Emtek Designer Brass Crystal Knobsets - Georgetown Knob, Passage Set
- Can be ordered with any Brass rosette
- Sold as complete set. Includes Latch and Strike Plate
- 28 Degree Latch (included when CF Mechanism is selected)
- Fits any door between 1-3/8” to 2-1/4" thick with a 2-1/8" bore standard door prep*
- Standard latch is for 2-3/8" backset. Specify 2-3/4" backset if required
* STRETTO rosette requires a 1-1/4” diameter bore hole and 2-hole door preparation for thumbturn privacy
Specifications:
- Backset: Adjustable 2-3/8" or 2-3/4"
- Cross Bore: 2-1/8"
- Door Thickness: 1-3/8" to 1-3/4"
- Latch Faceplate: Round or Square Corner
- Material: Brass
Manufacturer Resources
Product Specs
- Subcategory:
- Knobsets
- Collection:
- Glass & Porcelain
- Product Type:
- Knobsets
- Product Group:
- Mechanical Locks
- Product Subgroup:
- Bored Locksets
- Commercial/Residential:
- Residential
- Handle Type:
- Knob
- Lock Type:
- Tubular
- Series:
- Georgetown
- Theme:
- American Designer
- Electronic:
- No
- Keyed Function:
- Non-Keyed
- Keyed:
- No
- Lock Function:
- Passage
- MAP Policy:
- Yes
- Product Function:
- Passage
- Product Style:
- Glass
- Product Material:
- Brass
- Product Category:
- Mechanical Locks
- Product Substrate:
- Brass
- Department:
- Door Hardware
Emtek 8107.GT.US15 – Frequently Asked Questions
1) Will the Emtek Georgetown crystal knob fit my existing door prep?
If the door has the standard 2-1/8 inch cross bore, yes. The Georgetown passage knobset drops into that standard prep and the standard latch is set up for a 2-3/8 inch backset, with a 2-3/4 inch backset available if your bore sits further from the edge. One exception to watch: the STRETTO rosette needs a 1-1/4 inch diameter bore and a two-hole prep for thumbturn privacy, so it is not a straight drop-in on a normal knob prep.
2) What door thickness does the Emtek Georgetown passage knob work on?
Emtek lists the Georgetown knobset for doors 1-3/8 to 1-3/4 inches in the specification table, and notes the set fits any door from 1-3/8 to 2-1/4 inches with the standard 2-1/8 inch bore prep. If your door is thicker than a standard 1-3/4 inch slab, enter the actual thickness in the Door Thickness field when you order so the spindle and screws are sized for it.
3) Does the Georgetown passage set lock, or is it just a latch?
Passage only. The Georgetown crystal knobset is a non-keyed tubular latch set with no cylinder and no thumbturn, so both knobs always turn. That makes it right for hallways, closets and pantry doors. For a bedroom or bath you want a privacy function instead, and for an exterior or office door a keyed entry set.
4) Can I use this Emtek crystal knob on a commercial corridor or office door?
No. The Georgetown crystal knobset is a residential-duty decorative set with a glass knob, with no ANSI grade or fire rating behind it. For a commercial passage opening look at graded cylindrical knob locks instead: the Corbin Russwin CK4310 is Grade 1 passage for 1-3/8 to 2 inch doors, the Schlage D10S is Grade 1 heavy duty passage, and the Falcon W101 is a Grade 2 fire rated passage knob lock with a 2-3/4 inch backset.
5) Which backset do I order for the Emtek Georgetown knob?
Backset is a required choice, 2-3/8 or 2-3/4 inches. Measure from the door edge to the center of the 2-1/8 inch bore. Most interior residential doors are 2-3/8; 2-3/4 shows up on heavier or commercially prepped doors. The standard latch supplied is the 2-3/8 inch one, so the longer backset has to be specified.
6) What is a comparable decorative brass passage knob to the Emtek Georgetown crystal knob passage set?
For a similarly decorative, residential-style brass passage knob, the Omnia 434/PA is a traditional egg-shaped knob latchset in solid brass with a passage/hall/closet function, and the Baldwin Estate 5011 Colonial passage knob with 5058 rose is another passage-function knob in the decorative vein. The Emtek Georgetown differs in that it is a glass and porcelain collection knob on a brass substrate, and the knob can be ordered with the Lancaster, Ribbon and Reed, or Rope rosette.
7) I need a lock for a bedroom or bath, not a passage knob - what takes the place of the Emtek Georgetown passage set?
The Georgetown passage set is non-keyed passage function, so it has no locking mechanism. For bed and bath openings, the Baldwin Estate 5077 Bethpage privacy knob with R027 rose and the Deltana 6112 St. Thomas privacy knob are privacy-function knobs in the decorative range, and the Deltana fits doors 1-3/8 inch to 2 inch. On the commercial side the Dexter C2000 privacy ball knob is a Grade 2 option for 1-3/8 inch to 1-3/4 inch doors.
8) Is a dummy knob the same thing as the Emtek Georgetown passage set?
No. The Georgetown passage set has a working latch and is sold complete with latch and strike plate, so the knob turns and retracts the bolt. A dummy trim such as the Schlage A170 single dummy, the BEST 6K single dummy trim, or the Omnia 458/0 single dummy latchset is surface-mounted trim with no latch action, used on inactive leaves and closet doors that are held by a catch.
