Emtek Lost Wax Cast Bronze Kno...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$270.00
$224.87
Emtek Emtek Lost Wax Cast Bronze Knobsets - Petal Knob, Passage Set EMTEK-LOST-WAX-CAST-BRONZE-KNOBSETS-PETAL-PASSAGE

Emtek Lost Wax Cast Bronze Knobsets - Petal Knob, Passage Set

(No reviews yet) Write a Review

Model: 71011.PT.MB
From the Tuscany Bronze Collection
$270.00
$224.87
Selected Latch is
Selected Rosette is
Selected Finish is
Selected Backset is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$270.00
$224.87
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Emtek Lost Wax Cast Bronze Knobsets - Petal Knob, Passage Set

  • Can be ordered with any Lost Wax Bronze rosette
  • Sold as complete set. Includes Latch and Strike Plate
  • 28 Degree Latch (included when CF Mechanism is selected)
  • Fits any door between 1-3/8” to 2-1/4" thick with a 2-1/8" bore standard door prep*
  • Standard latch is for 2-3/8" backset. Specify 2-3/4" backset if required

* STRETTO rosette requires a 1-1/4” diameter bore hole and 2-hole door preparation for thumbturn privacy


 

Specifications:

  • Backset: Adjustable 2-3/8" or 2-3/4"
  • Cross Bore: 2-1/8"
  • Door Thickness: 1-3/8" to 1-3/4"
  • Latch Faceplate: Round or Square Corner
  • Material: Brass

Product Specs

Subcategory:
Knobsets
Collection:
Tuscany Bronze
Product Type:
Knobsets
Product Group:
Mechanical Locks
Product Subgroup:
Bored Locksets
Commercial/Residential:
Residential
Handle Type:
Knob
Lock Type:
Tubular
Series:
Petal
Theme:
Tuscany
Electronic:
No
Keyed Function:
Non-Keyed
Keyed:
No
Lock Function:
Passage
MAP Policy:
Yes
Product Function:
Passage
Product Style:
Tuscany Bronze
Product Material:
Bronze
Product Category:
Mechanical Locks
Product Substrate:
Bronze
Department:
Door Hardware

