Emtek Modern Rectangular Single Point Lockset with Hanover Lever - Single Cylinder

Doors from 1-3/8 to 1-3/4 inches are covered, with 1-3/4 inches supplied as standard. If your door is thicker than 1-3/4 inches, say so on the order and the lockset is built for it. The prep is a standard 2-1/8 inch cross bore, so an existing bored door usually takes it without new drilling.

The latch supplied as standard is 2-3/8 inch backset, and 2-3/4 inch is a selectable option at no change to the product. Measure from the door edge to the center of the bore before ordering. Those are the two backsets used on residential bored doors, so one of them will match your existing prep.

Two keyways are offered on the Hanover leverset: Schlage as standard, and Weiser WR5. The Weiser cylinder carries no upcharge and can be keyed into an existing Weiser system, so a landlord already running Weiser keys across a building can keep one key. Keyed alike or keyed different is a required choice at order, and you can supply an existing key code to have it cut to match.

The Omnia D12036A is the closest Omnia counterpart. It is a single cylinder deadbolt lever lockset in solid brass, matching the Emtek Hanover single point lockset on keyed function - key outside, thumbturn inside - and on brass construction. The lever design and finish range differ between the two families, so confirm the lever shape and finish against the rest of the doors before standardizing an opening on one or the other.

Both are lever locksets on a sideplate with a deadbolt-style single point design in solid brass. The Emtek Hanover single point lockset is a single cylinder entry function, so it takes a key on the outside and a thumbturn on the inside. The Omnia D12036AC is a double cylinder version, which means it is keyed on both sides. Choose the double cylinder Omnia when the opening has glass next to the lock and the job calls for keeping the inside from being turned by hand; choose the single cylinder Emtek Hanover for a solid door where an inside thumbturn is wanted for egress.

Use a dummy set. The Omnia D12036PD is a double dummy lever lockset with plates on a 5-1/2 inch center to center spacing, solid brass, with no latch and no cylinder - it is surface mounted for pull and appearance only. The Emtek Hanover single point lockset is a keyed entry set and needs a cross bore and latch prep, so it is the wrong choice for a leaf that is held by flush bolts and never latches.

This one is a residential entry lockset, brass construction, tubular chassis. For an apartment or house front door it's the right class of hardware. For a high-traffic commercial opening, office suite entry, or anything on a fire-rated door, you want a Grade 1 or Grade 2 commercial cylindrical lockset instead, not a residential tubular set.

Seven finishes: Oil Rubbed Bronze US10B, Polished Nickel US14, Satin Nickel US15, Flat Black US19, Polished Chrome US26, Unlacquered Brass US3NL, and Satin Brass US4. A split finish can be specified as an option, so you can run one finish on the exterior side and a different one inside to match interior hardware. Unlacquered brass is a living finish, it will darken with handling rather than stay bright.

A single point lockset puts the keyed lock and the lever on one sideplate, working a single latch point, so one hole set in the door does the whole job. You don't add a separate deadbolt above it. That's the difference from the usual handleset arrangement where a deadbolt and a knob or lever are two independent locks. If you want the lever on a plate but with a true deadbolt above, the Omnia D12036A single cylinder deadbolt lever lockset is that arrangement.

The Hanover entry set is keyed, so it isn't the part for an inactive leaf or a pull-only door. For a matching plate and lever with no working lock, a double dummy sideplate set such as the Omnia D12036PD does that job, and it's listed at 5-1/2 inch center to center. Order the keyed set for the active leaf and the dummy for the inactive one.

Keying is a required selection, keyed alike or keyed different, and there's a field to key to an existing code. For a property manager standardizing a building, order the whole run keyed alike, or give the code you already carry and have them cut to it. On a Weiser system, choose the WR5 keyway so the new sets fold into the keys already in circulation.

The Emtek Hanover single point lockset is ordered left hand or right hand because it is a working lever lockset and handing is required for leversets. The Omnia D12036PD is a double dummy with plates on both faces and no latch mechanism, so the handing decision that governs the Emtek order does not apply the same way. If the opening needs a live keyed lever, take the Emtek Hanover and confirm the swing at the door before ordering.

No. The Omnia D12036PD is a double dummy, which means the levers are fixed decoration on both faces with no cylinder to key and no bolt to throw. If the door needs to lock, the keyed choices are the Emtek Hanover single point lockset in single cylinder, or the Omnia D12036A single cylinder, or the Omnia D12036AC double cylinder. The Emtek Hanover accepts a Schlage or a Weiser WR5 keyway so it can be keyed into an existing system.

Pair a keyed set on the entry with a dummy on the non-latching door. The Emtek Hanover single point lockset covers the keyed entry in single cylinder, in Oil Rubbed Bronze, Polished Nickel, Satin Nickel, Flat Black, Polished Chrome, Unlacquered Brass and Satin Brass. The Omnia D12036PD is the solid brass double dummy with plates for the door that only needs a pull. Both are brass lever sets on plates, so hold the finish consistent across the two when specifying.

Brass throughout, both the substrate and the material of record. That matters on an exterior door in coastal or wet climate, where zinc or steel components corrode behind the plating and start binding. The styling is contemporary, a rectangular sideplate with a straight lever.

Purely mechanical, key and lever, no electronics and no battery. If you're specifying a keypad or a connected lock for a rental turnover, this isn't that product and there's no add-on module for it.