Emtek Modern Designer Brass Kn...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$240.00
$196.36
Emtek Modern Designer Brass Knobset - Verve Knob, Privacy Set

Emtek Modern Designer Brass Knobset - Verve Knob, Privacy Set

(No reviews yet) Write a Review

Model: 5207.VR.US19
From the Brass Collection
$240.00
$196.36
Selected Latch is
Selected Rosette is
Selected Finish is
Selected Backset is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$240.00
$196.36
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Emtek Modern Designer Brass Knobset - Verve Knob, Privacy Set

  • Can be ordered with any Brass rosette
  • Sold as complete set. Includes Latch and Strike Plate
  • 28 Degree Latch (included when CF Mechanism is selected)
  • Fits any door between 1-3/8” to 2-1/4" thick with a 2-1/8" bore standard door prep*
  • Standard latch is for 2-3/8" backset. Specify 2-3/4" backset if required

* STRETTO rosette requires a 1-1/4” diameter bore hole and 2-hole door preparation for thumbturn privacy


 

Specifications:

  • Backset: Adjustable 2-3/8" or 2-3/4"
  • Cross Bore: 2-1/8"
  • Door Thickness: 1-3/8" to 1-3/4"
  • Latch Faceplate: Round or Square Corner
  • Material: Brass

Product Specs

Subcategory:
Knobsets
Collection:
Brass
Product Type:
Knobsets
Product Group:
Mechanical Locks
Product Subgroup:
Bored Locksets
Commercial/Residential:
Residential
Handle Type:
Knob
Lock Function:
Privacy/Bed/Bath
Lock Type:
Tubular
Series:
Verve
Theme:
Contemporary
Electronic:
No
Keyed:
No
Keyed Function:
Non-Keyed
MAP Policy:
Yes
Product Function:
Privacy/Bed/Bath
Product Style:
Contemporary
Product Material:
Brass
Product Category:
Mechanical Locks
Product Substrate:
Brass
Department:
Door Hardware