Emtek 71011.PT.MB – Frequently Asked Questions

1) Will the Emtek Petal passage knob fit a 1-3/4 inch door with a standard 2-1/8 inch bore?
Yes. The Petal passage knobset drops into standard door prep, a 2-1/8 inch cross bore, and covers doors from 1-3/8 to 2-1/4 inches thick. The standard latch ships for a 2-3/8 inch backset; if your bore is centered 2-3/4 inches from the door edge, specify the 2-3/4 inch backset when you order. One exception on the prep: the STRETTO rosette needs a 1-1/4 inch diameter bore and a 2-hole preparation for the thumbturn.
2) What is a passage knob, and is the Emtek Petal knob the right function for a bedroom or bathroom?
Passage means latching only, no lock. The Petal knobset is non-keyed with no privacy button, so it turns freely from both sides and is meant for halls, closets, and doors between rooms. For a bedroom or bath you want a privacy function with a thumbturn instead. Emtek offers the Petal knob in a privacy set; among other brands ZenSupply carries, the Deltana 6112 St. Thomas privacy knob and the Baldwin Estate 5000 Baltimore privacy knob are alternatives in the same decorative vein.
3) What is the CF mechanism option on Emtek knobsets, and what does the 28 degree latch do?
CF stands for concealed fastener: the rosettes mount with no exposed screws, which is what you want when the trim is on display. Choosing CF includes the 28 degree rotation latch, which retracts the bolt with a shorter turn of the knob than a conventional latch. You can also order the 28 degree latch on its own without the concealed-fastener mechanism, or take the standard latch. All three latch choices are offered with each of the #11, #12, #14, and #15 rosettes in both Flat Black Bronze and Medium Bronze.
4) Is the Emtek Petal bronze knobset suitable for a commercial building or an office corridor?
No. The Petal is a residential tubular lockset in cast bronze, sold for homes rather than commercial openings. If you need a passage knob for a commercial corridor or an institutional spec, look at a graded cylindrical lock instead: the Corbin Russwin CK4310 is Grade 1 passage, the Falcon X101 is Grade 1 heavy duty passage with an interchangeable core, and the Dexter C2000 and Arrow MK01 are Grade 2 passage knobs.
5) I have a thick 2 inch door. Will an Emtek Petal passage knob work, or do I need something else?
It works. The Petal knobset covers 1-3/8 up to 2-1/4 inch doors, which is wider than most residential knobs handle. For comparison, the Deltana 6171 Round Knob and the Corbin Russwin CK4310 stop at 2 inches, and the Dexter C2000 and Arrow RK01 stop at 1-3/4 inches. On thick or nonstandard doors, put the actual thickness in the door thickness field on the order so the spindle and screws are sized to it.
6) Do I have to specify the backset when ordering an Emtek Petal knobset?
Yes, backset is a required selection: 2-3/8 inches or 2-3/4 inches. Measure from the edge of the door to the center of the 2-1/8 inch bore. 2-3/8 is the usual residential backset and 2-3/4 turns up on heavier or commercial-prepped doors. Get it wrong and the latch won't reach the strike, so measure the existing hole before you order rather than assuming.
7) What is a straight equivalent to the Emtek Petal passage knob if the door needs an ANSI grade for a commercial spec?
The Emtek Petal passage knob is a residential tubular passage set, so for an opening that has to carry a stated grade, look at graded passage knobs instead. The Corbin Russwin CK4310 is a Grade 1 passage/closet cylindrical lock with a Global knob and a 1-3/8 inch to 2 inch door thickness range, and the Schlage D10S is a Grade 1 heavy duty passage knob lock with the Orbit knob. Both are non-keyed passage function like the Petal, so the latch behavior is the same - the knob turns from both sides and there is nothing to lock.
8) Is a dummy knob the same as the Emtek Petal passage set?
No. The Petal passage set is a working latch - it ships with the latch and strike plate and needs a 2-1/8 inch cross bore. A dummy knob is surface trim with no latch at all, used on a fixed leaf or a ball-catch door. The Schlage A170 is a Grade 2 single dummy trim, the BEST 6K single dummy trim is a Grade 2 medium duty knob trim, and the Omnia 434/0 is an egg-shaped single dummy lockset. Ordering a dummy in place of the Petal leaves the door with nothing to hold it closed.
9) What passage knob should I use instead of the Emtek Petal on a fire rated door?
The Petal set is a residential passage knob. Where the opening carries a fire rating, the Falcon W101 is a Grade 2 medium duty cylindrical knob lock in passage/closet function with a fire rating and a 2-3/4 inch backset, and the Falcon X101 is a Grade 1 heavy duty passage knobset with a fire rating, an interchangeable core and a 1-3/8 inch to 2-1/4 inch door thickness range. The X101's thickness range covers thicker doors than the Petal's 1-3/8 inch to 1-3/4 inch.
10) Can I use the Emtek Petal passage knob on a storeroom or classroom door?
No - the Petal is non-keyed passage function, so the knob always turns and the door never latches locked. A storeroom door needs a keyed function set: the Sargent 8XG04 is a Grade 1 heavy duty storeroom/closet single cylinder knob lock with a 2-3/4 inch backset, the Sargent 6G04 is a Grade 2 storeroom/closet knob lock with a single cylinder, and for a classroom the Dexter C2000 classroom ball knob lock is Grade 2 and keyed.
11) What comes in the box with the Emtek Petal passage knobset?
It's sold as a complete set: both knobs, the rosettes you select, the latch, and the strike plate. Nothing else is needed to hang it on a door that's already bored. Pick the latch faceplate style, round corner or square corner, to match the mortise already cut in your door edge.
12) Can I get the Emtek Petal knob with a different rosette than the ones normally shown?
The Petal knob can be ordered with any Lost Wax Bronze rosette. The configured combinations cover the #11, #12, #14, and #15 rosettes in Flat Black Bronze (FB) and Medium Bronze (MB), and the CF concealed-fastener versions of each. If you're matching a rosette already installed elsewhere in the house, note it in the comments field on the order.
