Emtek 96313 Solid Brass Square...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$100.00
$81.49
Emtek Emtek 96313 Solid Brass Square Barrel Heavy Duty Hinges (Pair), 3-1/2" x 3-1/2" (Thinner Leaf Thickness 0.125") EMTEK-96313

Emtek 96313 Solid Brass Square Barrel Heavy Duty Hinges (Pair), 3-1/2" x 3-1/2" (Thinner Leaf Thickness 0.125")

(No reviews yet) Write a Review

Model: 96313-US26
From the Brass Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$100.00
$81.49
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Emtek 96313 Solid Brass Square Barrel Heavy Duty Hinges (Pair), 3-1/2" x 3-1/2" (Thinner Leaf Thickness 0.125")

Emtek's popular Heavy Duty, Square Barrel Solid Brass Hinge is now available in a new, thinner leaf option.

While similar in style, the new Square Barrel Hinge option has a more standardized thickness of 0.125" vs the original 0.180" and features a small step on the wing near the knuckle which provides a more pronounced square hinge profile when the door is closed.

The hinge barrel also features no exposed screws for an aesthetically clean look, unlike some other options on the market.

- Sold in Pairs, includes screws


 

Specifications:

  • Size: 3-1/2" x 3-1/2" or 4" x 4"
  • Material: Brass
  • Door Thickness: Up to 1-3/4"
  • Sold: Sold in pairs

Product Specs

Subcategory:
Hinges
Collection:
Brass
Product Group:
Door Hinges and Pivots
Corner Style:
Square Corners
Product Subgroup:
Full Mortise Hinges
Product Type:
Hinges
Commercial/Residential:
Residential
Bearing Type:
Plain Bearing
Series:
Square Barrel Hinges
Theme:
Contemporary
Electronic:
No
MAP Policy:
Yes
Product Model:
96313
Product Size:
3.5" x 3.5"
Product Shape:
Square
Product Style:
Square Barrel
Product Material:
Brass
Product Category:
Door Hinges and Pivots
Product Substrate:
Brass
Department:
Door Hardware

