Emtek Designer Brass Leverset ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$240.00
$196.36
Emtek Emtek Designer Brass Leverset - Santa Fe Lever, Passage Set EMTEK-DESIGNER-LEVERSETS-SANTA-FE-PASSAGE

Emtek Designer Brass Leverset - Santa Fe Lever, Passage Set

(No reviews yet) Write a Review

Model: 8100.SF.RH.US15
From the Brass Collection
$240.00
$196.36
Selected Latch is
Selected Rosette is
Selected Handing is
Selected Finish is
Selected Backset is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$240.00
$196.36
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Emtek Designer Brass Leverset - Santa Fe Lever, Passage Set

  • Can be ordered with any Brass rosette
  • Sold as complete set. Includes Latch and Strike Plate
  • 28 Degree Latch (included when CF Mechanism is selected)

- Fits any door between 1-3/8” to 2-1/4" thick with a 2-1/8" bore standard door prep*
- Standard latch is for 2-3/8" backset. Specify 2-3/4" backset if required


* STRETTO rosette requires a 1-1/4” diameter bore hole and 2-hole door preparation for thumbturn privacy


 

Specifications:

  • Backset: Adjustable 2-3/8" or 2-3/4"
  • Cross Bore: 2-1/8"
  • Door Thickness: 1-3/8" to 1-3/4"
  • Latch Faceplate: Round or Square Corner
  • Material: Brass

Product Specs

Subcategory:
Leversets
Collection:
Brass
Product Type:
Leversets
Product Group:
Mechanical Locks
Product Subgroup:
Bored Locksets
Commercial/Residential:
Residential
Handle Type:
Lever
Lock Type:
Tubular
Series:
Santa Fe
Theme:
American Designer
Electronic:
No
Keyed Function:
Non-Keyed
Keyed:
No
Lock Function:
Passage
Product Attribute:
Cylindrical Locks
MAP Policy:
Yes
Product Function:
Passage/Hall/Closet
Product Style:
American Designer
Product Material:
Brass
Product Category:
Mechanical Locks
Product Substrate:
Brass
Department:
Door Hardware

