Emtek Classic Brass Crystal Knobsets - Diamond Knob, Dummy (Pair)
- Can be ordered with any Brass rosette
- Sold as complete set.
Specifications:
- Door Thickness: 1-3/8" to 1-3/4"
- Mount: Surface Mount (no door prep required)
- Material: Brass
Manufacturer Resources
Product Specs
- Collection:
- Glass & Porcelain
- Product Type:
- Knobsets
- Product Group:
- Mechanical Locks
- Product Subgroup:
- Bored Locksets
- Subcategory:
- Knobsets
- Commercial/Residential:
- Residential
- Keyed Function:
- Non-Keyed
- Keyed:
- No
- Handle Type:
- Knob
- Lock Function:
- Dummy
- Lock Type:
- Tubular
- Series:
- Diamond
- Theme:
- American Classic
- Electronic:
- No
- MAP Policy:
- Yes
- Product Function:
- Dummy
- Product Style:
- Glass
- Product Material:
- Brass
- Product Category:
- Mechanical Locks
- Product Substrate:
- Brass
- Department:
- Door Hardware
Emtek 8050.CK.US15 – Frequently Asked Questions
1) Will an Emtek crystal dummy knob work on a 1-3/8 inch door as well as a standard 1-3/4 inch door?
Yes. The Diamond crystal dummy knobset covers 1-3/8 inch to 1-3/4 inch doors, which spans older interior doors at 1-3/8 and standard 1-3/4 inch doors. Anything thicker than 1-3/4 falls outside the range.
2) Is this Emtek Diamond dummy sold as one knob or two?
It ships as a pair, one knob for each face of the door, and comes as a complete set with the rosettes. If you only need a single knob on one side, a single dummy such as the Schlage A170 or the Omnia 442/00 is the right item instead.
3) Does this crystal knob lock or latch at all?
It does neither. This is a non-keyed dummy trim with no latch, no cylinder and no turn, so it is pull-only hardware. For a door that needs to stay shut, look at a passage function knob; for bed and bath, a privacy function. Both exist in comparable residential lines, for example the Baldwin Estate 5011 Colonial passage knob or the Deltana 6112 St. Thomas privacy knob.
4) Can the Emtek Diamond crystal knob dummy pair be used on an entry door that needs a key?
No. The Emtek Diamond crystal knob set in dummy function is non-keyed and has no cylinder. For a keyed entry knob, the Kwikset 400P-CP is a Grade 3 keyed entry Polo knob for doors 1-3/8 inch to 1-3/4 inch with a round corner adjustable latch and strike, the Deltana 3381 Egg Knob is an entry set for doors 1-3/8 inch to 2 inch, and the Cal-Royal BER00 is a Grade 3 entrance/office knob lock with a Kwikset keyway.
5) What is a comparable dummy knob to the Emtek Diamond crystal knob dummy pair if a commercial-grade trim is required?
The Emtek Diamond crystal knob dummy pair is a residential brass dummy set in a glass and porcelain design. Where a commercial-grade dummy trim is called for, the Schlage A170 is a Grade 2 heavy duty cylindrical non-keyed dummy trim for doors 1-3/8 inch to 1-7/8 inch, and the BEST 6K Series single dummy trim is a Grade 2 medium duty non-keyed dummy. Both are single dummy trims, while the Emtek Diamond dummy is sold as a pair for both faces of the door.
6) I need a knob for a door that actually latches, not a dummy. What should I order instead?
The Emtek Diamond crystal knob set in dummy function is surface mounted and does not operate a latch. For a door that needs to close and latch without locking, the Omnia 434/PA is a solid brass egg-shaped knob latchset in passage function, and the Baldwin Estate 5011 Colonial is a passage knob with the 5058 rose. For a bed or bath door, the Baldwin Estate 5077 Bethpage is a privacy knob with the R027 rose and the Deltana 6112 St. Thomas is a privacy knob for doors 1-3/8 inch to 2 inch.
7) What should I use instead of the Emtek Diamond crystal knob on a high-traffic commercial opening?
The Emtek Diamond crystal knob dummy pair is designated for residential use. For heavier traffic, the Falcon X101 is a Grade 1 heavy duty cylindrical passage knobset with interchangeable core, fire rated, for doors 1-3/8 inch to 2-1/4 inch; the Corbin Russwin CK4310 is a Grade 1 passage/closet cylindrical lock with Global knob for 1-3/8 inch to 2 inch doors; and the Sargent 8XG04 is a Grade 1 heavy duty storeroom/closet knob lock with a 2-3/4 inch backset.
