Emtek Rustic Modern Rectangular Sandcast Bronze Deadbolt With Flap
- Schlage® C Keyway
- Single Cylinder Deadbolt Includes extension collar for thin doors
- Standard Door Prep and Installation
- Solid Brass Cylinder, Housing, Collar, Thumbturn, and Rosette
- Hardened Steel Bolt
- Heavy Gauge Steel Understrike
- Brass Trim Strike Shipped with Every Deadbolt
- Handing Not Required
- Standard door thickness of 1-3/4". Specify if thicker. EMPowered™ fits door thickness up to 2-1/4".
- Standard latch is for 2-3/8” backset. Specify 2-3/4”backset if required.
Weiser® (WR5) Keyway
- Specify by adding “W” to the beginning of product code.
- No upcharge for cylinder substitution. Can be keyed into existing Weiser® system
Specifications:
- Backset: 2-3/8" or 2-3/4"
- Cross Bore: 2-1/8"
- Edge Bore: 1"
- Door Thickness: 1-3/8" to 2"
- Keyway: Schlage C
- Material: Brass
Manufacturer Resources
Product Specs
- Subcategory:
- Deadbolts
- Collection:
- Sandcast Bronze
- Product Type:
- Deadbolts
- Product Group:
- Mechanical Locks
- Product Subgroup:
- Deadbolts
- Commercial/Residential:
- Residential
- Lock Function:
- Deadbolt
- Keyed:
- Yes
- Lock Type:
- Tubular
- Series:
- Rustic Modern Regular
- Theme:
- Rustic Living
- Electronic:
- No
- Handle Type:
- Deadbolt
- Product Attribute:
- Deadbolts
- MAP Policy:
- Yes
- Product Function:
- Cylinder x Thumbturn
- Product Style:
- Sandcast Bronze
- Product Material:
- Bronze
- Product Category:
- Mechanical Locks
- Product Substrate:
- Bronze
- Department:
- Door Hardware
Emtek 8477-FB – Frequently Asked Questions
1) Will the Emtek Rustic Modern Regular sandcast bronze deadbolt fit a standard 1-3/4 inch entry door?
Yes. The Rustic Modern Regular sandcast bronze deadbolt is built for a standard 1-3/4 inch door and covers a range of 1-3/8 to 2 inches. It uses standard door prep: a 2-1/8 inch cross bore and a 1 inch edge bore, so an existing bored door usually takes it without new drilling. If your door is thinner than 1-3/4, the single cylinder version ships with an extension collar to take up the difference. Thicker than standard, call out the actual thickness when you order.
2) What backset do I need to specify on the Emtek Rustic Modern deadbolt, 2-3/8 or 2-3/4?
Both are offered, and backset is a required selection at order. Standard is the 2-3/8 inch latch; specify 2-3/4 inch if that is what your door is bored for. Measure from the door edge to the center of the 2-1/8 inch cross bore and match it. Getting this wrong is the most common reason a deadbolt will not seat, since the two backsets are not field-interchangeable on the same latch.
3) Single cylinder or double cylinder Emtek deadbolt for a door with glass next to it?
Single cylinder gives you a key outside and a thumbturn inside (model 8477 in each finish). Double cylinder takes a key on both sides (model 8377), which is what people put on doors with glass in or beside them so a broken pane does not give access to a turn. Note the tradeoff: a double cylinder needs a key to get out, and many local codes restrict that on a required exit door. Check your jurisdiction before committing to 8377.
4) Can I key this Emtek deadbolt to match the rest of my Schlage keys?
Standard cylinder is Schlage C keyway, so it keys into an existing Schlage C system. If your building runs on Weiser, order the WR5 keyway instead by adding a W to the front of the product code, at no upcharge, and it can be keyed into an existing Weiser system. Keyed alike or keyed different is a required selection at order, and there is a field to give your key code if you have one.
5) Is the Emtek sandcast bronze deadbolt suitable for a commercial entrance or an apartment building?
