Emtek Crystal Knobsets - Old Town Knob, Dummy (Pair)
- Can be ordered with any Sandcast Bronze rosette
- Sold as complete set.
Specifications:
- Door Thickness: 1-3/8" to 1-3/4"
- Mount: Surface Mount (no door prep required)
- Material: Brass
Manufacturer Resources
Product Specs
- Collection:
- Glass & Porcelain
- Product Group:
- Mechanical Locks
- Product Subgroup:
- Bored Locksets
- Product Type:
- Knobsets
- Subcategory:
- Knobsets
- Commercial/Residential:
- Residential
- Keyed Function:
- Non-Keyed
- Keyed:
- No
- Handle Type:
- Knob
- Lock Function:
- Dummy
- Lock Type:
- Tubular
- Series:
- Old Town
- Theme:
- American Classic
- Electronic:
- No
- MAP Policy:
- Yes
- Product Function:
- Dummy
- Product Style:
- Glass
- Product Material:
- Brass
- Product Category:
- Mechanical Locks
- Product Substrate:
- Brass
- Department:
- Door Hardware
Emtek 7058.OT.FB – Frequently Asked Questions
1) Does the Emtek Old Town crystal dummy knob need a bore hole in the door?
No door prep is needed. The Old Town crystal dummy knob set is surface mount, so it screws to the face of the door with no 2-1/8 inch bore or latch bore required. That is what makes it the usual choice for closet, pantry and French door slabs that are already hung, or for the inactive leaf of a pair where nothing needs to latch.
2) Is the Emtek Old Town dummy knob sold as one knob or two?
Two. It is sold as a complete pair, one knob for each face of the door, so a single order covers both sides of a closet or French door. If you only need one side, a single dummy such as the Schlage A170 or the Omnia 434/0 covers that instead.
3) Will the Emtek Old Town crystal knob work on a 1-3/8 inch door?
Yes. The Old Town dummy pair covers 1-3/8 inch through 1-3/4 inch doors, which spans the common older interior slab at 1-3/8 and the standard 1-3/4 inch door.
4) Does this knob lock or latch at all?
It does neither. The Old Town crystal knob pair is a dummy: non-keyed, no latch, no privacy turn. It is a pull only. For a door that has to stay shut or lock, order a passage or privacy knob instead, for example the Dexter C2000 passage or privacy knob, both Grade 2 for 1-3/8 to 1-3/4 inch doors.
5) What do I have to specify when ordering the Emtek Old Town dummy knob?
Two choices. Rosette style, offered as #1, #2, #3, #4 and #6 sandcast bronze rosettes, and finish: Flat Black Bronze (FB), Medium Bronze (MB) or Tumbled White Bronze (TWB). Every rosette is available in all three finishes. There is also an optional split finish field if you want the two sides different.
6) I need the same knob look but the door has to latch - what should I order instead of a dummy?
The Emtek Old Town knob dummy pair has no latch and no keying; it is a pull only. For an opening that has to latch, passage function knobsets include the Omnia 434/PA latchset, the Baldwin Estate 5011 Colonial passage knob with 5058 rose, the Baldwin Estate 5000 Baltimore passage knob with a 2-3/8 inch backset and full lip strike, the Bravura Albany and Lynchburg Grade 2 passage knobsets, the Pamex FTF Baron Grade 3 passage knob, and the Kwikset 200P Polo passage knob with 6AL latch and round corner strike.
7) The bedroom and bath doors need a lock - what replaces the Old Town dummy there?
The Emtek Old Town crystal knob dummy pair is non-keyed with no locking function, so it does not suit a bed or bath door. Privacy knobs in the same handle style family include the Baldwin Estate 5077 Bethpage privacy knob with R027 rose, the Baldwin Estate 5000 Baltimore privacy knob with 5148 rose and 2-3/8 inch backset, the Deltana 6112 St. Thomas privacy knob for 1-3/8 to 2 inch doors, the Pamex FTF Baron Grade 3 privacy knob, the Cal-Royal BER20 Grade 3 privacy knob with brass trim, and the Dexter C2000 Grade 2 privacy ball knob.
8) Can I use the Emtek Old Town knob on a commercial corridor or classroom door?
The Emtek Old Town crystal knob dummy pair is a residential brass knobset with dummy function, so it carries no latch, no cylinder and no ANSI grade duty for a code-driven opening. For commercial door work, look at the Corbin Russwin CK4310 Grade 1 passage cylindrical lock for 1-3/8 to 2 inch doors, the Schlage D10S Grade 1 heavy duty passage knob lock, the Falcon X101 Grade 1 heavy duty passage knobset with fire rating and interchangeable core, the Sargent 8XG04 Grade 1 storeroom knob lock with 2-3/4 inch backset, or the Dexter C2000 Grade 2 classroom ball knob.
