Emtek Designer Brass Crystal Knobsets - Hampton Knob, Privacy Set
- Can be ordered with any Brass rosette
- Sold as complete set. Includes Latch and Strike Plate
- 28 Degree Latch (included when CF Mechanism is selected)
- Fits any door between 1-3/8” to 2-1/4" thick with a 2-1/8" bore standard door prep*
- Standard latch is for 2-3/8" backset. Specify 2-3/4" backset if required
* STRETTO rosette requires a 1-1/4” diameter bore hole and 2-hole door preparation for thumbturn privacy
Specifications:
- Backset: Adjustable 2-3/8" or 2-3/4"
- Cross Bore: 2-1/8"
- Door Thickness: 1-3/8" to 1-3/4"
- Latch Faceplate: Round or Square Corner
- Material: Brass
Manufacturer Resources
Product Specs
- Collection:
- Glass & Porcelain
- Product Type:
- Knobsets
- Product Group:
- Mechanical Locks
- Product Subgroup:
- Bored Locksets
- Subcategory:
- Knobsets
- Commercial/Residential:
- Residential
- Handle Type:
- Knob
- Lock Function:
- Privacy/Bed/Bath
- Lock Type:
- Tubular
- Series:
- Hampton
- Theme:
- American Designer
- Electronic:
- No
- Keyed:
- No
- Keyed Function:
- Non-Keyed
- MAP Policy:
- Yes
- Product Function:
- Privacy/Bed/Bath
- Product Style:
- Glass
- Product Material:
- Brass
- Product Category:
- Mechanical Locks
- Product Substrate:
- Brass
- Department:
- Door Hardware
Emtek 8207.HT.US15 – Frequently Asked Questions
1) Will the Emtek Hampton crystal privacy knob fit my existing 2-1/8 inch bored door?
Yes. The Hampton knob privacy set drops into a standard 2-1/8 inch cross bore prep, and the latch is adjustable for either a 2-3/8 inch or 2-3/4 inch backset. Pick the backset that matches your existing latch hole when you order. One exception: with a STRETTO rosette you need a 1-1/4 inch diameter bore and a 2-hole prep for the thumbturn, so that combination is not a straight drop-in on a standard single-bore door.
2) What door thickness does the Emtek Hampton privacy knobset work on?
The Hampton privacy knob set covers doors from 1-3/8 to 1-3/4 inches with the standard latch, and Emtek states the set can be ordered for doors up to 2-1/4 inches thick on a 2-1/8 inch bore prep. If your door is thicker than 1-3/4 inches, enter the actual thickness in the Door Thickness field on the order so the spindle and screws are sized to it.
3) Is this a bed and bath lock, and does it take a key?
It's a privacy function set, the bed and bath type: thumbturn inside, no cylinder and no key on either side. Non-keyed throughout, so it is not the right choice for an exterior door or anything you need to lock from the hall.
4) What is the difference between the standard latch, the 28 degree latch, and the CF mechanism on the Emtek Hampton knob?
Three choices. Standard latch is the conventional rotation. The 28 Degree Rotation Latch reduces how far the knob has to turn to retract the bolt, which suits crystal knobs that are harder to grip and turn far. The CF Mechanism gives you rosettes with no exposed screws for a clean face, and it includes the 28 degree latch. If the look of a screwless rose matters, choose CF.
5) Is the Emtek Hampton crystal knob suitable for a commercial corridor or high-traffic building?
No. Emtek lists the Hampton crystal knobset as residential, a tubular bored lock in brass with a glass knob. For an office corridor, school, or apartment common area you want a cylindrical commercial lock instead, for example the Schlage D10S Grade 1 passage knob or the Corbin Russwin CK4310 Grade 1, or a Grade 2 like the Dexter C2000 privacy knob if privacy function is what you need.
6) What is a comparable decorative privacy knob to the Emtek Hampton crystal knob privacy set?
The Baldwin Estate 5077 Bethpage privacy knob with R027 rose is a decorative privacy knob in the same vein, and the Deltana 6112 St. Thomas knob privacy set is another, rated for doors 1-3/8 inch to 2 inch thick. The Emtek Hampton privacy set differs in that the knob is glass crystal on a brass base and the rosette is selectable as Lancaster, Ribbon & Reed or Rope.
7) I need a lower-cost privacy knob for a rental bedroom door instead of the Emtek Hampton crystal knob - what works?
For a plain utility privacy knob, the Pamex FTF Baron knob lockset in privacy function is Grade 3 and fits doors 1-3/8 inch to 1-3/4 inch, as does the Cal-Royal BER20 Grade 3 privacy knob with brass trim. The Dexter C2000 privacy ball knob is Grade 2 for the same door thickness range. All three are painted or plated metal knobs rather than the glass crystal knob on a brass rosette that the Emtek Hampton privacy set uses.
8) The Emtek Hampton crystal privacy knob is residential - what should I use on a commercial bed/bath or office door instead?
The Emtek Hampton privacy set is designated residential. For graded commercial cylindrical knob locks, the Dexter C2000 privacy ball knob is Grade 2 for doors 1-3/8 inch to 1-3/4 inch, the Corbin Russwin CK4310 Global knob is Grade 1 non-keyed for doors up to 2 inch, and the Falcon W101 Grade 2 knob lock is fire rated with a 2-3/4 inch backset.
9) Which knobsets look like a substitute for the Emtek Hampton privacy set but will not lock a bathroom door?
