Emtek Bezier Cabinet Knob, Schaub Collection

Two diameters: 1-3/8 inch and 1-5/8 inch. The smaller one suits upper cabinet doors and narrow drawer fronts; the 1-5/8 inch reads better on wide or tall drawer banks where a small knob looks lost. Both sizes are offered in every finish the Bezier knob is made in, so you can mix sizes across a kitchen without a finish mismatch.

A mounting screw is included with each knob. Standard cabinet knob screws are 8-32 machine screws, so if your doors or drawer fronts are thicker than usual (applied moulding, thick slab fronts) you may need a longer 8-32 screw than the one supplied.

The Emtek Bezier cabinet knob is brass and comes in 1-3/8 inch and 1-5/8 inch sizes. For another solid brass knob in a similar hand size, the Schaub 10040 Cafe Collection Modern Oval cabinet knob is solid brass at 1 inch diameter with 7/8 inch center to center, and the Delaney Solid Brass Cabinet Knob is also solid brass. The Deltana KRB175 Round Knob with Groove is solid brass and heavy-duty at 1-3/4 inch diameter, slightly larger than the Bezier's 1-5/8 inch.

Not quite. The Emtek Bezier is a knob that ships with a single mounting screw. The Schaub 10030 Cafe Modern Oval Slot cabinet knob is 1 inch diameter with 7/8 inch center to center, meaning it is drilled on two holes rather than one - so it is not a drop-in swap into a single-hole cabinet door without redrilling. The Schaub 10040 Cafe Collection oval knob also lists 7/8 inch center to center.

Six finishes, all in standard US codes: Satin Brass (US4), Oil Rubbed Bronze (US10B), Polished Nickel (US14), Satin Nickel (US15), Flat Black (US19) and Polished Chrome (US26). Because they are coded to the usual US finish numbers, they line up with the finish you already specified on your passage and privacy door hardware.

It is classified as residential hardware. For apartment turns and light common-area millwork that is usually fine, but on an institutional or high-traffic commercial casework spec, look at a heavy-duty knob instead. The Deltana KRB175 is catalogued as a heavy-duty solid brass round knob at 1-3/4 inch diameter.

Yes. The Bezier is built out as a full 12-option matrix, six finishes across both the 1-3/8 inch and 1-5/8 inch diameters, so you can run one finish through cabinets, drawers and pantry millwork and vary only the size by front width. Since it is a one-hole knob, the drilling stays identical regardless of which diameter you choose for a given front.

The Bezier is a contemporary, curvilinear knob. For a different design language, the Orca Hardware CK-18032 Mission Round cabinet knob comes from the 18-Mission Collection, and the Orca Hardware CK-19032 Whistler cabinet knob comes from the 19-Whistler Collection. Both are cabinet knobs, so the application is the same.

No. The Bezier starts at 1-3/8 inch. Smaller choices include the Schaub 1200 Modo knob at 16 mm in zinc and aluminum, and the Schaub 10030 Cafe Modern Oval Slot knob and Schaub 10040 Cafe oval knob, both 1 inch diameter in solid brass.

It is a contemporary, curvilinear design, so it reads modern rather than period. If the millwork is Mission or Craftsman, the Orca CK-18032 Mission round knob is the closer stylistic match, and the Schaub 131 Artifex round knob in Britannium at 1-1/2 inch diameter suits a rustic or hand-forged look.

No, it is purely mechanical cabinet hardware with a single mounting screw. There is nothing to wire and no battery or power requirement.