9) Is this Emtek crystal knob suitable for a commercial building?
It is a residential item. The Old Town crystal knob is a brass, glass-collection dummy with no ANSI grade behind it, aimed at homes and finished interiors. For commercial or MRO work where a grade matters, look at a graded dummy trim like the BEST 6K Series single dummy or the Schlage A170, both Grade 2.
10) Can I match Emtek Old Town crystal knobs to the working locksets on the other doors?
Yes, within the Emtek Old Town crystal line. The knob is part of Emtek's Glass and Porcelain collection in the American Classic theme, and the same sandcast bronze rosettes and the three bronze finishes (FB, MB, TWB) carry across, so a dummy on the closet can be matched to the hardware on adjacent doors with the same rosette number and finish.
11) Can Emtek Old Town dummy knobs replace an existing bored knob without patching the door?
Only partly. Because the dummy pair is surface mount, it will sit over the face of the door but it does not fill an existing 2-1/8 inch cross bore, and it brings no latch. If you are pulling out a working knob and want the hole covered, you need a bored dummy trim sized to that prep, such as the Schlage A170, or a functioning replacement lockset.
12) Which knobs look like a substitute for the Old Town dummy but are not?
Several knob items are not interchangeable with the Emtek Old Town crystal knob dummy pair. The Sargent 78-2875 outside knob only with B design and the Sargent 28C-KNOB exit device trim with knob and rose are exit device trim, not a standalone knob for a wood door. The Imperial USA ED-BKL580 knob trim is storeroom function exit trim as well. The Lockey 3830 is a mechanical keyless combination knob lock. And the Sure-Loc Bergen round knob 6-pack with adjustable backset is a bored knobset requiring a prepped door, where the Emtek Old Town is surface mount with no door prep required.
13) I want a solid brass knob in a traditional look but a simpler single dummy - what are the options?
The Emtek Old Town knob dummy pair is brass with a glass knob in an American Classic theme and ships as a pair. If you only need one face covered, the Omnia 434/0 traditional egg-shaped single dummy and the Omnia 442/00 #44 traditional single dummy with 2-5/8 inch rose are both solid brass construction, and the Omnia 458/0 traditional single dummy latchset is solid brass with a 2-3/8 inch backset. The Bravura Biloxi with round trim is a Grade 2 dummy knobset if you want a round trim plate instead of a selectable rosette.
14) What keyed entry knob pairs with the Old Town dummy on the same house?
The Emtek Old Town crystal knob dummy pair is non-keyed, so an exterior or lockable opening needs a separate keyed set. Keyed knob options include the Deltana 3381 Egg Knob entry and Deltana 6171 Round Knob entry, both for 1-3/8 to 2 inch doors, the Deltana 6901 Portland Knob entry for 1-3/8 to 1-3/4 inch doors, the Kwikset 400P-CP Polo keyed entry knob, Grade 3, for 1-3/8 to 1-3/4 inch doors, the Cal-Royal BER00 Grade 3 entrance knob with Kwikset keyway, and the Dexter C2000 Grade 2 entry/office ball knob.
15) Do the alternatives cover the same 1-3/8 to 1-3/4 inch door thickness as the Emtek Old Town dummy?
The Emtek Old Town crystal knob dummy pair fits doors 1-3/8 inch to 1-3/4 inch. Among the alternatives, the Cal-Royal BA40 dummy knob, the Arrow MK01 and RK01 Grade 2 passage knobs, the Corbin Russwin CK4410 Grade 2 passage knob, the Dexter C2000 passage ball knob, and the Pamex FTF Baron series all list the same 1-3/8 to 1-3/4 inch range. If your door is thicker, the Corbin Russwin CK4310 Grade 1 passage knob goes to 2 inches and the Falcon X101 Grade 1 passage knobset goes to 2-1/4 inches.
16) What is a dummy knob actually used for on a French or double door?
On a pair of French doors the active leaf carries the working lockset and the inactive leaf takes a dummy. The Emtek Old Town crystal pair gives you a knob on both faces of that inactive leaf purely to push and pull, with nothing to turn or retract. Same story on bifolds, pantries and reach-in closets held shut by a ball catch or magnetic catch.
How fast can I get the Emtek 7058.OT.FB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 7058.OT.FB come with a warranty?
Absolutely. The Emtek 7058.OT.FB is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 7058.OT.FB?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Emtek 7058.OT.FB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.