Emtek Carbon Fiber Cabinet Bin Pull - Silver, Schaub Collection

Two hole spacings: 3 inch and 4 inch center-to-center. If you are replacing an existing bin pull, measure between the centers of the two screw holes in the drawer face and match that number exactly, otherwise you are re-drilling fronts. Both spacings are offered in Satin Nickel (US15) and Polished Chrome (US26).

At 4 inch center-to-center, the Omnia 1968/102 is a forged solid brass modern cabinet pull with 4 inch center-to-center spacing, the Schaub 10011 Sabre is a solid brass edge pull at 4 inch center-to-center, and the Trimco 562 Series drawer pull lists 4 inch among its ctc options along with 3-1/2 inch and 96mm. The Emtek Carbon Fiber bin pull is also made in 4 inch center-to-center, in Satin Nickel US15 and Polished Chrome US26.

For a 3 inch center-to-center drawer pull from another maker, the Trimco 553 Series drawer pull is offered at 3 inch ctc, and the Schaub 10010 Sabre edge pull is a solid brass pull at 3 inch center-to-center. The Emtek Carbon Fiber bin pull at 3 inch ctc differs in form: it is a bin pull, a surface-mount handle with brass or carbon fiber construction, where the Schaub 10010 is an edge pull that mounts at a door or drawer edge and the Trimco 553 is a bail-style drawer pull.

The Schaub 10010, 10011 and 10012 Sabre pulls are edge pulls, mounted at the edge of a door or drawer rather than face-mounted like the Emtek Carbon Fiber bin pull, which is a surface-mount bin pull. The Schaub 79-8 Steamworks 8 inch pull is an appliance pull, sized for refrigerator and panel fronts. And the Orca Hardware CK-15030 and CK-16030 Bachelor Collection pieces are 1-1/4 inch diameter cabinet knobs with a single screw, not two-hole pulls, so they will not cover an existing 3 or 4 inch hole pair.

No. The Emtek Carbon Fiber Cabinet Bin Pull is made in 3 inch and 4 inch center-to-center only. For a 5 inch hole spacing, the Schaub 10012 Sabre Collection edge pull is built at 5 inch center to center.

Surface mount, through two screw holes in the drawer face. No routing or recess is needed, so it works on flat slab and shaker drawer fronts alike.

It is a residential product. For high-traffic commercial millwork or institutional casework, a heavier bar pull such as the Deltana SBP35 solid brass square bar pull, listed as heavy-duty, is the better direction.

A bin pull is a cup-style handle, gripped from underneath, so it reads and works best on drawer fronts. On doors you want something you can pull straight out, like a knob or a bar pull. If you need doors to match, pair drawers with this bin pull and use a knob such as the Orca Hardware Bachelor Collection round knob at 1-1/4 inch diameter on the doors.

No. The Carbon Fiber bin pull tops out at 4 inch center-to-center, which is drawer scale. For an appliance panel, look at an appliance pull such as the Schaub 79-8 Steamworks 8 inch cabinet pull.

The finish is Satin Nickel US15, the standard BHMA finish designation, so it lines up with other US15 hardware. Polished Chrome here is US26. Finishes from different manufacturers under the same code are close but not always a dead match in tone, so if the run is visible side by side, buy one piece first and hold it against what is on the cabinets.

The Emtek Carbon Fiber Cabinet Bin Pull is designated residential. If you want a heavier bar-style pull, the Deltana SBP35 Modern Square Bar Pull is a 3-1/2 inch heavy-duty solid brass pull, and the Omnia 1969, 1970 and 1971 modern cabinet pulls are forged solid brass, with 1-3/16 inch projection on the 1969 and 1971 and 1-1/4 inch on the 1970. The Trimco 562 Series drawer pull is another all-metal option with 3-1/2 inch, 4 inch and 96mm ctc choices for standardizing across a building.

The Emtek Carbon Fiber bin pull is made in Satin Nickel US15 and Polished Chrome US26. For a plainer satin nickel handle, the Orca Hardware CK-12001 is a T-pull bar with a 2 inch bar width in steel, satin nickel finish. That is a bar pull rather than a bin pull, so the grip is an open bar instead of a recessed cup.

Brass is the substrate and body material, with the carbon fiber styling giving it the silver contemporary look. Emtek lists it under the Brass collection with carbon fiber as the style.

Emtek classes it as contemporary. The carbon fiber styling in silver is a modern read rather than the traditional bronze or brass cup pull look, so it sits well with flat-panel and slab cabinetry.