Emtek Lost Wax Cast Bronze Key In Leverset - Siena Lever with Rosette Options - Single Cylinder

Handing is required on the Siena leverset. Every configuration is built either left hand or right hand, so you need to establish the swing before ordering. Stand outside the door (the keyed side): if the hinges are on your left and the door swings away from you, it is left hand. Get it backwards and the lever points the wrong way.

Standard latch is 2-3/8 inch backset. A 2-3/4 inch latch is available and is selected at order time. Measure from the door edge to the center of the bore hole on the existing prep and match it, since the two are not interchangeable in an already drilled door.

The Siena leverset is built for a standard 1-3/4 inch door. Thicker doors are accommodated, but the thickness has to be called out on the order so the correct spindle and screw pack goes in the box. Don't order standard and plan to shim it.

Yes. The Siena ships standard with a Schlage C keyway, and a Weiser WR5 keyway cylinder is available as a substitution with no upcharge. With the WR5 cylinder it can be keyed into an existing Weiser system, which is the usual reason a property manager picks it over the standard C.

Keying is selected on the order: keyed alike so one key runs every lock, or keyed different so each opening has its own. There is also a keying-to-code option if you already have a bitting code from an existing Emtek or Schlage C system and want new locks cut to match it.

No. The Siena is a residential tubular lockset, cataloged residential rather than commercial and with no ANSI grade behind it. For an office corridor or any door with real traffic, go to a graded cylindrical lock instead: the Hager 2525 is a Grade 2 commercial cylindrical entry lever for 1-3/8 to 2 inch doors, and the Corbin Russwin CL3300 series lever trim covers Grade 1 work.

Deltana's entry levers cover the same residential decorative entry role. The Deltana 5851 Claremont and 6201 Manchester are both entry function levers, and the Manchester is listed for doors 1-3/8 inch to 2 inch thick, while the Emtek Siena is built around a standard 1-3/4 inch door with thicker doors specified at order. The Siena is a lost wax cast bronze lever with a choice of #11, #12 or #14 rosette, so if the rosette shape is what you are matching, compare that trim first.

The Siena keyed lever is a residential tubular lockset, so for a graded commercial opening look at a cylindrical lock instead. The Cal-Royal AG05 is a Grade 2 storeroom lever with a deadlocking latchbolt, the Hager 2525 is a Grade 2 entrance lever, and the Dexter C1000 classroom lever is Grade 1. Those carry the grade designation a commercial spec usually calls out; the Siena is chosen for its cast bronze appearance on residential doors.

Keyless lever locks are the common mix-up. The Lockey 2835 is a mechanical pushbutton keyless lever with passage function, and the Delaney LP250 is an electronic keypad leverlock - neither takes a key cylinder the way the Siena does. The Siena is a single cylinder keyed entry lever, so if your residents carry keys or you are keying alike across a building, a keypad unit is not a drop-in. Dummy trim such as the BEST 7KC 1DT is also non-keyed and has no latch at all.

The rosette is the trim plate the lever mounts through, and it is purely the look of the escutcheon at the door face. Siena is offered on #11, #12 and #14 rosettes, and the rosette choice is reflected in the part number: 54011 for #11, 54012 for #12, 54014 for #14. Pick the one that matches the other openings in the house, since the lever itself is the same across all three.

Two: Flat Black Bronze (FB) and Medium Bronze (MB). Both are on lost wax cast bronze from the Tuscany collection, so they are living finishes that patina rather than a plated coating. A split finish is also available if you want a different finish on the interior and exterior sides, which is common when the inside of the door has to match painted or lighter interior trim.

Single cylinder means keyed outside, thumbturn or button inside, so you never need a key to get out. It is an entry function tubular lockset, latch only, with no deadbolt built in. If the opening needs a deadbolt, that is a separate lock ordered alongside and keyed to match.

A dummy Siena is available in the same #11, #12 and #14 rosettes and both bronze finishes, handed left or right. Dummy trim is surface mounted with no latch and no bore, so it is what goes on an inactive leaf or a closet door where you just need a pull that matches the keyed openings. If you want a functioning non-keyed lever in the same look, note the dummy does not latch at all.

The bore prep is the same class of tubular residential lockset, but the key system is not. Siena comes standard on Schlage C, so it will not key alike with a Kwikset set such as the 200BRNL Breton. If you are matching existing Kwikset-family keys, order the Weiser WR5 cylinder substitution instead of the standard C. Also confirm the existing backset is 2-3/8 or 2-3/4 inch and call out the matching latch.

Within the Siena line the non-locking companion is the dummy version, offered in the same Flat Black Bronze and Medium Bronze finishes and the same #11, #12 and #14 rosettes, so the trim matches exactly. If you are matching a different decorative family instead, Baldwin's Estate 5103 is offered as passage, privacy and half dummy with the 5048 rose, giving you the full interior function run in one design.

They fill the same keyed residential opening but differ in build and finish. The Callan Bennett is a Grade 3 entrance leverset offered as an entry and deadbolt combo, and the Master Lock BC Series RL01 is a Grade 3 keyed entry lever. The Emtek Siena is lost wax cast bronze in Flat Black Bronze or Medium Bronze, handed left or right, with the cylinder available in Schlage C or Weiser WR5 keyway. If keying into an existing Weiser or Schlage system and bronze appearance drive the job, the Siena is the closer match.

The Siena is built to a standard 1-3/4 inch door and thicker doors must be specified when ordering, with door thickness entered as a text field. If you would rather order a lever that publishes a wider range outright, the Hager 2510 covers 1-3/8 inch to 2 inch, and the Falcon K101 Grade 1 passage lock covers 1-3/8 inch to 2-1/4 inch. Note those are passage function, not keyed entry.

Handing is required on the Siena leverset, and the left hand and right hand builds are separate part numbers. If a non-handed lever simplifies your order, Falcon's B Series uses a non-handed design, as does the K101 with non-handed levers, and Dexter's C1000 passage lever uses a clutching mechanism. Those are passage function, so for a keyed opening you would still be specifying hand on the Siena or choosing a different keyed cylindrical family.

Both are decorative residential levers on a rose, but they land differently. Siena is lost wax cast bronze from Emtek's Tuscany collection, offered as a keyed single cylinder entry set in Flat Black or Medium Bronze. The Baldwin Estate 5103 on the 5048 rose is carried in passage, privacy and handed half dummy versions, so if the door needs privacy rather than key, the 5103 covers it and the Siena keyed set does not.