8) Can I match the Emtek Diamond crystal knob to the other door hardware in the room?
Yes, within brass. The Diamond knob can be ordered with any brass rosette, and there are seven rosette shapes: #8, Oval, Quincy, Rectangular, Regular, Watford and Wilshire. Finishes run to ten: Flat Black (US19), French Antique (US7), Oil Rubbed Bronze (US10B), Pewter (US15A), Polished Brass Lifetime (US3), Polished Chrome (US26), Polished Nickel Lifetime (US14), Satin Brass (US4), Satin Nickel (US15) and Unlacquered Brass (US3NL).
9) Is an Emtek crystal knobset suitable for a commercial building or apartment corridor?
It is classed as residential hardware from Emtek's Glass and Porcelain collection, with a brass body and glass knob. For commercial traffic and specified openings you want a graded cylindrical product instead, such as the Grade 1 Schlage D10S passage or the Grade 2 BEST 6K single dummy trim if you need dummy function in a commercial spec.
10) I need a dummy knob for the inactive leaf of a double door. Is this the right part?
It suits that job. Because the Diamond crystal set is surface mounted with no latch, it gives you a matching pull on a leaf held by flush bolts or a surface bolt, on doors 1-3/8 to 1-3/4 inches thick. Note it is a pair, so one set covers both faces of that leaf. Non-glass alternatives with dummy function include the Cal-Royal BA40 and the Bravura Biloxi.
11) What is the closest solid brass dummy knob alternative to the Emtek Diamond crystal dummy set?
The Emtek Diamond dummy pair uses a brass substrate with a crystal knob and can be ordered with any brass rosette. For a solid brass dummy in a traditional metal knob instead of glass, Omnia offers the 434/0 egg-shaped single dummy interior lockset, the 442/00 single dummy knob latchset with a 2-5/8 inch rose, and the 458/0 single dummy knob latchset with a 2-3/8 inch backset, all in solid brass construction.
12) Is there a lower-cost builder-grade dummy knob than the Emtek Diamond crystal set for closet and pantry doors?
The Emtek Diamond dummy pair is a residential brass set with a crystal knob. For a plainer dummy knob on closet or pantry doors, the Cal-Royal BA40 is a dummy knob cylindrical lock in the Barrington BA series for doors 1-3/8 inch to 1-3/4 inch, and the Bravura Biloxi with round trim is a Grade 2 dummy knobset. Both use a metal knob rather than glass.
13) Which knob products look like a substitute for the Emtek Diamond dummy pair but are not?
Exit device and lock trim knobs are not interchangeable with the Emtek Diamond dummy pair, which mounts to the door face and needs no door prep. The Sargent 28C-KNOB is exit device trim with knob and rose in entrance function for 1-3/4 inch doors, the Sargent 78-2875 is an outside knob only in B design for the 7800 Series, and the Imperial USA ED-BKL580 is storeroom function knob trim in the ED-500 Series. Each of those mounts to a host device or lock chassis rather than standing alone as a dummy.
14) I need matching knobs across several interior doors in a rental unit. How does the Emtek Diamond dummy pair fit into that, and what else covers the other functions?
The Emtek Diamond crystal knob dummy pair covers non-operating doors such as closet and french door slabs, and comes in ten finishes including Satin Nickel US15, Oil Rubbed Bronze US10B, and Polished Chrome US26, with a choice of brass rosettes so the trim matches across a set. For the operating doors in the same unit, the Pamex FTF Baron family runs Grade 3 in passage, privacy, and entrance/office functions all for doors 1-3/8 inch to 1-3/4 inch, and the Dexter C2000 series covers Grade 2 passage, privacy, entry/office, and classroom on the same door thickness range.
15) What is the knob and rosette actually made of on the Emtek Diamond crystal knobset?
The knob is faceted glass in the Diamond pattern, and the base metal, including the rosette, is brass. That is why rosette choices are restricted to the brass rosette family rather than Emtek's other substrates.
16) Can I order an Emtek crystal dummy pair with a different finish on each side of the door?
Yes. A split finish can be requested when ordering, which is useful when a closet or double door faces two rooms with different hardware finishes. There is also a comments field for any special instruction on the set.
How fast can I get the Emtek 8050.CK.US15 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 8050.CK.US15 come with a warranty?
Absolutely. The Emtek 8050.CK.US15 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 8050.CK.US15?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Emtek 8050.CK.US15 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.