Emtek Mod Hex Extended Cabinet Pull, Schaub Collection

Two hole spacings: 3-1/2 inch and 6 inch center to center. If you are replacing existing pulls, measure hole to hole on the door or drawer front and match one of those two, otherwise you are drilling new holes and patching the old ones.

The Mod Hex Extended Cabinet Pull is made in 3-1/2 inch and 6 inch center-to-center only. For a 4 inch hole spacing, the Omnia 1968/102 modern cabinet pull is forged solid brass with 4 inch center-to-center spacing. For 3 inch spacing, the Trimco 553 Series drawer pull is made at 3 inch center-to-center, and the Trimco 562 Series covers 3-1/2 inch, 4 inch, and 96mm spacings on one series.

The Mod Hex Extended Cabinet Pull projects 1-7/8 inch from the face. If you need a shallower stand-off in a tight aisle or next to an adjacent appliance, the Omnia 1969 and Omnia 1971 modern cabinet pulls are forged solid brass at 1-3/16 inch projection, and the Omnia 1970 is forged solid brass at 1-1/4 inch projection.

Projection is 1-7/8 inches. That is a deep standoff for a cabinet pull, so check clearance where a drawer sits next to a wall return, a range handle, or an inswinging door, and account for it on knuckle room in tight galley runs.

Six finishes across both sizes: Oil Rubbed Bronze (US10B), Polished Nickel (US14), Satin Nickel (US15), Flat Black (US19), Polished Chrome (US26) and Satin Brass (US4). The US finish codes let you line the cabinet pulls up with door hardware already specified on the job in the same code.

Brass. Both the material and the substrate are brass, so the finish sits on brass rather than on a cast zinc core.

It is classified as residential hardware. For apartment turns, model units and custom residential millwork it is on spec; for a high-traffic commercial casework package, a pull carried as commercial-duty is the safer call.

The 3-1/2 inch spacing suits base cabinet doors and narrower drawer fronts; the 6 inch works better visually on wide drawer banks and tall pantry doors. Mixing the two across one kitchen is normal practice, and since both come in all six finishes you can keep the run consistent.

The Deltana SBP35 Modern Square Bar Pull is a heavy-duty solid brass pull at 3-1/2 inch center to center, so it drops into the same hole spacing as the smaller Mod Hex with a plain square bar shape. If you want a shallower standoff, the Omnia 1970 is a forged solid brass modern pull with a 1-1/4 inch projection, well under the Mod Hex Extended's 1-7/8 inches.

The Mod Hex Extended Cabinet Pull is a cabinet pull in a residential brass line, made at 3-1/2 inch and 6 inch center-to-center. For an appliance panel you generally want a longer pull sized for the door: the Schaub 79-8 Steamworks is an 8 inch cabinet pull catalogued as an appliance pull. Match the appliance manufacturer's hole spacing before ordering either.

No. The Mod Hex Extended is a surface-mounted cabinet pull with a 1-7/8 inch projection that bolts through the drawer or door face. The Schaub Sabre 10010, 10011, and 10012 are edge pulls, made at 3 inch, 4 inch, and 5 inch center-to-center respectively, designed to mount along the edge of a door or drawer rather than stand off the face. They are not interchangeable in the same hole pattern or the same look.

The Mod Hex Extended Cabinet Pull is a two-hole pull in an Urban Modern brass line. If the doors call for single-hole knobs instead, the Orca Hardware Bachelor Collection CK-15030 is a round cabinet knob at 1-1/4 inch diameter, the CK-16030 is a round ring cabinet knob at 1-1/4 inch diameter, and the Blackcomb CK-17025 is a square cabinet knob at 25mm diameter. Knobs take a single bore, so they will not reuse a two-hole pull drilling.

The Mod Hex Extended Cabinet Pull is solid brass and catalogued for residential use. If you want a steel pull instead, the Orca Hardware CK-12001 T-Pull Bar is steel with a 2 inch bar width in satin nickel. It is a T-bar profile rather than a hex bar, so it will read differently alongside existing Mod Hex hardware.

That combination is MPN SPC86685US4, the 6 inch CTC pull in Satin Brass (US4). The SPC prefix reflects the Schaub collection origin of the Mod Hex line.

Styling is Urban Modern under a contemporary theme, which is the faceted hex-bar look that reads correctly on flat-slab and shaker-lite fronts. On traditional raised panel doors it will look deliberate rather than period-correct.