13) Will an Emtek Petal knob match the other Tuscany Bronze hardware in the house?
The Petal knob is part of Emtek's Tuscany Bronze collection, cast in solid bronze by the lost wax process, and comes in Flat Black Bronze (FB) and Medium Bronze (MB). Order the same finish code as the rest of the Tuscany Bronze hardware and the knobs will read as a set. Keep in mind that cast bronze finishes are living finishes and each casting varies slightly, which is part of the look.
14) Can I replace a builder-grade Kwikset passage knob with an Emtek Petal knob without redrilling the door?
In most cases yes. A Kwikset 200P Polo passage knob sits in the same standard 2-1/8 inch bore with a 2-3/8 or 2-3/4 inch backset, and the Petal passage set uses that same prep. The strike plate ships with the set, so swap that too. The one thing to check is the latch face mortise in the door edge, round corner or square corner, and pick the matching faceplate.
15) The Emtek Petal knob is passage - what do I order for the same doors when the opening has to be keyed?
Keep the Petal on the interior doors and switch to a keyed set at the entry. The Baldwin Estate 5011 Colonial is a passage knob on a 5058 rose if you want the interior to stay non-keyed, and for the keyed opening the Kwikset 400P Polo is a keyed entry knob supplied with a 6AL latch and RCS strike, while the Deltana 6171 Round Knob entry set covers 1-3/8 inch to 2 inch doors. The Petal itself is sold as a complete set with latch and strike plate, so you are swapping a whole lockset, not just a cylinder.
16) What is a simpler passage knob to use in place of the Emtek Petal on closet and hall doors where the cast bronze look is not needed?
On back-of-house doors where the Petal's lost wax cast bronze knob is more finish than the opening needs, the Kwikset 200P Polo is a passage knob for interior hall and closet doors supplied with a 6AL latch and RCS round corner strike, and the Pamex FTF Baron is a Grade 3 passage knob lockset covering 1-3/8 inch to 1-3/4 inch doors. The Bravura Albany and Bravura Lynchburg are Grade 2 passage knobsets on round trim. All are passage function, so the door behaves the same way as it does with the Petal.
17) Which passage knob covers a door thicker than the Emtek Petal knobset handles?
The Petal specifications list a door thickness of 1-3/8 inch to 1-3/4 inch. For a thicker leaf, the Corbin Russwin CK4310 Grade 1 passage/closet lock runs 1-3/8 inch to 2 inch, and the Falcon X101 Grade 1 passage knobset runs 1-3/8 inch to 2-1/4 inch. Both are passage function with no cylinder, matching how the Petal operates.
18) What passage knob matches the Emtek Petal for an opening that only needs Grade 2 rather than Grade 1?
The Corbin Russwin CK4410 is a Grade 2 passage/closet cylindrical lock with a Global knob and a 1-3/8 inch to 1-3/4 inch door thickness range - the same thickness range the Petal specifications list. The Dexter C2000 passage ball knob is also Grade 2, non-clutching and non-keyed, covering 1-3/8 inch to 1-3/4 inch, and the Arrow MK01 and RK01 are Grade 2 passage cylindrical knob locks over the same range.
19) Is the Sargent 28C-KNOB or the Sargent 78-2875 an alternative to the Emtek Petal passage knobset?
No. Both are exit device trim, not standalone knobsets. The Sargent 28C-KNOB is exit device trim with a knob and rose in entrance function for 1-3/4 inch doors, and the Sargent 78-2875 is an outside knob only in the 7800 series - neither operates a door on its own. The Emtek Petal is a complete tubular passage set with the latch and strike plate included, fitting a 2-1/8 inch bore standard door prep.
20) What do I use instead of the Emtek Petal passage knob if the door needs keyless code entry?
The Petal is a mechanical non-electronic passage set with no code capability. The Lockey 3830 is a mechanical keyless combination knob lock with an auto-locking passage function and a 1 3/16 inch to 2 inch door thickness range, so it takes a code at the door with no key and no power. It fits a thicker door than the Petal's 1-3/8 inch to 1-3/4 inch range as well.
21) Is there a passage knob with an adjustable backset like the Emtek Petal for a job where door preps vary?
The Petal takes a 2-3/8 inch or 2-3/4 inch backset, so you specify which one the opening needs. Where the preps on a job are mixed, the Kwikset 200P-CP Polo passage knob ships with a round corner adjustable latch and round corner strike, and the Schlage Residential F500 Plymouth with Georgian knob comes as a combo pack with adjustable backsets and dual strikes covering 1-3/8 inch to 1-3/4 inch doors.
22) I want the Petal knob look on a closet door that doesn't need a working latch. What should I order?
A passage set is the wrong part for a surface-mounted or double closet door that doesn't take a latch; you want a dummy knob, which is trim only with no latch or bore. ZenSupply carries dummy knobs including the Omnia 434/0 egg-shaped single dummy in solid brass, the Bravura Biloxi round trim dummy, and the Schlage A170 single dummy trim. The Petal passage set includes a working latch and needs a bored door.
23) What other solid brass decorative passage knobs work alongside the Emtek Petal on a traditional interior?
The Emtek Petal passage knob is a bronze knob in the Tuscany collection. In the same traditional decorative bracket, the Omnia 434/PA is an egg-shaped knob latchset in passage function with solid brass construction and a 3 inch projection, and the Baldwin Estate 5000 Baltimore passage set is preconfigured with a 5048 rose, a 2-3/8 inch backset and a full lip strike - the same 2-3/8 inch backset the Petal uses as its standard latch.
How fast can I get the Emtek 71011.PT.MB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 71011.PT.MB come with a warranty?
Absolutely. The Emtek 71011.PT.MB is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 71011.PT.MB?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Emtek 71011.PT.MB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!