Emtek 5207.VR.US19 – Frequently Asked Questions

1) Will the Emtek Verve privacy knob fit a 1-3/8 inch door, and how thick can the door be?
The Verve privacy knobset covers doors from 1-3/8 inches up to 2-1/4 inches thick with a standard 2-1/8 inch cross bore. There is a door thickness field on the order form, so give the actual thickness when you order rather than assuming the middle of the range. One exception on the prep: if you pick the STRETTO rosette, the door needs a 1-1/4 inch diameter bore and a 2-hole preparation for the thumbturn instead of the usual single 2-1/8 inch cross bore.
2) Does the Emtek Verve knob work with a 2-3/4 inch backset, or is it 2-3/8 only?
Both. Backset is a required choice at order time, 2-3/8 inches or 2-3/4 inches. The standard latch shipped is the 2-3/8 inch one, so if your existing bore is 2-3/4 inches from the door edge to the center of the hole, you have to call that out. Measure the existing hole before ordering; picking the wrong backset means the latch will not reach the strike.
3) What does the privacy function on the Verve knob actually do, and can it be keyed?
Privacy means bed and bath: a thumbturn on the inside locks the knob, no key involved. It is a non-keyed lockset and cannot be ordered keyed, so it is the wrong choice for an exterior door, an office, or anything you need to control with a key. For a keyed opening in the same knob format, look at an entrance-function knob like the Corbin Russwin CK4851 or the Dexter C2000 entry knob.
4) Is the Emtek Verve knobset rated for commercial traffic, or is it a residential lock?
Residential. The Verve is a solid brass tubular lockset built for houses and residential-style interiors, not for a commercial corridor or an institutional bathroom. If you are speccing for a school, hospital, or office building where you need a graded cylindrical lock, go to something like the Dexter C2000 Grade 2 privacy knob or the Corbin Russwin CK4400 Series in the non-keyed functions. Those are cylindrical chassis locks with published ANSI grades; the Verve is a designer residential set.
5) Will the Emtek Verve knob drop into a door already prepped for a standard residential knob?
In most cases yes. Standard residential prep is a 2-1/8 inch cross bore with a 2-3/8 or 2-3/4 inch backset, and the Verve privacy set is built for exactly that, 2-1/8 inch cross bore and either backset. Match the latch faceplate corner to what is cut into the door edge, round or square, and no chiselling is needed. The one prep that is not a drop-in is the STRETTO rosette, which wants a 1-1/4 inch bore and a two-hole layout.
6) What is the closest cross-brand equivalent to the Emtek Verve knob privacy set for a bedroom or bathroom door?
The Verve knob privacy set is a non-keyed privacy/bed/bath tubular knobset in brass, adjustable for a 2-3/8 inch or 2-3/4 inch backset and doors 1-3/8 inch to 1-3/4 inch thick. The Deltana 6112 St. Thomas knob privacy covers the same privacy/bed/bath function and fits doors 1-3/8 inch to 2 inch, so it reaches thicker doors. The Baldwin Estate 5000 Baltimore knob with 5148 rose is also a privacy lock and comes preconfigured with a 2-3/8 inch backset and full lip strike, so the backset is fixed rather than chosen. Function matches across all three; what differs is the door thickness range and whether backset is selectable.
7) Is there a graded privacy knob lock to use instead of the Emtek Verve on a commercial bathroom door?
The Verve knob privacy set is a residential brass knobset and carries no ANSI grade. For an opening where a grade is specified, the Dexter C2000 Series privacy cylindrical ball knob is Grade 2, non-keyed, and fits doors 1-3/8 inch to 1-3/4 inch. The Pamex FTF Baron knob lockset in privacy function and the Cal-Royal BER20 privacy knob are both Grade 3 privacy locks over the same 1-3/8 inch to 1-3/4 inch door range. All three share the Verve's privacy/bed/bath function; the difference is that they are graded cylindrical locks rather than a designer brass set.
8) The Emtek Verve privacy knob will not work because the door needs a key. What knobset takes its place?
The Verve knob privacy set is non-keyed, so any opening that has to lock with a key needs a different set. For a keyed entrance, the Kwikset 400P-CP Polo keyed entry knob is Grade 3 and fits doors 1-3/8 inch to 1-3/4 inch, and the Cal-Royal BER00 is a Grade 3 entrance/office knob lock with a Kwikset keyway over the same range. On a heavier opening, the Corbin Russwin CK4851 is an entrance/office cylindrical lock with a conventional cylinder for doors 1-3/8 inch to 2 inch, and the BEST 8K Series is a Grade 1 heavy duty entrance knob lock with a single cylinder.
9) The door is thicker than 1-3/4 inches. What knob lock works where the Emtek Verve privacy set does not?
The Verve knob privacy set is specified for doors 1-3/8 inch to 1-3/4 inch thick with a 2-1/8 inch cross bore. On a thicker door, the Deltana 6112 St. Thomas privacy knob and the Deltana 6171 round knob entry both cover 1-3/8 inch to 2 inch, the Corbin Russwin CK4851 entrance/office lock covers 1-3/8 inch to 2 inch, and the Falcon X101 Grade 1 heavy duty passage knobset covers 1-3/8 inch to 2-1/4 inch. Of these, the Deltana 6112 is the one that keeps the privacy/bed/bath function.
10) What comes in the box with the Emtek Verve privacy knobset?
It ships as a complete set: both knobs, the rosettes you specify, the latch, and the strike plate. Nothing else to buy to hang it on a prepped door. The latch faceplate comes round corner or square corner, so match whatever is already mortised into the door edge and you can skip re-cutting the edge.
11) What is the difference between the CF mechanism and the standard latch option on Emtek knobsets?
It is what you see on the rosette. The CF mechanism mounts with no exposed screws on the rose, and it comes with the 28 degree rotation latch included. The standard latch option uses conventional through-screw mounting. There is also a 28 degree rotation latch you can order on its own; that shorter knob rotation is what pairs with the concealed-fastener trim. If clean rosettes matter on the job, pick CF and you get the matching latch automatically.
12) Which rosette shapes can I get with the Emtek Verve knob?
Six rose shapes are offered with the Verve knob: Disk, Modern, Modern Rectangular, Neos, Square, and Urban Modern. The knob takes any brass rosette in the line, so you can square off the trim on a contemporary opening or keep it round to match existing plates. Worth knowing before you spec: rosette choice can change the door prep, since the STRETTO rose calls for a 1-1/4 inch bore and a two-hole prep rather than the standard 2-1/8 inch cross bore.