Watch the function. The Baldwin Estate 5000 Baltimore knob with 5048 rose and the Baldwin 5011 Colonial knob are passage sets, and the Omnia 434/PA egg knob is a passage latchset - none of them lock. The Omnia 434/0, Omnia 442/00, Omnia 458/0, BEST 6K single dummy trim and Bravura Biloxi are dummy knobs with no latch at all. The Emtek Hampton set is a privacy/bed/bath function with a thumbturn.
10) My door is thicker than 1-3/4 inch - is the Emtek Hampton crystal privacy knob still the right pick, or is there an alternative?
The Emtek Hampton privacy set fits doors 1-3/8 inch to 2-1/4 inch thick with a 2-1/8 inch bore, so thick doors are within its range. If a graded commercial lock is needed on a thick door instead, the Falcon X101 Grade 1 passage knobset covers 1-3/8 inch to 2-1/4 inch, and the Corbin Russwin CK4851 entrance/office knob covers 1-3/8 inch to 2 inch.
11) What comes in the box with the Emtek Hampton knob set, and do I need to buy a strike separately?
It ships as a complete set, both knobs, rosettes, the latch, and the strike plate. Nothing else is required for a standard bored door. The latch faceplate is available in round corner or square corner, so match it to the mortise already cut in your door edge.
12) Which rosettes and finishes can I get the Hampton crystal knob in?
Rosette choices are Lancaster, Ribbon and Reed, and Rope, and Emtek notes the knob can be ordered with any brass rosette. Finishes run French Antique (US7), Oil Rubbed Bronze (US10B), Pewter (US15A), Polished Brass Lifetime (US3), Polished Chrome (US26), Satin Nickel (US15), and Unlacquered Brass (US3NL). Unlacquered brass will patina over time, the Lifetime polished brass will not. There is also a split finish field if you want a different finish inside and out.
13) Can I match crystal knobs across a whole house or a renovation and keep the same hardware on other doors?
Yes, within the brass rosette range. The Hampton crystal knob is part of Emtek's Glass and Porcelain collection with solid brass rosettes and trim, so you can run the same rosette and finish on passage, privacy, and dummy openings and keep one look through a floor. Specify the same rosette and the same US finish code on each opening.
14) What is a comparable decorative privacy knob if I want a brass rose look but not a glass knob?
Two close alternatives in the same decorative privacy category: the Baldwin Estate 5077 Bethpage privacy knob with R027 rose, and the Deltana 6112 St. Thomas privacy knob, which covers 1-3/8 to 2 inch doors. Baldwin's preconfigured 5000 Baltimore privacy set comes set up with a 2-3/8 inch backset and a full lip strike if you want it out of the box with no options to pick.
15) I need a budget privacy knob for rental bedrooms, is the Emtek Hampton the right pick?
For a rental turnover on a budget, probably not, the Hampton is a decorative brass and glass residential set. A plainer privacy knob will do the job for less fuss: the Pamex FTF Baron privacy knob or the Cal-Royal BER20 privacy knob, both Grade 3 and both covering 1-3/8 to 1-3/4 inch doors. Use the Emtek where the look is the point.
16) If the door needs a key rather than a privacy thumbturn, what replaces the Emtek Hampton crystal knob privacy set?
The Emtek Hampton crystal knob privacy set is non-keyed. For a keyed knob on the same style of bored door prep, the Deltana 3381 Egg knob entry and Deltana 6171 Round knob entry cover doors 1-3/8 inch to 2 inch, the Kwikset 400P-CP Polo keyed entry knob is Grade 3 for 1-3/8 inch to 1-3/4 inch doors, and the Cal-Royal BER00 entrance/office knob is Grade 3 with a Kwikset keyway.
17) For a closet or hall door next to a bedroom using the Emtek Hampton crystal knob, what non-locking option matches the opening?
A passage knob suits a hall or closet where no lock is wanted. The Arrow MK01 and Arrow RK01 are Grade 2 passage cylindrical knobs for doors 1-3/8 inch to 1-3/4 inch, the Pamex FTF Baron passage knob is Grade 3 for the same range, and the Schlage D10S Orbit knob is a Grade 1 heavy duty passage latch. The Emtek Hampton set itself is built as a privacy/bed/bath function.
18) I need to outfit several bedroom doors at once - how does the Emtek Hampton crystal privacy knob compare to a multi-pack option?
The Emtek Hampton privacy set is ordered as a complete set per door, with the finish, rosette and latch selected individually and a 2-3/8 inch or 2-3/4 inch backset specified. If uniform builder-grade hardware across several doors is the goal, the Sure-Loc Bergen round knob is offered as a 6-pack with adjustable backset, and the Schlage Residential F500 Plymouth with Georgian knob is a combo pack with adjustable backsets and dual strikes for doors 1-3/8 inch to 1-3/4 inch.
19) Does handing matter when ordering the Emtek Hampton privacy knobset?
No handing to specify. It's a bored tubular privacy set with knobs both sides and a reversible-style latch, so what you do have to specify is the backset, 2-3/8 or 2-3/4 inch, the rosette, the finish, and the latch mechanism. Door thickness only needs entering if the door is over 1-3/4 inches.
How fast can I get the Emtek 8207.HT.US15 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 8207.HT.US15 come with a warranty?
Absolutely. The Emtek 8207.HT.US15 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 8207.HT.US15?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Emtek 8207.HT.US15 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.