Emtek Modern Designer Brass Leverset - Breslin Lever, Dummy (Pair)

No boring required. The Breslin dummy pair is surface mount, so it screws to the face of the door with no 2-1/8 inch cross bore and no latch prep. That makes it the usual choice for closet doors, French door inactive leaves, and any slab where you want the look of a lever without cutting the door.

It does neither. The Breslin is a non-keyed dummy trim, meaning the lever is fixed and purely decorative, there is no latchbolt and no locking. If you need the door to stay shut, order a passage or privacy function instead and plan on a bored prep.

Because the Breslin lever throws to one side, the handing sets which way the lever points when mounted. Left Hand and Right Hand are both offered. On a pair set, you are getting two levers, so match the handing to the swing of the doors you are trimming.

It is built as residential brass trim, not a graded commercial lockset, so it is not the part for a corridor or a code-driven opening. For dummy trim on a commercial door, look at the BEST 9K Series 1DT single dummy (Grade 1, heavy duty) or the BEST 7KC Series 1DT (Grade 2, medium duty).

The Breslin dummy is configured as a pair, two levers for a double door or both faces of a single slab. If you want a single decorative lever, the Baldwin Estate 5103 half dummy is offered in left hand and right hand versions, or the Callan Bentley BN5051 dummy lever for a lower cost route.

The Emtek Breslin dummy leverset is a residential brass leverset with a dummy function and surface mount. For a heavy duty commercial equivalent, the BEST 9K Series 1DT is a Grade 1 non-keyed single dummy trim cylindrical lever, and the Accentra 455LN Augusta is a Grade 1 heavy duty single dummy cylindrical lever in the 5400 Series. Both are single dummy trim, so a pair of doors or a double door would need two, whereas the Breslin dummy is sold as a complete pair set.

The Emtek Breslin dummy leverset has no latch at all; it surface mounts with no door prep. For a door that needs to latch closed, Baldwin Estate 5103 is offered in a passage version with the 5048 rose, and Bravura Miramar with round trim is a Grade 2 passage leverset available in US4 Satin Brass, which matches one of the Breslin finish options. For a bath or bedroom needing a thumbturn, Baldwin Estate 5103 also comes in a privacy version.

It ships as a complete set: two levers with their rosettes and mounting hardware, sold as a pair. Nothing else is required to hang it since there is no latch or strike involved.

Yes, and it is a real choice, not a fixed part. The Breslin can be ordered on the Disk, Modern, Modern Rectangular, Neos, Square, or Urban Modern rosette, any brass rosette in the line. Square and Modern Rectangular suit a contemporary trim package, Disk and Modern read softer.

Seven finishes: Flat Black (US19), Oil Rubbed Bronze (US10B), Polished Chrome (US26), Polished Nickel Lifetime (US14), Satin Brass (US4), Satin Nickel (US15), and Unlacquered Brass (US3NL). A split finish can be requested when ordering if you want one finish on the hall side and another on the room side. Unlacquered brass will patina over time rather than staying bright.

Within the Emtek brass program, yes, the Breslin dummy is the non-operating match to the same lever design in working functions, and the rosette and finish choices are shared across the line so the trim reads the same door to door. If you are matching a different brand, the Baldwin Estate 5103 is available in dummy, passage, and privacy on the same 5048 rose, which gives you one design across all three functions.

The Breslin dummy leverset is rated for doors 1-3/8 inch to 1-3/4 inch thick. For a 2 inch door, the Hager 2510 Grade 2 passage lever covers 1-3/8 inch to 2 inch, the Falcon K101 Grade 1 passage lock covers 1-3/8 inch to 2-1/4 inch, and Deltana Manchester 6201 entry covers 1-3/8 inch to 2 inch. Note those are latching functions rather than dummy trim.

Not one for one. The Emtek Breslin dummy is sold as a pair, with Left Hand and Right Hand handing options and a choice of Disk, Modern, Modern Rectangular, Neos, Square or Urban Modern rosette. The Baldwin Estate 5103 half dummy is ordered as a single handed lever on a 5048 rose, with separate left hand and right hand part numbers. Two Baldwin half dummies, one of each hand, cover a double door; one Breslin dummy pair order covers both sides.

The Emtek Breslin dummy is a solid brass residential leverset in a contemporary style. If the decorative brass finish is not the driver, the Callan Bentley is a Grade 2 dummy lever and the BEST 7KC Series 1DT is a Grade 2 medium duty single dummy trim cylindrical lever. Both are single dummy trim rather than a matched pair, and neither carries the Breslin brass finish range.

No. The Breslin dummy leverset is non-keyed with a dummy function and no latch, so it cannot secure an opening. For keyed commercial functions, the Dexter C1000 Series offers a Grade 1 classroom lever and a Grade 1 classroom security lever, and the Cal-Royal AG05 is a Grade 2 storeroom lever lockset with a deadlocking latchbolt. The Breslin belongs on doors that are held by other means, such as a closet with a ball catch or the inactive leaf of a pair.

The Breslin dummy is surface mount and requires no door prep, so it does not fill an existing cylindrical bore the way a functioning lockset does. If the opening is already bored, a cylindrical lever that occupies the prep is the cleaner route: the Falcon B101 is a Grade 2 non-handed cylindrical passage lever, and the Accentra 5301LN Augusta is a Grade 2 cylindrical lever in passage/closet function.

The Breslin dummy is a residential brass leverset, so for high traffic commercial openings a heavy duty lever is the safer specification. The Falcon T101 is a Grade 1 heavy duty cylindrical passage lever, and the Corbin Russwin CL3110 is a Grade 1 vandal resistant passage/closet lever that is fire rated and covers 1-3/4 inch to 2 inch doors. The Breslin still suits guest room closet and double door trim where nothing latches.

Brass, both the material and the substrate, from Emtek's brass collection. That matters for the unlacquered brass and satin brass finishes in particular, since the finish lives on a brass base rather than a plated pot metal casting.

The Breslin dummy leverset is non-electronic and non-keyed. For keyless entry on a lever, the Lockey 2835 is a mechanical pushbutton keyless lever lock with passage function and ADA compliance, fitting doors 1-3/16 inch to 2 inch, and the Delaney LP250 is a Grade 2 electronic keypad leverlock. Those are latching, code-controlled sets rather than decorative dummy trim.