13) What finishes does the Emtek Verve knob come in, and can I mix finishes on one door?
Seven finishes: Flat Black (US19), Oil Rubbed Bronze (US10B), Polished Chrome (US26), Polished Nickel Lifetime (US14), Satin Brass (US4), Satin Nickel (US15), and Unlacquered Brass (US3NL). Split finish is an option at order time, so you can run one finish on the corridor side and another inside the room. Note that unlacquered brass is a living finish and will darken with handling, which matters if you are trying to match existing hardware across a floor.
14) Which knobset should be ordered for the hall and closet doors alongside Emtek Verve privacy knobs on the bedrooms?
The Verve privacy set locks with a thumbturn and is meant for bed and bath doors, so hall and closet doors take a passage set instead. Comparable passage knobsets include the Pamex FTF Baron in passage function, Grade 3, for doors 1-3/8 inch to 1-3/4 inch; the Dexter C2000 Series Grade 2 passage ball knob over the same door range; and the Bravura Albany and Lynchburg round trim passage knobsets, both Grade 2. Baldwin's Estate 5000 Baltimore knob with 5048 rose is a passage lock preconfigured with a 2-3/8 inch backset and full lip strike.
15) Do Sargent 78-2875 or Sargent 28C-KNOB work as replacements for an Emtek Verve privacy knob?
No. The Verve is a complete tubular knobset with latch and strike for a standard 2-1/8 inch bored door prep. The Sargent 78-2875 is an outside knob only with B design, and the Sargent 28C-KNOB is exit device trim with knob and rose in entrance function for 1-3/4 inch doors. Both are trim that mounts to a Sargent exit device rather than a bored lockset, as is the Imperial USA ED-BKL580 knob trim in storeroom function. For a bored privacy opening, the Dexter C2000 Series Grade 2 privacy ball knob is the closer match.
16) Is there a solid brass knobset in a traditional look rather than the contemporary Emtek Verve?
The Verve knob is a contemporary brass design offered on Disk, Modern, Modern Rectangular, Neos, Square, and Urban Modern rosettes. For a traditional profile in solid brass, Omnia builds the 434/PA egg-shaped knob latchset in passage function with a 3 inch projection and the 458/0 single dummy latchset with a 2-3/8 inch backset. Baldwin's Estate 5011 Colonial passage knob with 5058 rose and the Estate 5077 Bethpage privacy knob with R027 rose are traditional Estate designs, and the 5077 is the one in privacy function.
17) What replaces an Emtek Verve privacy knob on a classroom or storeroom door in a school or facility?
The Verve is a residential non-keyed privacy set, which is not the function a classroom or storeroom opening calls for. The Dexter C2000 Series classroom cylindrical ball knob is Grade 2, keyed, for doors 1-3/8 inch to 1-3/4 inch. For storeroom function, the Sargent 6G04 is a Grade 2 standard duty storeroom/closet knob lock with a single cylinder and the Sargent 8XG04 is a Grade 1 heavy duty storeroom/closet single cylinder knob lock with a 2-3/4 inch backset. The Falcon W101 Grade 2 medium duty passage knob lock is fire rated and comes with a 2-3/4 inch backset.
18) What is the difference between the Emtek Verve privacy knob and a keyless combination knob lock like the Lockey 3830?
The Verve privacy set locks from inside with a thumbturn and has no key or code; it is a non-keyed privacy/bed/bath knobset for doors 1-3/8 inch to 1-3/4 inch. The Lockey 3830 is a mechanical keyless combination knob lock with an auto-locking passage function for doors 1 3/16 inch to 2 inch. The Lockey controls who can enter with a code and is not a bed and bath privacy set; the Verve gives room occupants privacy without managing any credential.
19) Can I use the Emtek Verve privacy knob on a bedroom door where I only need it to latch, not lock?
You would be paying for a thumbturn you never use. Privacy adds the inside lock and the emergency release; a hall or closet door that just needs to stay shut takes a passage set instead. Emtek makes the Verve knob in passage as well. For a lower-cost passage knob, the Dexter C2000 passage or the Bravura Albany round trim passage knobset both cover that opening.
20) I am standardizing knobs across a building. How many Verve privacy combinations do I have to pin down before ordering?
Four decisions per opening: finish (seven choices), rosette (six shapes), latch type (standard, 28 degree rotation, or CF concealed-fastener), and backset (2-3/8 or 2-3/4 inches). Door thickness and any split finish are text entries on the order. Lock those four down once and repeat them across the fleet, since the same knob is offered in other functions and the trim will match door to door.
21) Can an Emtek Verve privacy knob be ordered in satin brass to match existing hardware, and what other brands offer that finish?
The Verve knob privacy set comes in Satin Brass (US4) along with Flat Black (US19), Oil Rubbed Bronze (US10B), Polished Chrome (US26), Polished Nickel Lifetime (US14), Satin Nickel (US15), and Unlacquered Brass (US3NL). Among comparable knobsets, the Bravura Dallas with rectangle trim passage knobset is offered in US4 satin brass and is Grade 2, and the Callan Roland Grade 2 entrance set is offered in US15 satin nickel. Those are passage and entrance functions, so a satin brass privacy opening is matched by the Verve itself rather than by them.
22) For a multi-family unit turn, is there a combo pack alternative to specifying Emtek Verve knobs door by door?
The Verve privacy knobset is configured per opening: finish, rosette, latch type, and 2-3/8 inch or 2-3/4 inch backset are each selected. Where the goal is one carton per unit, the Schlage Residential F500 Plymouth with Georgian knob is a combo pack with adjustable backsets and dual strikes for doors 1-3/8 inch to 1-3/4 inch. The Kwikset 200P-CP Polo passage knob also ships with a round corner adjustable latch and round corner strike. The Verve is specified per door and lets each opening carry its own rosette and finish.
How fast can I get the Emtek 5207.VR.US19 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 5207.VR.US19 come with a warranty?
Absolutely. The Emtek 5207.VR.US19 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 5207.VR.US19?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Emtek 5207.VR.US19 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!