Emtek EMP8114 Modern 5-1/2" Ke...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$806.00
$644.80
Emtek EMP8114 Modern 5-1/2" Keyed Sideplate Lockset, Passage/Single Keyed - Brass Tubular - EMPowered Upgrade

Emtek EMP8114 Modern 5-1/2" Keyed Sideplate Lockset, Passage/Single Keyed - Brass Tubular - EMPowered Upgrade

(No reviews yet) Write a Review

Model: EMP8114-US26
From the Brass Collection
$806.00
$644.80
Selected Finish is
Selected Knob or Lever Style for Inside Trim is
Selected Handing is
Selected Backset is
Selected FREE KEYING Options is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$806.00
$644.80
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Emtek EMP8114 Modern 5-1/2" Keyed Sideplate Lockset, Passage/Single Keyed - Brass Tubular - EMPowered Upgrade

  • Can be ordered with any Brass Knob or Lever Style
  • Sold as complete set. Includes Knob or Lever, Latch and Strike Plate
  • Standard 2-1/8" Door Prep
  • Standard latch is for 2-3/8" backset. Specify 2-3/4" backset if required
  • Handing required for Leverset

 

Specifications:

  • Backset: Adjustable 2-3/8" or 2-3/4"
  • Cross Bore: 2-1/8"
  • Door Thickness: 1-3/8" to 1-3/4"
  • Latch Faceplate: Round or Square Corner
  • Material: Brass

 

Manufacturer Resources:

Product Specs

Subcategory:
Keyed Sideplate Locksets
Collection:
Brass
Product Type:
Sideplate Locksets
Product Group:
Mechanical Locks
Product Subgroup:
Bored Locksets
Commercial/Residential:
Residential
Keyed Function:
Single Cylinder
Lock Type:
Tubular
Keyed:
Yes
Lock Function:
Entry
Series:
Modern
Theme:
Contemporary
Electronic:
Yes
MAP Policy:
Yes
Product Model:
8114
Product Function:
Entry
Product Style:
Contemporary
Product Material:
Brass
Product Category:
Mechanical Locks
Product Substrate:
Brass
Department:
Door Hardware

Emtek EMP8114-US26 – Frequently Asked Questions

1) Will the Emtek EMP8114 sideplate lockset fit my existing door prep?
It uses the standard 2-1/8 inch cross bore and fits doors 1-3/8 to 1-3/4 inches thick, so it drops into a normal bored door prep. The latch backset is adjustable, ordered as either 2-3/8 or 2-3/4 inches. Because the sideplate runs 5-1/2 inches center to center, you will need a stile deep enough to carry the plate above and below the bore, which a standard bored prep on a typical entry door handles.
2) What do I have to specify when ordering the Emtek EMP8114?
Five things are required on the order: the knob or lever style for the inside trim (over 85 brass styles from Stuttgart and Helios levers to Ace and Spoke knobs and crystal options), handing (right or left hand), backset (2-3/8 or 2-3/4 inch), keying (keyed different or keyed alike), plus the finish and keyway. Keying to code can be entered as free text if you need it cut to an existing key code.
3) Will the Emtek EMP8114 key alike with my existing Schlage or Kwikset keys?
Cylinder keyway is an ordering choice: Schlage keyway (standard) or Weiser WR5 keyway. Weiser WR5 is the same keyway family Kwikset-style keys use, so pick the one matching what is already on the house, then order keyed alike or supply your key code so the new lockset runs on the keys you already carry. It is a single cylinder entry lock, so key outside and thumbturn inside.
4) What is a comparable solid brass sideplate lockset to the Emtek EMP8114 if I do not want an electronic keypad?
The Omnia D12036A is a single cylinder deadbolt lever lockset in solid brass with a sideplate design, and it is a mechanical set rather than an electronic one. The Emtek 8114 Modern sideplate lockset is a brass tubular entry set with a single cylinder keyed function and is an electronic EMPowered set. If you want the sideplate look on a brass body without any electronics on the door, the Omnia D12036A covers that; if you want keypad access, stay with the Emtek 8114.
5) I need a key on both sides of a glass panel door - what should I use instead of the Emtek EMP8114?
The Emtek 8114 Modern sideplate lockset is a single cylinder set, so it is keyed from the outside only. For a door where you need key operation from both sides, the Omnia D12036AC is a double cylinder deadbolt lever lockset in solid brass with a sideplate design. Confirm your local code allows a double cylinder on the egress door before specifying it.
6) Why does handing matter on this Emtek sideplate lockset?
Handing is required because levers have to point the right way and the latch has to face the stop correctly. Emtek calls handing out specifically for leversets. Stand outside the door: if the hinges are on your right it is right hand, on the left it is left hand. Get it wrong and the lever will pitch up instead of down.
7) What comes in the box with the Emtek EMP8114 lockset?
It ships as a complete set: the knob or lever you selected, the latch, and the strike plate. The latch faceplate is available in round corner or square corner so it can match the mortise already cut in the door edge. Nothing else is needed to hang it on a prepped door beyond the screws supplied with the set.
8) Is the Emtek EMP8114 suitable for a commercial building entrance?
It is a residential-duty product. For an apartment unit door, a condo, or a house it is the right class of lock. For a commercial opening, a fire rated door, or anything needing a Grade 1 or Grade 2 bored lock, specify a commercial cylindrical lockset instead.
9) What is the difference between this Emtek keyed sideplate lockset and an Omnia sideplate deadbolt lever set?
The Emtek EMP8114 is a single cylinder tubular entry lockset, keyed outside with a sideplate at 5-1/2 inches. Omnia's D12036A is the single cylinder equivalent in solid brass, the D12036AC is the double cylinder version if you need a key on both sides (common with glass near the door), and the D12036PD is a double dummy with plates for a door that does not latch at all. Choose on function first, then trim style.
10) Can I match the Emtek EMP8114 to the other door hardware in my building?
Yes, and that is the main reason to spec it. The inside trim can be ordered with any Emtek brass knob or lever style, so the same lock body carries everything from Modern series levers like Stuttgart and Helios to traditional Victoria and Providence knobs or crystal knobs. Order keyed alike across several doors and the whole run works on one key with matching trim.
11) What matches the Emtek EMP8114 on an inactive or closet door that does not need to latch?
The Emtek 8114 Modern sideplate set is an entry function lockset with a latch and strike. On an inactive leaf or a closet door that only needs matching trim, the Omnia D12036PD is a solid brass dummy deadbolt lever lockset with plates on 5-1/2 inch center to center, which is the same center to center dimension as the 5-1/2 inch Emtek 8114 sideplate. A dummy set has no latch and is surface mounted.
12) Is the Omnia D12036A a direct drop-in replacement for an Emtek EMP8114?
Not a drop-in. Both are single cylinder brass sideplate-style sets, but the Emtek 8114 is a tubular lockset prepped for a standard 2-1/8 inch cross bore with an adjustable 2-3/8 or 2-3/4 inch backset, and it is an electronic keypad set. The Omnia D12036A is a deadbolt lever lockset. Treat it as a design alternative on a new prep rather than a retrofit into an existing Emtek 8114 opening.
13) What finishes does the Emtek EMP8114 keyed sideplate lockset come in?
Four: Oil Rubbed Bronze (US10B), Satin Nickel (US15), Flat Black (US19), and Polished Chrome (US26). All are on solid brass, and each finish is available with either the Schlage or Weiser WR5 keyway.
How fast can I get the Emtek EMP8114-US26 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek EMP8114-US26 come with a warranty?
Absolutely. The Emtek EMP8114-US26 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek EMP8114-US26?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Emtek EMP8114-US26 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!