Emtek Classic Brass Leverset - Turino Lever, Dummy (Pair)

No door prep is needed. The Turino dummy pair is surface mount, so it fastens to the face of the door rather than dropping into a 2-1/8 inch cross bore like a functioning cylindrical lock. There is no latch and no spindle through the door. That makes it the usual choice for closet and pantry doors, French door inactive leaves, and any leaf that is held shut by a ball catch or roller catch instead of a latch.

1-3/8 to 1-3/4 inches, which covers standard interior residential doors at 1-3/8 and the heavier 1-3/4 inch leaf. Anything thicker than 1-3/4 inches falls outside the stated range.

Handing on the Turino dummy sets which way the lever curves, not any lock mechanism. Left Hand and Right Hand are the two choices. Stand outside the door: pick the hand so the lever sweeps down toward the latch edge the same way as the working levers on your other doors. Get it backwards and the lever points the wrong direction, which is purely cosmetic but obvious on a French door pair where both leaves are seen together.

A dummy has no latch and no working mechanism, it is trim only. For a door that needs to stay shut, order passage function. For a bath or bedroom that needs a push-button, order privacy. In a comparable decorative residential lever, the Baldwin Estate 5103 is offered in passage and privacy alongside its half dummy versions, so you can keep one lever design across a whole floor and change only the function per door.

That is one of its regular uses. Because it surface mounts and needs no door prep, it gives the inactive leaf of a French door pair matching lever trim on both faces without cutting a bore. The active leaf still needs a real latching or privacy lockset, and the inactive leaf still needs its own means of holding shut, typically flush bolts or a ball catch. The pair covers 1-3/8 to 1-3/4 inch leaves.

The Turino is a residential brass leverset. Where a Grade 1 ANSI/BHMA lever is written into the spec, the BEST 9K Series 1DT is a Grade 1 heavy duty single dummy trim lever, and for latching openings on the same spec the Falcon K101 is a Grade 1 heavy duty passage lock, fire rated, with non-handed levers and a 1-3/8 inch to 2-1/4 inch door thickness range. Corbin Russwin CL3110 is a Grade 1 vandal resistant passage/closet lever, fire rated, for 1-3/4 inch to 2 inch doors.

For a matched pair of non-functional levers on a door with no latch, the Emtek Turino dummy set is a brass residential lever pair. On the commercial side, the BEST 9K Series 1DT is a single dummy trim cylindrical lever lock in Grade 1 heavy duty, and the BEST 7KC Series 1DT is the same single dummy trim in Grade 2. Both BEST parts are single dummy trim, meaning one lever for one face of the door, so a double door or a two-sided application takes two of them where the Turino ships as a complete set covering both sides.

A dummy lever is fixed and operates nothing, so it will not work on a door with a latch. For a latching non-locking lever in a comparable decorative brass style, the Baldwin Estate 5103 is offered in a passage version with the 5048 rose. In commercial trim, the Accentra 5301LN Augusta is a Grade 2 cylindrical lever in passage/closet function and the Accentra 4601LN carries the same passage function in the 4600 Series. Falcon B101 is a Grade 2 medium duty passage lever with a non-handed design, which removes the left-hand and right-hand choice the Turino requires.

The Turino dummy pair is surface mounted and needs no door prep. Parts that read as similar levers but require a bored door and a latch include the Accentra 455LN Augusta, which is a Grade 1 heavy duty single dummy cylindrical lever lock, and Arrow GL01, a Grade 2 passage cylindrical lock with the Sierra lever for 1-3/4 inch to 2 inch doors. Deltana levers such as the 6201 Manchester and 6411 Morant are entry function for 1-3/8 inch to 2 inch doors and carry a keyed cylinder, so they are a different opening entirely.

A dummy lever has no locking mechanism and is non-keyed, so it will not secure a bathroom. For privacy function in a decorative lever, Baldwin Estate 5103 is offered as a privacy lever with the 5048 rose. Commercially, Hager 2540 is a Grade 2 privacy cylindrical lock with the Withnell lever for 1-3/8 to 2 inch doors, Kwikset 300BRNL RDT Breton is a Grade 3 privacy lever set for 1-3/8 to 1-3/4 inch doors, and Arrow MK02-TA is a fire rated privacy cylindrical lock with a Tudor knob rather than a lever.

The Emtek Turino dummy pair covers a 1-3/8 inch to 1-3/4 inch door thickness. Among latching levers in that same band, Cal-Royal AG05 is a Grade 2 storeroom lockset and Dexter C1000 Entry/Office is a Grade 1 clutching lever, both rated 1-3/8 inch to 1-3/4 inch. Corbin Russwin CL3110 and Arrow GL01 start at 1-3/4 inch, so they do not reach down to a 1-3/8 inch leaf.

It ships as a pair, a complete set with a lever and rosette for each face of the door. If you only need trim on one side, such as the closet-side face of a door where the other side is bare, a pair is more than you need. Accentra's 455LN Augusta and BEST's 9K Series 1DT are single dummy trims that cover the one-sided case in a commercial lever.

Yes, and it is part of the order. The Turino lever takes any of seven brass rosettes: #8, Oval, Quincy, Rectangular, Regular, Watford, and Wilshire. Choose the rosette that matches the working locksets already on the run so the dummy door does not read as an odd one out. The choice is trim shape only, it does not change how the dummy mounts.

Ten finishes: Flat Black (US19), French Antique (US7), Oil Rubbed Bronze (US10B), Pewter (US15A), Polished Brass Lifetime (US3), Polished Chrome (US26), Polished Nickel Lifetime (US14), Satin Brass (US4), Satin Nickel (US15), and Unlacquered Brass (US3NL). The two Lifetime finishes, polished brass and polished nickel, are the ones meant to hold their appearance. Unlacquered Brass US3NL is the opposite by design, it is bare brass that patinas with handling. Oil Rubbed Bronze and French Antique are living finishes that also change with wear.

Neither. The Turino dummy is non-keyed with no cylinder and no privacy turn. It is a pull, nothing more. If you want a keyed lever in a decorative residential style, the Deltana Manchester 6201 and Morant 6411 entry levers fit 1-3/8 to 2 inch doors, and the Callan Bennett is an entrance leverset supplied with a deadbolt combo.

The Turino dummy pair is ordered as Left Hand or Right Hand. Among other decorative dummy levers, Baldwin Estate 5103 is stocked as a left hand half dummy and as a right hand half dummy, each with the 5048 rose, so the handing is chosen at the part number rather than as an option. A half dummy covers one face of the door; the Turino is a pair covering both.

The Turino is a brass residential leverset ordered by finish, rosette and handing. Callan Bentley is a Grade 2 dummy lever, a single-configuration part in the Bentley series. BEST 7KC Series 1DT is a Grade 2 medium duty single dummy trim lever. Both reduce the order to one selection instead of the finish, rosette and handing combination the Turino uses, which matters when you are buying repeat quantities across a building.

The Turino is a brass residential lever in an American Classic style, so keeping a suite consistent means matching the trim family across functions. Baldwin Estate 5103 runs the same lever and 5048 rose through half dummy left hand, half dummy right hand, passage and privacy, which lets a decorative suite carry one lever shape across every door type. In commercial trim the same idea holds with BEST, where the 9K Series covers Grade 1 heavy duty dummy trim alongside the rest of the 9K line.

Brass, both as the material and the substrate, so the finish sits on brass rather than on a cast zinc core. That matters if you are specifying Unlacquered Brass and want the patina to develop on the base metal itself.