the center of the existing hole to decide which backset to order. Because there is no exterior trim, the outside face of the door will show the open bore unless it is covered or the door is not exposed on that side.

The Emtek 8575 Neos is a residential single sided deadbolt for interior installation and appearance. Where the opening calls for a fire rated deadbolt, the Hager 3215 is a Grade 2 commercial single cylinder deadbolt with a 1 inch throw and a fire rating for doors 1-3/8 inch to 1-3/4 inch, the Hager 3118 is the Grade 1 classroom version with a 6-pin Schlage C cylinder, and the Cal-Royal CRB800 is a Grade 1 heavy duty single cylinder deadbolt with a UL 3-hour fire rated latch.

The Emtek 8575 Neos is a single sided, non-keyed tubular deadbolt operated by thumbturn from inside only, with no cylinder or collar on the outside face. For the same one-sided arrangement from another maker, the Callan Model 205S is a one-sided half-bore deadbolt, and the Arrow E60 is a non-keyed exit deadlock with a blank plate on the outside and a thumbturn inside, covering doors 1-3/8 inch to 1-3/4 inch thick. The Arrow E60 carries a Grade 2 rating.

The Emtek 8575 Neos ships with no cylinder or collar and is thumbturn-operated from inside only, so it cannot be keyed from the exterior. For a keyed outside cylinder with an inside thumbturn, the Hager 3115 is a cylinder x thumbturn deadbolt with a Schlage C keyway for doors 1-3/8 inch to 1-3/4 inch thick, the Dexter DB2000-SCT is a Grade 2 single cylinder deadbolt over the same thickness range, and the Dexter DB1000-SCT is Grade 1 for doors 1-3/8 inch to 1-7/8 inch.

The Emtek 8575 Neos is designated for residential use and is intended for interior installation and appearance. Where a graded commercial deadbolt is specified, the Accentra D111 is Grade 1 with a 2-3/8 inch backset for doors 1-3/8 inch to 1-3/4 inch, the Cal-Royal CB160 is a Grade 2 single cylinder deadbolt with a tamper-resistant cylinder guard, and the Design Hardware D1 Series is a Grade 1 extra heavy duty double cylinder deadbolt for 1-3/4 inch doors.

Typical spots are a door you only ever secure from inside: a garage to house door, a basement or storage door, a French or double door leaf that stays fixed, a door being retired from key use. It is built for interior installation and appearance and Emtek classes it as residential hardware, so it is not the part for a tenant entry or a commercial exterior opening where someone needs key access from outside.

Seven finishes: Oil Rubbed Bronze (US10B), Lifetime Polished Nickel (US14), Satin Nickel (US15), Flat Black (US19), Polished Chrome (US26), Unlacquered Brass (US3NL) and Satin Brass (US4). The body is solid brass, from Emtek's Brass collection, so the finishes line up with other Emtek brass knobs and levers carrying the same US code. Unlacquered brass is the one to watch, it is meant to patina over time rather than hold its as-shipped look.

Two things beyond finish. Backset is required, either 2-3/8 inch or 2-3/4 inch. Door thickness is optional and only needs entering if your door is thicker than the standard 1-3/4 inch, up to the 2 inch limit. No cylinder or keying decision is involved, the 8575 is non-keyed.

The 8575 itself is non-keyed, thumbturn only, and no cylinder ships with it. The Schlage C keyway reference is the Emtek platform standard, which matters if you are keying other Emtek deadbolts on the same building alike, not for this particular part. If you need a keyed unit on the same keyway, the Hager 3115 and Hager 3215 are also built on Schlage C.

The Callan Model 205S is a one sided half-bore deadbolt, which avoids boring straight through the door. The Emtek 8575 is a full tubular prep, 2-1/8 inch cross bore with a 1 inch edge bore, so the hole goes all the way through even though nothing mounts on the outside face.

The Emtek 8575 Neos is a contemporary, curvilinear brass deadbolt in finishes including oil rubbed bronze (US10B), satin nickel (US15), flat black (US19) and unlacquered brass (US3NL). For a keyed contemporary companion, the Bravura 310RC Elite is a Grade 2 contemporary round deadbolt and the Bravura 310SC Elite is the square-trim version, both cylinder x thumbturn; Baldwin Reserve also offers contemporary round and square double cylinder deadbolts.

The Emtek 8575 Neos covers door thicknesses of 1-3/8 inch to 2 inches with a standard 1-3/4 inch door assumed. For thicker leaves, the Corbin Russwin DL3011 cylindrical deadlock covers 1-3/4 inch to 2-1/4 inch doors. If the door falls inside the Neos range, the Deltana 7312KA2 double cylinder deadbolt also spans 1-3/8 inch to 2 inches.

The Emtek 8575 Neos is a tubular deadbolt requiring a 2-1/8 inch cross bore, a 1 inch edge bore, and a 2-3/8 inch or 2-3/4 inch backset. Where no bore is available or a surface-applied solution is wanted, the Codelocks CL200 is a surface deadbolt with key override, and the Dormakaba D900 is a small case mortise deadbolt, cylinder x thumbturn, keyed different with SC keyways.

The Emtek 8575 Neos is thumbturn-operated from the inside in a curvilinear contemporary trim. Where an ergonomic turn piece is wanted, the Cal-Royal LSD is a Grade 3 single cylinder deadbolt with an ADA ergonomic thumbturn covering doors 1-3/8 inch to 1-3/4 inch; note it is keyed on the outside rather than single sided.

The Emtek 8575 Neos is non-keyed and ships with no cylinder, so it does not accept a core. For SFIC or interchangeable core keying, the Arrow E61 26D IC is a Grade 2 single cylinder deadlock with SFIC prep supplied less core for doors 1-3/8 inch to 1-3/4 inch, the Deltana CL200LAIC is a Grade 2 single deadbolt with interchangeable core prep and a 2-3/4 inch backset, and the Delaney LM Series 301702 is a Grade 1 single cylinder less core deadbolt in dull chrome US26D.

Neos is Emtek's contemporary line, a curvilinear thumbturn shape rather than a traditional knurled or colonial turn. If you want a squared contemporary profile from another brand instead, the Baldwin Reserve Contemporary Square deadbolt and the Bravura 310SC Elite are square trim; the Bravura 310RC Elite is the round contemporary version.

No. The Emtek 8575 Neos is a non-electronic mechanical tubular deadbolt operated only by an inside thumbturn. Electronic deadbolts are a different category of product: the Delaney KP400 is a Grade 2 electronic deadbolt with a programmable remote, the Codelocks CL2200 is an electronic surface deadbolt, and the Dormakaba Saffire LX-D is an RFID electronic deadbolt with electronic lock override. None of these duplicate the trim-only, one-sided interior arrangement of the 8575.

No. The Emtek 8575 Neos is a complete single sided deadbolt with inside thumbturn trim for doors 1-3/8 inch to 2 inches thick. The BEST 8T T Series is a tubular deadbolt tube component, not a finished trimmed lock, and the Arrow 460 is a mortise lock strike for latchbolt and deadbolt functions with a straight lip. Both are pieces that work with other locks rather than substitutes for the 8575.