It is a residential-duty tubular deadbolt, meant for a house or a high-end unit door rather than a graded commercial opening. If you need a graded product for a commercial or multi-family entry, look at a Grade 1 unit like the Accentra D111 or the Design Hardware D1 Series double cylinder, or a Grade 2 like the Hager 3215 or Dexter DB2000. Those are the ones specified when a job calls out an ANSI grade; the Emtek is chosen for the sandcast bronze look.
6) I need a deadbolt that keys to Schlage C but has to be commercial grade. What are my options?
The Emtek Rustic Modern deadbolt uses a Schlage C keyway but is a residential product. For a graded lock on the same Schlage C keying system, the Hager 3115 is Grade 2 cylinder x thumbturn with a Schlage C keyway, the Hager 3214 is the double cylinder version, and the Hager 3118 is a Grade 1 with a Schlage C keyway and a 6-pin cylinder. All three are keyed off the same keyway, so they can go on the same key system as the Emtek units elsewhere in the building.
7) Will this Emtek deadbolt work on my 2 inch thick solid wood door?
Yes, 2 inches is the top of the stated range of 1-3/8 to 2 inches for the Rustic Modern Regular deadbolt. Standard build is set up for 1-3/4 inch, so call out the actual thickness in the door thickness field when you order. Past 2 inches this is the wrong part; a Corbin Russwin DL3011 covers 1-3/4 to 2-1/4 inch doors if you are going thicker.
8) Can I replace an existing deadbolt with the Emtek Rustic Modern without redrilling the door?
Usually yes on a standard bored door. It uses standard door prep, a 2-1/8 inch cross bore and 1 inch edge bore, which is the common residential prep. The two things to confirm on the door you are replacing: the backset, 2-3/8 or 2-3/4, and thickness between 1-3/8 and 2 inches. The rosette diameter may not cover marks left by a larger previous trim, so check the footprint if the old finish is worn into the door.
9) What is a straight equivalent to the Emtek 8477 sandcast bronze deadbolt in a Grade 1 commercial cylinder x thumbturn?
The Emtek Rustic Modern Regular 8477 is a residential tubular deadbolt with a cylinder x thumbturn function and a Schlage C keyway. For the same function in a Grade 1 commercial deadbolt, the Accentra D111 is a single cylinder Grade 1 deadbolt with a 2-3/8 inch backset and a 1-3/8 to 1-3/4 inch door thickness range, and the Dexter DB1000 single cylinder is Grade 1 cylinder x thumbturn covering 1-3/8 to 1-7/8 inch doors. Both keep the key outside and thumbturn inside; what changes is that the Emtek carries sandcast bronze decorative trim and the Emtek is catalogued for residential use.
10) Which deadbolt should I use instead of the Emtek 8377 double cylinder on a commercial opening that needs a Grade 1 double cylinder?
The Emtek Rustic Modern Regular 8377 is the double cylinder version, keyed on both sides, in Flat Black Bronze, Medium Bronze, and Tumbled White Bronze. For a commercial door needing the same key-both-sides function at Grade 1, the Design Hardware D1 Series double cylinder is Grade 1, extra heavy duty, for 1-3/4 inch doors, and the Dexter DB1000 double cylinder is Grade 1 for 1-3/8 to 1-7/8 inch doors. At Grade 2, the Hager 3214 is a double cylinder deadbolt with a Schlage C keyway for 1-3/8 to 1-3/4 inch doors, which matches the Emtek's standard keyway if you are keying the two into one system.
11) I need a keyed deadbolt on a fire rated door - can I use the Emtek Rustic Modern Regular?
The Emtek Rustic Modern Regular is a residential tubular deadbolt. Where the opening requires a fire rating, the Hager 3115 and Hager 3215 are single cylinder deadbolts with a Schlage C keyway carrying a fire rating for 1-3/8 to 1-3/4 inch doors, and the Cal-Royal CRB800 is a heavy duty single cylinder deadbolt with a UL 3-hour fire rated latch. All three run the same cylinder x thumbturn function as the Emtek, and the Hagers share its Schlage C keyway so they can be keyed alike with the Emtek deadbolts elsewhere in the building.
12) My door is thicker than 2 inches - what deadbolt fits when the Emtek Rustic Modern Regular does not?
