Emtek 8572 #11 Tuscany Bronze Single Sided Deadbolt - Lost Wax Cast Bronze

Thumbturn only. The 8572 Tuscany single sided deadbolt is non-keyed and operates from the inside face of the door by turn only, with no cylinder and no outside collar supplied. It shows as blank on the exterior face, so use it where you never need to lock or unlock from outside: an interior door, a closet or storage room, a door that already has a keyed lock elsewhere on it, or an inactive leaf of a pair.

It fits doors from 1-3/8 inch up to 2 inch thick, and ships set up for the standard 1-3/4 inch door, so if your door is thicker than that you need to state the thickness when you order. Prep is the normal tubular deadbolt pattern: a 2-1/8 inch cross bore through the face and a 1 inch edge bore.

Backset is a required choice on the 8572 and it comes in 2-3/8 inch or 2-3/4 inch. Measure from the door edge to the center of the existing 2-1/8 inch cross bore: 2-3/8 inch is the usual residential interior backset, 2-3/4 inch is the deeper one often used on entry doors. If you are boring fresh, match the backset already used on the other hardware in that door so the trim lines up.

No. The 8572 is a residential-rated decorative deadbolt with no grade or fire rating behind it, and it is not an exit device. For a non-keyed deadbolt on a commercial opening, look at the Arrow E60, a Grade 2 exit deadlock with a blank plate on one side and a thumbturn on the other, rated for 1-3/8 to 1-3/4 inch doors.

Usually yes. It is a tubular deadbolt using the standard 2-1/8 inch cross bore and 1 inch edge bore, so an existing residential deadbolt prep normally takes it. Two things to check first: that the old bolt's backset matches the 2-3/8 or 2-3/4 inch you order, and that the door falls in the 1-3/8 to 2 inch thickness range. Because the outside face is blank, any hole or wear mark left by the old exterior trim will be exposed.

The Emtek 8572 is a single sided, non-keyed deadbolt operated by thumbturn from inside only, with no cylinder or collar. If the opening needs outside key control, a cylinder x thumbturn deadbolt is the substitute: the Dexter DB2000 single cylinder deadbolt is Grade 2 and covers 1-3/8 inch to 1-3/4 inch doors, and the Dexter DB1000 single cylinder deadbolt is Grade 1 over 1-3/8 inch to 1-7/8 inch. The Hager 3215 single cylinder deadbolt is a Grade 2 commercial lock with a 1 inch throw over 1-3/8 inch to 1-3/4 inch doors.

The Emtek 8572 is a residential tubular deadbolt in lost wax cast bronze with a non-keyed, single sided function. For a commercial opening needing the same thumbturn-only operation, the Arrow E60 exit deadlock is a Grade 2 non-keyed unit with a blank plate outside and thumbturn inside, covering 1-3/8 inch to 1-3/4 inch doors. The Callan Model 205S is a Grade 3 one-sided half-bore deadbolt, which drills only partway through the door rather than a full cross bore.

The Emtek 8572 is built around the Schlage C keyway even though the single sided version ships without a cylinder or collar. Among keyed deadbolts on the same keyway, the Hager 3115 is a Grade 2 cylinder x thumbturn deadbolt with a Schlage C keyway, the Hager 3118 is a Grade 1 classroom deadbolt with Schlage C and a 6-pin cylinder, and the Hager 3214 is a Grade 2 double cylinder with Schlage C. The Dormakaba D900 small case mortise deadbolt is also offered keyed different with SC keyways.

The Emtek 8572 is a residential tubular deadbolt. For heavier use, the Accentra D111 is a Grade 1 single cylinder deadbolt with a 2-3/8 inch backset for 1-3/8 inch to 1-3/4 inch doors, the Falcon D111 is a Grade 1 heavy duty classroom deadbolt with adjustable backset, and the Design Hardware D1 Series is an extra heavy duty Grade 1 double cylinder deadbolt for 1-3/4 inch doors. Cal-Royal's CRB800 is a heavy duty single cylinder deadbolt with a UL 3-hour fire rated latch.

The 8572 is a lost wax cast bronze piece from Emtek's Tuscany Bronze collection, with a brass lock body behind it. Two finishes: Flat Black Bronze (FB) and Medium Bronze (MB). Both are living bronze finishes, so they will shift over time with handling and exposure, which is why they tend to get specified in sets across a home rather than one door at a time.

The Emtek 8572 covers 1-3/8 inch to 2 inch doors as standard, with 1-3/4 inch the default. For a thicker leaf, the Corbin Russwin DL3011 cylindrical deadlock is listed for 1-3/4 inch to 2-1/4 inch doors. If the door is a fixed 1-3/4 inch commercial leaf, the Corbin Russwin DL3211 and the Design Hardware D1 Series double cylinder deadbolt are both specified at 1-3/4 inch.

The Emtek 8572 uses a cast bronze Tuscany thumbturn matched to the decorative collection. Where an easier grip is the priority, the Cal-Royal LSD is a Grade 3 single cylinder deadbolt with an ADA ergonomic thumbturn for 1-3/8 inch to 1-3/4 inch doors. It differs from the 8572 in being keyed from the outside rather than thumbturn-only.

No. The Emtek 8572 is a complete single sided tubular deadbolt with a thumbturn, offered in Flat Black Bronze and Medium Bronze. The Baldwin 8BR0618001 is a deadbolt spacer for a double cylinder application, and the BEST 8T is a T Series tubular deadbolt tube component - both are pieces that go into or behind a lock rather than a finished deadbolt assembly.

The Emtek 8572 is a Tuscany Bronze collection deadbolt in lost wax cast bronze, a traditional decorative look. For contemporary trim, the Baldwin Reserve line offers a double cylinder contemporary round deadbolt and a double cylinder contemporary square deadbolt, and the Baldwin Estates 8011 is a 1-5/8 inch contemporary double cylinder deadbolt. Bravura's 310RC Elite round and 310SC Elite square are Grade 2 contemporary cylinder x thumbturn deadbolts.

The Emtek 8572 requires the backset to be called out as either 2-3/8 inch or 2-3/4 inch at order time. If you would rather stock one part for mixed bores, the Brinks Raleigh and Brinks Mendocino single cylinder deadbolts both use a 4-way adjustable backset, and the Cal-Royal ED500 is a Grade 3 single cylinder deadbolt with adjustable backset for 1-3/8 inch to 1-3/4 inch doors. All three are keyed from the outside, unlike the thumbturn-only 8572.

The Emtek 8572 is a non-electronic mechanical deadbolt. Electronic alternatives include the Delaney KP400, a Grade 2 electronic deadbolt with programmable remote, the Codelocks CL2200 electronic surface deadbolt in brushed steel, and the Dormakaba Saffire LX-D RFID electronic deadbolt with BLE and electronic lock override.