Emtek 8100.SF.RH.US15 – Frequently Asked Questions

1) Will the Emtek Santa Fe passage leverset fit a 1-3/4 inch door with a standard 2-1/8 inch bore?
Yes. The Santa Fe passage lever mounts in a standard 2-1/8 inch cross bore and covers doors from 1-3/8 inch up to 2-1/4 inch thick, so a typical 1-3/4 inch interior door is right in the middle of the range. There is a door thickness field on the order, so state the actual thickness if it is anything other than 1-3/4 inch. One exception worth knowing: the STRETTO rosette needs a 1-1/4 inch diameter bore and a two-hole prep, so it is not a drop-in on a standard 2-1/8 inch prep.
2) What backset do I need to order for an Emtek Santa Fe passage lever?
Backset is a required choice, 2-3/8 inch or 2-3/4 inch. Measure from the door edge to the center of the bore: 2-3/8 inch is the usual residential prep, 2-3/4 inch turns up on heavier or commercial-prepped doors. The standard latch ships 2-3/8 inch, so the 2-3/4 inch has to be called out at order time.
3) Does a passage lever lock, or does it just latch?
It does not lock. The Santa Fe passage set is non-keyed with no thumbturn or pushbutton, so the lever always retracts the latch from either side. That is what you want on a hall, closet, pantry, or laundry door. For a bedroom or bath you need a privacy set with a thumbturn, and for a keyed opening an entry set.
4) Do I have to specify handing on the Emtek Santa Fe lever?
Yes, left hand or right hand, and it matters. The Santa Fe is a shaped lever, so the handing sets which way it curves when the door faces you. Stand outside the door: if the hinges are on your left it is left hand, hinges on the right is right hand. Getting it backwards puts the lever tail pointing the wrong direction.
5) What comes in the box with the Emtek Santa Fe passage set, and what else do I need to buy?
It is a complete set: both levers, the rosettes you pick, the latch, and the strike plate. Nothing extra is needed to hang it on an existing bored door. You still choose the rosette style and the latch type, and the latch faceplate comes round corner or square corner, so match that to the mortise already cut in your door edge.
6) Is the Emtek Santa Fe lever suitable for a commercial building or an apartment turn?
It is a residential-rated solid brass tubular lockset, not a Grade 1 or Grade 2 commercial cylindrical lock. For a corridor, school, or MRO opening that needs a graded passage lever, look at the Falcon K101 Grade 1 passage lock or the Corbin Russwin CL3110 Grade 1 passage/closet lever, both Grade 1 with a fire rating on record. The Santa Fe belongs on interior doors in homes, model units, and hospitality guest rooms where the look drives the choice.
7) What is the closest equivalent to the Emtek Santa Fe passage leverset if I want the same decorative brass look from another brand?
The Baldwin Estate 5103 passage lever with the 5048 rose is the closest decorative peer - it is a passage function lever set in the same residential decorative style. The Santa Fe passage set is a brass leverset with passage function, ordered with any brass rosette and sold complete with latch and strike plate. Where the two differ is in trim choice: the Santa Fe takes ten rosette designs including #8, Lancaster, Oval, Quincy, Rectangular, Regular, Ribbon & Reed, Rope, Watford and Wilshire, while the Baldwin 5103 passage is built around the 5048 rose.
8) I need a passage lever for a commercial corridor with heavy traffic - is the Emtek Santa Fe the right choice or should I use something else?
Use a commercial-rated passage lever instead. The Santa Fe brass leverset is classified residential. For heavy-traffic openings, the Falcon K101 is a Grade 1 heavy duty passage cylindrical lock with non-handed levers and a fire rating, covering doors 1-3/8 inch to 2-1/4 inch thick, and the Corbin Russwin CL3110 is a Grade 1 vandal resistant passage/closet lever lock, fire rated, for 1-3/4 inch to 2 inch doors. The Falcon T101 is another Grade 1 heavy duty passage lever, in the T Series.
9) Which lever should I order instead of the Emtek Santa Fe passage set for a bedroom or bathroom door that needs to lock?
A passage set has no locking function - the Santa Fe Santa Fe leverset is non-keyed passage. For a bed or bath opening, the Baldwin Estate 5103 privacy lever with the 5048 rose is the matching decorative privacy option, and the Kwikset 300BRNL RDT Breton privacy lever set is a Grade 3 privacy lever for doors 1-3/8 inch to 1-3/4 inch. The Hager 2540 is a Grade 2 privacy cylindrical lock with the Withnell lever for 1-3/8 inch to 2 inch doors.
10) Is a dummy lever the same as the Emtek Santa Fe passage set?
No. The Santa Fe passage set is a working latching set, sold complete with latch and strike plate, with a 28 degree rotation latch, standard latch or CF mechanism latch option. A dummy is surface-mounted trim with no latch at all - the Baldwin Estate 5103 half dummy is offered as separate left hand and right hand versions, and the BEST 7KC single dummy trim lever is a Grade 2 non-keyed medium duty dummy. Order a dummy only for a fixed or inactive leaf; for a door that latches, the passage set is the one.
11) My door is 2 inches thick - what passage lever works if the Emtek Santa Fe does not?
The Santa Fe brass leverset lists a door thickness of 1-3/8 inch to 1-3/4 inch. For a 2 inch door, the Hager 2510 is a Grade 2 passage cylindrical lever with the Withnell design covering 1-3/8 inch to 2 inch, the Arrow GL01 is a Grade 2 passage cylindrical lock with the Sierra lever for 1-3/4 inch to 2 inch, and the Falcon K101 Grade 1 passage lock covers 1-3/8 inch to 2-1/4 inch.
12) Can I use the Emtek Santa Fe passage lever on an exterior or office door that needs a key?
No - the Santa Fe is non-keyed with passage function, so it latches but never locks. For a keyed opening, the Hager 2525 is a Grade 2 commercial cylindrical entry lock with a lever handle for 1-3/8 inch to 2 inch doors, the Cal-Royal AG00 is a Grade 2 entrance lever with a 6-pin Schlage C keyway keyed different on a 2-3/8 inch backset for 1-3/8 inch to 1-3/4 inch doors, and the Dexter C1000 is a Grade 1 keyed entry/office clutching lever for 1-3/8 inch to 1-3/4 inch doors.