The Emtek Rustic Modern Regular deadbolt covers a 1-3/8 to 2 inch door thickness, with 1-3/4 inch as standard. For a thicker leaf, the Corbin Russwin DL3011 is a Grade 1 cylindrical deadlock covering 1-3/4 to 2-1/4 inch doors. If the door is at 1-3/4 inch exactly, the Corbin Russwin DL3211 and the Design Hardware D1 Series are both built for that thickness.
13) Is the Arrow E60 a substitute for the Emtek single cylinder deadbolt?
No. The Emtek Rustic Modern Regular 8477 is keyed, with a cylinder outside and a thumbturn inside. The Arrow E60 is a Grade 2 exit deadlock, non-keyed, with a blank plate outside and a thumbturn inside for 1-3/8 to 1-3/4 inch doors, so there is no key access from the exterior at all. The same caution applies to the Corbin Russwin DL2211 and DL3011, which are cylinder x blank - keyed outside with no thumbturn inside. Match the Emtek with a cylinder x thumbturn part such as the Bravura 910005 rectangle single cylinder deadbolt or the Deltana CL200LM Grade 1 single cylinder.
14) What deadbolt takes an interchangeable core instead of the Emtek's Schlage C cylinder?
The Emtek Rustic Modern Regular ships with a Schlage C keyway as standard and can be ordered with a Weiser WR5 keyway, both as fixed cylinders. Where a facility keys on small format interchangeable cores, the Arrow E61 26D IC is a Grade 2 single cylinder deadlock with SFIC prep supplied less core for 1-3/8 to 1-3/4 inch doors, the Deltana CL200LAIC is a Grade 2 single deadbolt with an interchangeable core and a 2-3/4 inch backset, and the Delaney LM Series 301702 is a Grade 1 single cylinder less core deadbolt in dull chrome US26D. Ordering less core lets the locksmith drop in the facility's existing core.
15) I need a classroom function deadbolt for a school - what do I order instead of the Emtek?
The Emtek Rustic Modern Regular is a residential cylinder x thumbturn deadbolt. For a classroom function, the Falcon D111 is a Grade 1 heavy duty classroom deadbolt with an adjustable backset, the Falcon D211 is the Grade 2 medium duty classroom version with single cylinder operation, and the Hager 3118 is a Grade 1 classroom deadbolt with a Schlage C keyway and a 6-pin cylinder for 1-3/8 to 1-3/4 inch doors. The Hager 3118 shares the Emtek's Schlage C keyway if the facility is already on that system.
16) What is actually in the box with the Emtek sandcast bronze deadbolt?
You get the deadbolt with a hardened steel bolt, a heavy gauge steel understrike, and a brass trim strike, which ships with every one of these. The cylinder, housing, collar, thumbturn and rosette are solid brass; the exterior trim is sandcast bronze. The single cylinder version also includes the extension collar for thinner doors. Nothing extra is needed to strike into a standard wood jamb.
17) I'm ordering several Emtek deadbolts for one house. Can they all take the same key?
Yes. Keyed alike is one of the two keying selections and there is no charge for it, so a front, back and side door can all run one key. If you are matching an existing system rather than starting fresh, enter your key code in the keying-to-code field, or switch the cylinder to the Weiser WR5 keyway if that is what the house is already on.
18) Which deadbolt gives me keyless entry instead of the Emtek Rustic Modern Regular?
The Emtek Rustic Modern Regular is a mechanical, non-electronic deadbolt operated by key and thumbturn. For a keyless opening, the Delaney KP400 is a Grade 2 electronic deadbolt with a programmable remote, the Codelocks CL2200 is a medium duty electronic surface deadbolt in brushed steel, and the Codelocks CL200 is a surface deadbolt with mechanical code entry and key override. For credential-based access, the Dormakaba Saffire LX-D is an RFID electronic deadbolt with BLE and electronic lock override, and the Dormakaba Nova-D is an RFID multihousing smart electronic deadbolt.
19) What is a simpler deadbolt than the Emtek 8477 for a rental unit where I just need a working single cylinder?