9) My door is 2 inches thick - will the Emtek Georgetown knob work, or do I need something else?
The Emtek Georgetown knob passage set fits doors from 1-3/8 inch to 2-1/4 inch thick with a 2-1/8 inch bore standard door prep, so a 2 inch door is within range. If you are cross-shopping, the Corbin Russwin CK4310 passage lock covers 1-3/8 inch to 2 inch and the Falcon X101 passage knobset covers 1-3/8 inch to 2-1/4 inch, while the Arrow MK01 and Dexter C2000 passage knobs stop at 1-3/4 inch.
10) What comes in the box with the Emtek Georgetown knobset?
It ships as a complete set: both crystal knobs, the rosettes you select, the latch, and the strike plate. The latch faceplate is available with round or square corners so it can match the existing mortise in the door edge. Nothing else is required to hang it on a pre-bored door.
11) What is the CF mechanism option on Emtek knobsets and should I pick it?
CF gives you rosettes with no exposed screws, so the trim reads clean from the room side. Choosing CF also brings the 28 degree rotation latch with it. The alternatives are the standard latch or the 28 degree rotation latch on its own with conventional screw-through rosettes. The 28 degree latch needs less knob rotation to retract, which is easier on a glass knob you turn with two fingers.
12) Which rosettes and finishes can I get with the Georgetown crystal knob?
Three rosette patterns are offered: Lancaster, Ribbon and Reed, and Rope. Finishes run French Antique (US7), Oil Rubbed Bronze (US10B), Pewter (US15A), Polished Brass Lifetime (US3), Polished Chrome (US26), Satin Nickel (US15), and Unlacquered Brass (US3NL). The metal parts are brass. If you want the knob and rosette in different finishes there is a split finish field on the order.
13) I need a decorative solid brass passage knob but not glass. What else is there?
Stay in the decorative residential range rather than the commercial lines. The Baldwin Estate 5011 Colonial passage knob with 5058 rose and the Baldwin Estate 5000 Baltimore passage set (2-3/8 inch backset, full lip strike) are both traditional metal knobs in passage function. The Omnia 434/PA is a solid brass egg-shaped passage latchset with a 3 inch projection. All are passage function like the Georgetown, just without the crystal.
14) Can I match this Georgetown crystal knob on bedroom and bath doors too?
You would need the privacy version of the same Emtek crystal knob family for those openings, since the Georgetown passage set has no locking mechanism at all. The same rosette patterns (Lancaster, Ribbon and Reed, Rope) and the same brass finish range carry across the Glass and Porcelain collection, so hall and closet doors in passage will match bed and bath doors in privacy on one floor.
15) What is a simpler passage knob if I do not need the crystal knob look?
For a plain passage knob, the Kwikset 200P Polo passage knob ships with a 6AL latch and RCS round corner strike, the Pamex FTF Baron is a Grade 3 passage knob lockset for 1-3/8 inch to 1-3/4 inch doors, and the Bravura Albany round trim passage knobset is Grade 2. The Emtek Georgetown differs by being a brass-substrate glass knob offered in seven finishes including Oil Rubbed Bronze US10B and Unlacquered Brass US3NL.
16) I need a keyed exterior knob instead of the Emtek Georgetown passage set - what are my options?
The Georgetown passage set is non-keyed, so it will not secure an exterior door. Keyed alternatives include the Deltana 6901 Portland knob entry for 1-3/8 inch to 1-3/4 inch doors, the Deltana 3381 Egg knob entry for 1-3/8 inch to 2 inch doors, the Baldwin Estate 5000 Baltimore knob, and for commercial use the BEST 8K single cylinder entrance knob lock, which is Grade 1 heavy duty.
17) I am buying passage knobs in quantity for an apartment turn - what else besides the Emtek Georgetown should I look at?
The Emtek Georgetown knob is a brass glass-knob set ordered one at a time with a choice of backset and rosette. For volume interior work, the Sure-Loc Bergen round knob ships as a 6-pack with adjustable backset, the Schlage Residential F500 Plymouth with Georgian knob is a combo pack with adjustable backsets and dual strikes for 1-3/8 inch to 1-3/4 inch doors, and the Pamex FTF Baron passage knob is a Grade 3 set for the same thickness range.
18) What is the difference between the Emtek Georgetown passage knob and the Baldwin Estate 5000 Baltimore passage set?
Both are passage-function knobs. The Baldwin Estate 5000 Baltimore is a preconfigured 2 inch knob with the 5048 rose, a 2-3/8 inch backset, and a full lip strike. The Emtek Georgetown is ordered with your choice of 2-3/8 inch or 2-3/4 inch backset, a Lancaster, Ribbon and Reed, or Rope rosette, and a standard latch, 28 degree rotation latch, or CF mechanism that leaves no exposed screws on the rosettes.
How fast can I get the Emtek 8107.GT.US15 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 8107.GT.US15 come with a warranty?
Absolutely. The Emtek 8107.GT.US15 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 8107.GT.US15?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Emtek 8107.GT.US15 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.