Emtek Overland Cabinet Knob, Schaub Collection

It is specified as residential hardware. For a single-family renovation, a custom kitchen, or a high-end unit interior it is the right class of product. For a heavy-traffic commercial casework spec, or a large multi-family standardization where you need documented cycle and grade data, look at hardware specified for commercial duty instead. Nothing about a solid brass knob fails in an apartment kitchen, but it is not sold against a commercial rating.

A knob like the Overland takes one hole and one screw, so it drops into an existing single-bore drawer front with no new drilling as long as the old hardware was also a knob. If your drawers currently carry two-hole pulls, switching to knobs leaves a second hole to fill and patch. Going the other way, from knob to pull, you need the center-to-center dimension of the pull to match your existing bore, which a knob does not have. If you are replacing pulls and want to avoid patching, stay with a two-hole pull.

The Schaub 10030 Cafe Modern Oval Slot and the Schaub 10040 Cafe Modern Oval are both 1 inch knobs with a 7/8 inch center to center dimension, meaning they carry a two-point mounting pattern rather than the single mounting screw the Overland uses. If the cabinet doors and drawers are already bored for one hole, those two are not a drop-in swap for the Overland; the Deltana KRB175 or the Schaub 131 Artifex is closer to a like-for-like round knob.

The Deltana KRB175 is published as a heavy-duty round knob in solid brass at 1-3/4 inch diameter. The Emtek Overland is classified for residential use, so for cabinetry in a common area or a hospitality suite that sees constant handling, the KRB175 is the one in the group carrying a heavy-duty designation at a diameter that matches the larger Overland.

Six: Oil Rubbed Bronze (US10B), Polished Nickel (US14), Satin Nickel (US15), Flat Black (US19), Polished Chrome (US26), and Satin Brass (US4). Those US codes are the standard finish designations, so if the rest of the room is already specified in US15 or US10B you can match the Overland to it without guesswork. Oil Rubbed Bronze is a living finish and will change with handling over time.

No. A mounting screw ships with each Overland knob, so you are not sourcing hardware separately. Worth knowing on a remodel: cabinet knob screws come in a standard length that suits typical door and drawer front thickness, and thicker fronts or fronts with an applied panel sometimes need a longer screw than any knob ships with. Check the thickness of what you are drilling before the install day.

The Overland is a transitional design in solid brass, in 1-1/4 and 1-3/4 inch. If you want a comparable brass knob from another brand, ZenSupply carries the Delaney Solid Brass Cabinet Knob and the Deltana KRB175, a heavy-duty solid brass round knob with a groove detail at 1-3/4 inch diameter, which is a direct diameter match to the larger Overland. For a plainer round profile, Orca Hardware's CK-18032 Mission is the round option in that line.

The Overland starts at 1-1/4 inch, so for anything smaller look at a different knob. ZenSupply carries the Schaub 1200 Modo at 16 mm, which is the small modern option, and the Schaub 10040 Cafe Modern Oval at 1 inch. For a larger round knob than the Overland's 1-3/4 inch, the Schaub 131 Artifex is 1-1/2 inch round, so it sits between the two Overland sizes rather than above them.

Oil Rubbed Bronze at 1-1/4 inch is SPC86467US10B. The 1-1/4 inch knob runs on the SPC86467 base with the US finish code appended: US14 polished nickel, US15 satin nickel, US19 flat black, US26 polished chrome, US4 satin brass. The 1-3/4 inch size runs on a different base, SPC86468, so SPC86468US4 is the larger knob in satin brass. Quote the full number including the finish code when you order, since the base alone does not identify a finish.

The Schaub 131 Artifex is a 1-1/2 inch round cabinet knob, which lands between the Overland's two sizes of 1-1/4 inch and 1-3/4 inch. If a run of cabinets needs a round knob at an intermediate diameter, the Artifex covers that dimension while the Overland covers the sizes on either side of it.

The Orca Hardware CK-18032 is a Mission round cabinet knob from the 18-Mission Collection, which suits a Mission or Craftsman elevation more directly than the Overland's Transitional Heritage design. The Orca CK-19032 Whistler is the other cabinet knob in that line if the Mission profile is heavier than the cabinetry calls for.

They are both cabinet knobs, but the Schaub 1200 Modo is a 16 mm knob while the Overland runs 1-1/4 inch and 1-3/4 inch, so the Modo reads as a much smaller point on a door face. Swapping one for the other on an existing run changes the visual scale of the hardware even though both mount as cabinet knobs. For a size closer to the Overland, the Schaub 131 Artifex at 1-1/2 inch round or the Deltana KRB175 at 1-3/4 inch are the nearer matches.

Yes, and that is the usual reason to specify it. The Overland is Emtek cabinet hardware in the same US finish codes Emtek uses on its knobsets and leversets, so a kitchen or butler's pantry can carry one finish across the door lever and the cabinetry. Match on the finish code rather than the finish name, US15 to US15 rather than satin nickel to satin nickel, since names vary between manufacturers.