Emtek Modern Brass Key In Leverset - Hanover Lever with Rosette Options - Dummy (Pair)

Dummy function, so there's no latch and no key. The Hanover lever is fixed to the rosette and acts as a pull, which is what you want on the inactive leaf of a pair of French doors, a closet door held by a ball catch, or a cabinet-style door. It ships as a pair, meaning a lever on each face of the door. If you need the door to actually latch shut, you want a passage set instead.

Yes, handing is required on Emtek leversets, and it's ordered left hand or right hand. On a dummy set nothing operates, but the lever still has to point the correct way when the door is closed, so stand outside the opening (the pull side), see which edge the hinges are on, and order to match. Get it backwards and the lever sweeps the wrong direction, which is the most common reason one of these comes back.

Door thickness runs 1-3/8 to 1-3/4 inches, and it's surface mount, so no door prep is required. That's the practical advantage of a dummy over a functional lockset: on an unbored slab you just fasten the rosettes through the face. Standard build assumes 1-3/4 inches, so if your door is thicker than that, state the actual thickness on the order.

That's the usual reason to buy it. Seven finishes are offered: Flat Black (US19), Oil Rubbed Bronze (US10B), Polished Chrome (US26), Polished Nickel Lifetime (US14), Satin Brass (US4), Satin Nickel (US15), and Unlacquered Brass (US3NL). Rosette choice is separate and covers Classic Brass #8, Rectangular, Regular, and Rope (Rope in limited finishes), plus Modern Brass Disk, Rectangular, and Square. Match the finish and rosette to the passage and privacy sets on the adjacent openings and the dummy disappears into the set. A split finish can also be called out on the order if the two faces need to differ.

The Hanover dummy leverset is a brass, residential-duty lever pair. Where a heavy-duty commercial spec is called for on the same non-latching opening, the BEST 9K Series 1DT single dummy trim cylindrical lever is a Grade 1, heavy-duty, non-keyed dummy. The Accentra 455LN Augusta is another Grade 1 heavy-duty single dummy cylindrical lever lock. Both are single dummy trim, so a door needing a lever on each face takes two, where the Hanover is supplied as a pair.

No - a dummy set does not lock. The Emtek Hanover dummy is a non-keyed, non-latching lever pair. For a door that has to lock from inside, the Baldwin Estate 5103 privacy lever with 5048 rose is a privacy function in the same lever family, the Kwikset 300BRNL RDT Breton is a Grade 3 privacy lever set for 1-3/8 inch to 1-3/4 inch doors, and the Hager 2540 Withnell is a Grade 2 privacy cylindrical lock for 1-3/8 inch to 2 inch doors.

No. Backset only matters when there is a latch to reach the door edge, and the dummy has none. Emtek's stated standard is a 2-3/8 inch backset with 2-3/4 inch available on request, but that applies to the latched functions in the Hanover line. For the dummy you're only positioning the rosette on the face, so pick the height and setback that matches the other doors in the run.

A pair puts a lever on both faces of the door; a half dummy puts one lever on a single face. The Emtek Hanover here is the pair, which suits a door you touch from both sides, such as the inactive leaf of a double door. If you only need one side, a half dummy is the right buy: the Baldwin Estate 5103 half dummy with the 5048 rose comes handed left or right and does exactly that. Ordering a pair when you needed one lever means paying for hardware that goes in the drawer.

Emtek builds the Hanover lever across functions, so the dummy pair is the non-latching member of a family you can carry through a floor plan: passage for hall and closet doors, privacy for bed and bath, and keyed entry where you need a cylinder. Keep the finish and rosette selection identical across all of them and the openings read as one set. Note that the keyed functions can be built on the Weiser (WR5) keyway by adding a W to the front of the product code, at no upcharge for the cylinder substitution, so an entry door can be keyed into an existing Weiser system. The dummy itself takes no cylinder.

Thicker doors are handled by calling out the actual door thickness with the order, which is a field on the order form for this leverset. The build defaults to 1-3/4 inches otherwise. This comes up on solid entry slabs and on doors that have picked up thickness from a face applique, so measure the leaf rather than assuming.

The Emtek Hanover dummy leverset is a contemporary brass lever offered in seven finishes including Flat Black (US19), Oil Rubbed Bronze (US10B) and Unlacquered Brass (US3NL), with a choice of seven rosettes. If the finish and rosette range is not the point, the BEST 7KC Series single dummy trim cylindrical lever is a Grade 2, medium-duty, non-keyed dummy, and the Callan Bentley BN5051 is a Grade 2 dummy lever. Both give the same non-latching lever without the rosette selection.

The Emtek Hanover dummy is ordered Left Hand (LH) or Right Hand (RH), so the opening has to be handed before the order goes in. Among cylindrical levers, the Falcon B101 Grade 2 passage lock and the Falcon K101 Grade 1 passage lock are built with non-handed levers, and the Falcon K101 covers 1-3/8 inch to 2-1/4 inch doors with a fire rating. Those are latching passage sets rather than dummies, so they suit an opening that needs a latch and field-reversible trim.

The Emtek Hanover dummy leverset covers doors from 1-3/8 inch to 1-3/4 inch as standard, with thicker doors called out at time of order. For a thicker leaf handled by the standard part, the Deltana 6201 Manchester and 6431 Linstead entry levers both cover 1-3/8 inch to 2 inch, the Hager 2525 Grade 2 entry lever covers 1-3/8 inch to 2 inch, and the Corbin Russwin CL3110 Grade 1 vandal-resistant passage lever covers 1-3/4 inch to 2 inch with a fire rating. Those are latching functions, not dummies.

No. The Hanover dummy is non-keyed with no cylinder and no latch. For a keyed opening, the Dexter C1000 Series entry/office lever is Grade 1 clutching and keyed for 1-3/8 inch to 1-3/4 inch doors, the Cal-Royal AG00 entrance lever is Grade 2 with a 6-pin Schlage C keyway and 2-3/8 inch backset, and the Falcon B511CP6D is a Grade 2 entry/office cylindrical lever. For a storeroom function, the Cal-Royal AG05 is a Grade 2 storeroom lever with a deadlocking latchbolt.

A dummy has no mechanism at all, so it's the wrong part the moment you need controlled access. For mechanical keyless entry on a lever, the Lockey 2835 covers 1-3/16 to 2 inch doors and the Lockey 1150 heavy duty keypad set covers 1-1/8 to 2 inches, both with a passage-style lever. If you'd rather have electronic, the Delaney LP250 keypad leverlock is a Grade 2 option. All three demand a bored door, unlike the surface-mounted Emtek dummy.

Brass, both as the material and the substrate, from Emtek's Brass collection. That matters if you're specifying Unlacquered Brass (US3NL), since an unlacquered finish is bare brass left to patina with handling rather than a coating over another metal. The other six finishes are applied over the same brass base.

The Emtek Hanover dummy is a tubular lever set in brass. To match trim already running on Grade 2 cylindrical hardware, the BEST 7KC Series 1DT single dummy trim is Grade 2 medium duty and shares the 7KC lever family, and the Callan Bentley BN5051 is a Grade 2 dummy lever. Where the facility standard is Grade 1, the BEST 9K Series 1DT and the Accentra 455LN Augusta are the heavy-duty dummy trims in those families.