Emtek 96313-US26 – Frequently Asked Questions

1) What is the difference between the 0.125 inch and 0.180 inch Emtek square barrel hinge?
Two things. The 0.125 inch leaf is the more standardized hinge thickness, so it matches the mortise depth of typical hinges rather than needing a deeper cut. It also has a small step on the wing near the knuckle, which reads as a more pronounced square profile when the door is closed. The original 0.180 inch version is the thicker leaf. Both are solid brass square barrel hinges; if you are matching hinges already on other doors in the house, match the leaf thickness so the reveals stay consistent.
2) Are Emtek 96313 brass hinges suitable for a commercial door or an office building?
No. The 96313 is a residential hinge with a plain bearing, meaning the knuckles ride metal on metal rather than on ball or concealed bearings. That is fine for a house door opened a few dozen times a day, not for a commercial opening with a closer on it or heavy daily traffic. For commercial work, ZenSupply carries the Ives 3CB1HW heavy weight concealed bearing full mortise hinge, the Hager BB1168 non-removable pin full mortise ball bearing heavy duty hinge, and the Don-Jo HWBB74545 heavy weight ball bearing hinge in 4-1/2 by 4-1/2 inch.
3) Can I use Emtek 96313 hinges on an exterior door for security?
On an outswing exterior door, no, and the reason is the pin. The 96313 is a plain bearing hinge with no non-removable pin feature stated, so on an outswing door the hinges sit on the exterior side and the pin is reachable. For that opening, ZenSupply carries the Deltana CSB45N 4-1/2 by 4-1/2 inch square hinge with a non-removable pin, the Deltana DE44R5TA 4 by 4 inch security hinge, and the Hager BB1168 non-removable pin ball bearing hinge. On a normal inswing door the pin is inside and the 96313 is fine.
4) What is the closest square-corner residential alternative to the Emtek 96313 3-1/2 inch square barrel hinge?
The Deltana DSB35 is a 3-1/2" x 3-1/2" square hinge sold as a residential pair, matching the 96313 on size, square corners, and pair packaging. The Emtek 96313 is solid brass with a square barrel and a stepped wing at the knuckle for a pronounced square profile when closed; the Deltana DSB35 is described simply as a square residential hinge in the same 3-1/2 inch size. If the door prep is already cut for a 3-1/2 inch square-corner mortise, either drops into that prep.
5) The door prep is 3-1/2 inch with radius corners, not square. What hinge fits instead of the Emtek 96313?
The Emtek 96313 has square corners, so it will not seat in a radius-corner mortise without recutting the prep. For a 3-1/2 inch radius prep, the Delaney 3-1/2" x 3-1/2" bulk steel residential interior hinge uses a 5/8" radius and is sold in pairs, and the Orca Hardware 3.5" x 3.5" plain bearing commercial hinge uses a 1/4" radius corner at medium duty. Match the radius already cut in the door and jamb, since 5/8" and 1/4" are not interchangeable.
6) Can the Emtek 96313 be used on a door that carries power to an electrified lock?
No - the Emtek 96313 is a non-electronic hinge. To carry power through the hinge, the Command Access ETH-CB70 is an energy transfer hinge with a 3 knuckle standard weight steel base at medium duty, and the ETH-BB68 is a 5 knuckle heavy duty steel base energy transfer hinge. If the opening also needs door position monitoring, the Command Access ETM-CB70 adds door position sensing on a 3 knuckle steel base and the ETM-BB68 integrates a door position switch at heavy duty. Only one hinge in the set needs to be the transfer hinge; the remaining leaves can stay conventional.
7) The door needs a hinge the pin cannot be pulled from. What replaces the Emtek 96313?
The Emtek 96313 square barrel hinge has no exposed screws on the barrel but is a standard pin hinge. Where the pin must not come out, the Deltana CSB45N is a 4-1/2" x 4-1/2" square hinge sold in pairs with a non-removable pin, and the Hager BB1168 is a heavy duty full mortise ball bearing hinge with a non-removable pin. The Deltana DE44R5TA is a 4" x 4" x 5/8" radius security hinge in steel with tamper-resistant screws, sold in pairs, for a radius prep. All three are larger than 3-1/2 inch, so check the existing mortise before ordering.
8) How many Emtek 96313 hinges do I need for one door, and do screws come with them?
The 96313 ships as a pair with screws included. Most interior doors take three hinges, so a single door usually means ordering two pairs and having one hinge left over, or two doors covered by three pairs. Light interior doors hung on two hinges are covered by one pair.
9) What finishes do Emtek 96313 square barrel hinges come in?
Ten, and the list is what decides whether they match the levers and knobs already on the door: Polished Brass Lifetime (US3), Unlacquered Brass (US3NL), 606 Satin Brass, 613 Satin Bronze Oil-Rubbed, French Antique (US7), Polished Nickel (US14), Pewter (US15A), 619 Satin Nickel, Flat Black (US19), and 625 Bright Chrome. Unlacquered brass is the one to watch: it has no clear coat, so it darkens and patinas with handling rather than staying bright like the lifetime polished brass.
10) I need 4 inch by 4 inch square barrel hinges, not 3-1/2 inch. Does Emtek make them?
Emtek's square barrel hinge comes in both 3-1/2 by 3-1/2 inch and 4 by 4 inch. Model 96313 is the 3-1/2 inch size, so ordering it will get you the smaller hinge. Ask for the 4 by 4 inch square barrel hinge by size if that is what your door is mortised for. The wider 4 inch leaf is what heavier solid core and exterior doors are usually hung on.
11) What makes a square barrel hinge different from a regular hinge, and why would I pick one?
It is an appearance decision. A standard hinge has a rounded barrel with visible knuckles; a square barrel hinge squares off that profile so the exposed edge reads as a clean rectangle when the door is closed. The Emtek version also has no exposed screws on the barrel. It suits contemporary and square-detail interiors where the door lever, pulls, and hinges are all squared. If the look does not matter to you, a plain residential hinge such as the Schlage Residential S3P1010 in 3.5 by 3.5 inch square corner or the Delaney 3-1/2 by 3-1/2 inch bulk steel residential hinge does the same job.