The Emtek Rustic Modern Regular 8477 is a sandcast bronze single cylinder deadbolt built for a decorative entry. Where the trim does not matter, the Cal-Royal ED500 is a Grade 3 single cylinder deadbolt with an adjustable backset for 1-3/8 to 1-3/4 inch doors, so one part covers both 2-3/8 and 2-3/4 inch bores instead of specifying the backset up front as the Emtek requires. The Brinks Raleigh E2401 is a transitional round single cylinder deadbolt with a 4-way adjustable backset, and the Bravura 310B Elite is a Grade 2 traditional round cylinder x thumbturn deadbolt. All three carry the same cylinder-outside, thumbturn-inside function as the 8477.
20) I want a decorative bronze deadbolt but need a square or contemporary look instead of the Rustic Modern rectangular flap - what else is there?
The Emtek Rustic Modern Regular deadbolt is a sandcast bronze rectangular design with a keyhole flap, offered in Flat Black Bronze, Medium Bronze, and Tumbled White Bronze. For a different decorative shape at the same cylinder x thumbturn or double cylinder function, the Baldwin Reserve Double Cylinder Contemporary Square and Contemporary Round deadbolts are both double cylinder, the Baldwin Estates 8011 is a contemporary 1-5/8 inch double cylinder deadbolt, and the Bravura 310SC Elite and 310RC Elite are Grade 2 contemporary square and round cylinder x thumbturn deadbolts.
21) The Emtek needs a full cross bore and edge bore - what deadbolt works on a door I cannot bore through?
The Emtek Rustic Modern Regular takes a standard door prep with a 2-1/8 inch cross bore and a 1 inch edge bore straight through the door. Where you cannot bore through, the Callan Model 205S is a Grade 3 one-sided half-bore deadbolt, and the Codelocks CL200 is a surface mounted deadbolt with key override that fastens to the face of the door rather than through it.
22) Does the Arrow 460 strike replace the strike that comes with the Emtek deadbolt?
No. The Emtek Rustic Modern Regular ships with a brass trim strike and a heavy gauge steel understrike sized for its tubular bolt. The Arrow 460 is a mortise lock strike for latchbolt and deadbolt functions with a straight lip, cut for a mortise lock case rather than a tubular deadbolt, so the frame prep is different. Likewise the BEST 8T is a tube component for the T Series tubular deadbolt, not a complete deadbolt, and the Baldwin 8BR0618001 is a deadbolt spacer rather than a lock.
23) Which single cylinder deadbolt comes standard with a 2-3/4 inch backset rather than requiring me to specify it like the Emtek?
The Emtek Rustic Modern Regular ships with a 2-3/8 inch backset latch as standard and the 2-3/4 inch backset must be specified at order. If the existing bore is at 2-3/4 inches, the Deltana CL200LA is a Grade 2 single deadbolt built to a 2-3/4 inch backset, and the Deltana CL200LAIC is the same at 2-3/4 inches with an interchangeable core. Where the bore location is uncertain, the Cal-Royal ED500 and the Brinks Mendocino E2402 both use an adjustable backset that covers either position.
24) I need an ADA friendly thumbturn - is there an alternative to the Emtek Rustic Modern Regular thumbturn?
The Emtek Rustic Modern Regular uses a solid brass thumbturn on the interior of the single cylinder version. Where the facility needs an easier grip, the Cal-Royal LSD is a Grade 3 single cylinder deadbolt with an ADA ergonomic thumbturn for 1-3/8 to 1-3/4 inch doors, running the same cylinder x thumbturn function as the Emtek 8477.
25) What double cylinder deadbolt other than the Emtek 8377 covers a 1-3/8 to 2 inch door range?
The Emtek Rustic Modern Regular 8377 double cylinder covers 1-3/8 to 2 inch doors. The Deltana 7312KA2 is a Grade 3 heavy duty double cylinder deadbolt with the same 1-3/8 to 2 inch range. For narrower ranges, the Dexter DB2000 double cylinder is Grade 2 for 1-3/8 to 1-3/4 inch doors, the Callan 210S is a Grade 3 double cylinder, and the Delaney LU Series 320601 is a Grade 2 double cylinder in stainless steel US32D.
How fast can I get the Emtek 8477-FB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 8477-FB come with a warranty?
Absolutely. The Emtek 8477-FB is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 8477-FB?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Emtek 8477-FB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.