13) What is the CF mechanism option on Emtek levers, and should I pick it?
CF means the rosettes mount with no exposed screws, so you get a clean face on the trim instead of two visible fasteners. Choosing CF also brings the 28 degree rotation latch with it. If exposed screws do not bother you, the standard latch option is the simpler order. The 28 degree latch can also be selected on its own without CF.
14) Can I match the Santa Fe lever to the rosette style already on my other doors?
The Santa Fe lever can be ordered on any of ten brass rosettes: #8, Lancaster, Oval, Quincy, Rectangular, Regular, Ribbon and Reed, Rope, Watford and Wilshire. That is the point of the Emtek designer brass program, you pick lever and rose separately, so a house already running Rope or Wilshire roses can keep the same rose and change the lever.
15) What finishes does the Emtek Santa Fe brass lever come in, and can I mix them?
Seven finishes: French Antique (US7), Oil Rubbed Bronze (US10B), Pewter (US15A), Polished Brass Lifetime (US3), Polished Chrome (US26), Satin Nickel (US15), and Unlacquered Brass (US3NL). There is also a split finish field on the order, so you can run one finish on the hall side and another on the room side of the same door. Note Unlacquered Brass has no clear coat and will patina with handling, and Oil Rubbed Bronze is a living finish too.
16) I need matching privacy levers for the bedrooms and dummy levers on the closet pair. Does the Santa Fe passage set cover that?
No. The Santa Fe passage set only handles hall, closet, and pantry doors that never need to lock. Bedrooms and baths need the Santa Fe privacy version with a thumbturn, and a non-operating door such as one leaf of a closet pair needs a dummy. Order the same lever and rosette in the same finish across those functions and the openings match. If you want a single-brand run in another line, the Baldwin Estate 5103 exists in passage, privacy, and both left and right half dummy.
17) Will the Emtek Santa Fe latch drop into the existing mortise and strike on my door?
Usually yes on a residential door already bored 2-1/8 inch with a 2-3/8 or 2-3/4 inch backset. Two things to check on the edge: the faceplate corner, round or square, needs to match the existing mortise, and the set ships with its own strike plate, so if you are keeping the old strike make sure the new one is not needed. If the existing prep is a 1-1/4 inch two-hole layout, that is the STRETTO rosette prep, not the standard one.
18) What is a simpler passage lever than the Emtek Santa Fe for rental unit closet and hall doors?
The Kwikset 200BRNL RDT Breton passage lever set is a Grade 3 passage/hall/closet lever for doors 1-3/8 inch to 1-3/4 inch, and the Callan Asheville CLN-AH5011 is a Grade 3 passage leverset in satin nickel. Both are single-configuration passage sets. The Santa Fe is a brass passage leverset ordered by finish, rosette, handing and latch type, with backset selected as 2-3/8 inch or 2-3/4 inch, so it is specified rather than picked off a shelf.
19) The Emtek Santa Fe passage lever is handed - what passage lever can I use if I do not want to track left and right hand on a multi-door order?
The Santa Fe passage set is ordered left hand or right hand. If you would rather not hand each opening, the Falcon B101 is a Grade 2 medium duty passage cylindrical lever with a non-handed design, and the Falcon K101 is a Grade 1 heavy duty passage lock with non-handed levers. Both are single-part orders across a run of doors, where the Santa Fe is specified per opening by hand along with finish and rosette.
20) Which passage lever should I standardize on across a facility instead of the Emtek Santa Fe?
For a facility standard, pick a graded commercial series that runs across functions. The Accentra Augusta line offers the 5301LN Grade 2 passage in the 5300 Series alongside the 455LN Grade 1 Augusta single dummy in the 5400 Series, so trim stays consistent between latching and inactive doors. Design Hardware pairs the J75 Grade 2 and X75 Grade 1 passage levers in the same flat lever design for 1-3/4 inch doors. The Santa Fe is a residential brass leverset specified by finish, rosette and handing per opening.
21) What decorative lever alternatives to the Emtek Santa Fe come in a solid brass finish range?
Within the decorative lever group, the Deltana 6201 Manchester, 6411 Morant and 6431 Linstead are entry function levers covering doors 1-3/8 inch to 2 inch, and the Bravura Miramar with round trim is a Grade 2 passage leverset in US4 satin brass. The Santa Fe is a brass passage leverset offered in French Antique (US7), Oil Rubbed Bronze (US10B), Pewter (US15A), Polished Brass - Lifetime (US3), Polished Chrome (US26), Satin Nickel (US15) and Unlacquered Brass (US3NL), with split finish available on request.
22) Is a keypad lever like the Lockey 2835 an alternative to the Emtek Santa Fe passage set?
They are not interchangeable. The Lockey 2835 is a mechanical pushbutton keyless lever lock with passage function and ADA compliance for doors 1 3/16 inch to 2 inch, and the 2835DC adds a double combination - both add code-entry access control. The Santa Fe is a non-keyed brass passage leverset that simply latches, with no code or key. Choose the Lockey where entry needs to be controlled without keys, and the Santa Fe where the door only needs to stay closed.
23) Is the Emtek Santa Fe lever solid brass all the way through?
Brass is the material and the substrate, so the lever and rosette are brass rather than plated zinc. That matters in two places: brass takes and holds the living finishes like unlacquered brass and oil rubbed bronze, and it holds up better than pot metal on a door that gets pulled hundreds of times a week.
How fast can I get the Emtek 8100.SF.RH.US15 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 8100.SF.RH.US15 come with a warranty?
Absolutely. The Emtek 8100.SF.RH.US15 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 8100.SF.RH.US15?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Emtek 8100.SF.RH.US15 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!