12) Can I run electrified hardware or a door position switch through an Emtek 96313 hinge?
No. The 96313 carries no wiring path, it is a plain brass butt hinge. Power transfer through the hinge takes a purpose-built unit: ZenSupply carries the Command Access ETH-BB68 energy transfer hinge on a heavy duty steel base, the ETH-CB70 3-knuckle standard weight version, and the ETM-BB68 energy transfer monitor hinge with an integrated door position switch if you also need door status back to the panel. The BEST CECB179-12C full mortise concealed bearing electrified hinge with a 12-wire quick connect is another route when the opening needs more conductors.
13) I manage apartments and want one hinge across all the units. Is the Emtek 96313 the right standard?
Only for unit interior doors, and only if the look is worth the cost. It is a residential plain bearing solid brass hinge in 3-1/2 by 3-1/2 inch, sold two at a time, which is a decorative spec rather than a fleet spec. For turning over interior doors in volume, the Delaney 3-1/2 by 3-1/2 inch bulk steel residential hinge with a 5/8 inch radius or the Ives 1010RP steel plain bearing residential hinge with square corners (set of three) are built for that. Note the Delaney is 5/8 inch radius corner, so it will not drop into a square corner mortise; the Ives 1010RP is square corner like the Emtek.
14) Is there a plainer 3-1/2 inch square corner hinge to use where the Emtek 96313 brass finish is not needed?
For back-of-house doors where the decorative square barrel is not part of the design, the Schlage Residential S3P1010 is a 3.5" x 3.5" square corner plain bearing mortise hinge at medium duty, sold in packs of three. It shares the 96313's 3-1/2 inch square-corner prep and plain bearing, so it goes into the same mortise. The Emtek 96313 is solid brass in ten finishes including unlacquered brass and flat black; the S3P1010 is a functional hinge without that finish range. Note the pack counts differ - the Emtek is sold in pairs, the Schlage in threes, which is the count a standard door with three hinges actually needs.
15) Which hinge should be used instead of the Emtek 96313 when the door needs to close itself?
The Emtek 96313 is a plain bearing full mortise hinge with no closing mechanism. Where the door has to self-close, the Stanley Security 2060R is a full mortise spring hinge with square corners at 4.5" x 4.5" on a ferrous steel base, rated heavy duty. It is a larger hinge, so it needs a 4-1/2 inch prep rather than the 3-1/2 inch prep the 96313 uses.
16) The Emtek 96313 is going on an exterior entry door. Is there a hinge built for that instead?
The Emtek 96313 is a residential solid brass hinge in 3-1/2" x 3-1/2" and 4" x 4" sizes, rated for doors up to 1-3/4" thick. For an exterior opening specifically, the Delaney 4" x 4" bulk residential exterior hinge uses a 5/8" radius and is sold in pairs. Exterior doors are usually 1-3/4" and hung on 4 inch hinges, so confirm which size the existing prep is cut for and whether the corners are square or 5/8" radius before ordering either.
17) Is the Deltana DSB3 a substitute for the Emtek 96313?
Not directly. The Deltana DSB3 is a 3" x 3" square hinge sold in pairs, while the Emtek 96313 is 3-1/2" x 3-1/2". A 3 inch hinge leaves a half inch of unfilled mortise in a prep cut for 3-1/2 inch, and the screw pattern will not line up. The DSB3 belongs on lighter doors already prepped at 3 inch, such as closet and cabinet-style doors; for a 3-1/2 inch prep, stay with a 3-1/2 inch hinge.
18) Does the Ives 1010RP replace the Emtek 96313?
They share the same prep - the Ives 1010RP is a steel plain bearing residential hinge with square corners, matching the Emtek 96313's square corners and plain bearing. The differences are material and count: the 96313 is solid brass sold in pairs with screws, in finishes from unlacquered brass to satin nickel and pewter, while the 1010RP is steel and comes as a set of three at medium duty. On a door where the hinge is a visible part of the trim package, the brass square barrel is the one being specified; on a painted interior door where it is not, the 1010RP does the same job.
19) Are Emtek 96313 hinges solid brass all the way through or brass plated steel?
Solid brass. Both the material and the substrate are brass, so the finish is applied over brass rather than plated steel. That matters on exterior and coastal doors where a plated steel hinge rusts through at the knuckle, and it is also why the unlacquered brass option patinas rather than flaking.
20) Do I have to order left hand or right hand Emtek 96313 hinges?
No handing to specify. The 96313 is a symmetrical full mortise butt hinge sold as a pair, so the same hinge works on a left hand or right hand door. Handing only becomes a spec on hinges built for one swing, such as spring hinges or electrified hinges with a wire side, like the Stanley CECB1900R54L which is ordered left-handed.
21) The 4 inch Delaney Castlegate hinge and the Emtek 96313 both come in 4 inch - what is the difference?
The Delaney 4" x 4" residential hinge for Castlegate is furnished with a 5/8" radius by square corner combination and sold in pairs. The Emtek 96313 in 4" x 4" is square corners on both leaves in solid brass with a square barrel. The corner combination is the deciding detail: a hinge with one radius leaf is meant for a jamb routed with a radius and a door with a square cut, and it will not sit right where both sides are square.
How fast can I get the Emtek 96313-US26 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 96313-US26 come with a warranty?
Absolutely. The Emtek 96313-US26 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 96313-US26?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Emtek 96313-US26 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!