Emtek Sandcast Bronze Leverset...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$275.00
$224.87
Emtek Emtek Sandcast Bronze Leversets - Cimarron Lever, Passage Set EMTEK-SANDCAST-BRONZE-LEVERSETS-CIMARRON-PASSAGE

Emtek Sandcast Bronze Leversets - Cimarron Lever, Passage Set

(No reviews yet) Write a Review

Model: 7108.CR.RH.FB
From the Sandcast Bronze Collection
$275.00
$224.87
Selected Latch is
Selected Rosette is
Selected Handing is
Selected Finish is
Selected Backset is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$275.00
$224.87
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Emtek Sandcast Bronze Leversets - Cimarron Lever, Passage Set

  • Can be ordered with any Sandcast Bronze rosette
  • Sold as complete set. Includes Latch and Strike Plate
  • 28 Degree Latch (included when CF Mechanism is selected)
  • Fits any door between 1-3/8” to 2-1/4" thick with a 2-1/8" bore standard door prep*
  • Standard latch is for 2-3/8" backset. Specify 2-3/4" backset if required

* STRETTO rosette requires a 1-1/4” diameter bore hole and 2-hole door preparation for thumbturn privacy


 

Specifications:

  • Backset: Adjustable 2-3/8" or 2-3/4"
  • Cross Bore: 2-1/8"
  • Door Thickness: 1-3/8" to 1-3/4"
  • Latch Faceplate: Round or Square Corner
  • Material: Brass

Product Specs

Subcategory:
Leversets
Collection:
Sandcast Bronze
Product Type:
Leversets
Product Group:
Mechanical Locks
Product Subgroup:
Bored Locksets
Commercial/Residential:
Residential
Handle Type:
Lever
Lock Type:
Tubular
Series:
Cimarron
Theme:
Rustic Living
Electronic:
No
Keyed Function:
Non-Keyed
Keyed:
No
Lock Function:
Passage
Product Attribute:
Cylindrical Locks
MAP Policy:
Yes
Product Function:
Passage/Hall/Closet
Product Style:
Sandcast Bronze
Product Material:
Bronze
Product Category:
Mechanical Locks
Product Substrate:
Bronze
Department:
Door Hardware

Emtek 7108.CR.RH.FB – Frequently Asked Questions

1) Will the Emtek Cimarron passage lever fit a 1-3/4 inch door with a standard 2-1/8 inch bore?
Yes. The Cimarron sandcast bronze passage set drops into a standard 2-1/8 inch cross bore and covers doors from 1-3/8 inch up to 2-1/4 inch thick. That range takes in both the 1-3/4 inch commercial-weight door and the 1-3/8 inch older interior door without any special prep. One caveat on prep: the STRETTO rosette is the exception, needing a 1-1/4 inch diameter bore and a 2-hole preparation.
2) Do I need to know the backset before ordering an Emtek Cimarron lever set?
Yes, backset is a required selection. The Cimarron passage set ships with a 2-3/8 inch latch as standard, and 2-3/4 inch has to be specified at the time of order. Measure from the door edge to the center of the bore hole before you order: shallower bores on residential doors are usually 2-3/8, and 2-3/4 turns up more on heavier or commercial-prep doors. The latch itself is adjustable between the two.
3) Is the Emtek Cimarron lever handed, and how do I tell left from right?
Handing matters here. The Cimarron is ordered as Left Hand or Right Hand, so you have to determine handing before the order goes in. Stand on the outside of the door (the side you push from into the room); if the hinges are on your left it is left hand, if on the right it is right hand. Get it wrong and the lever points uphill.
4) What comes in the box with an Emtek Cimarron passage set, and what else do I have to buy?
It is a complete set: both levers, the rosettes you select, the latch, and the strike plate. Nothing else is required to hang it on a prepped door. What you do have to decide on the order is the rosette style (#1, #2, #3, #4, or #6), the finish, the handing, the backset, and which latch mechanism. Latch faceplates come round corner or square corner, so match that to the existing mortise in the door edge if you are replacing hardware.
5) Will an Emtek Cimarron lever replace a Kwikset passage lever already in my door?
On prep, generally yes. A Kwikset passage set like the 200BRNL Breton sits in the same 2-1/8 inch cross bore at 2-3/8 or 2-3/4 backset and covers 1-3/8 to 1-3/4 inch doors, and the Cimarron takes that same bore and spans 1-3/8 to 2-1/4 inch. The rosette diameter is the thing to check: if the old rose was larger than the Emtek rosette you pick, you may see witness marks or finish shadow on the door face.
6) What is the closest equivalent to the Emtek Cimarron passage leverset if the door needs a commercial grade rating?
The Cimarron passage lever is a residential tubular passage set in sandcast bronze, so it carries no ANSI grade. For an opening that has to show a grade on the submittal, the Falcon K101 is a Grade 1 non-handed passage cylindrical lock rated for 1-3/8 inch to 2-1/4 inch doors and fire rated, and the Corbin Russwin CL3110 is a Grade 1 vandal resistant passage/closet lever, fire rated, for 1-3/4 inch to 2 inch doors. Both keep the same passage function - latch only, no lock - while meeting a heavy duty spec the decorative bronze set is not built for.
7) Which passage leverset should I use on a door thicker than 1-3/4 inches?
The Cimarron passage set is specified for doors 1-3/8 inch to 1-3/4 inch with a 2-1/8 inch cross bore. For thicker stock, the Falcon K101 Grade 1 passage lock covers 1-3/8 inch to 2-1/4 inch, the Hager 2510 Grade 2 Withnell passage lever covers 1-3/8 inch to 2 inch, and the Corbin Russwin CL3110 Grade 1 passage/closet lever covers 1-3/4 inch to 2 inch. All three are non-keyed passage function, so the door swings the same way as it would with the Cimarron.
8) I need the same Cimarron lever look on a door that has to lock - what do I order instead?
The Cimarron passage set is non-keyed with a passage function, so it latches but never locks. When the opening needs to secure, the comparable set offers function-matched levers in other lines: Baldwin Estate 5103 in privacy for a bed or bath, Hager 2580 Grade 2 storeroom with the Withnell lever, Cal-Royal AG05 Grade 2 storeroom with a deadlocking latchbolt for 1-3/8 inch to 1-3/4 inch doors, and Dexter C1000 Grade 1 entry/office for 1-3/8 inch to 1-3/4 inch doors. Match the backset when you order - the Cimarron ships a 2-3/8 inch latch standard with 2-3/4 inch available.
9) Is a dummy lever the same as the Cimarron passage set?
No. The Cimarron passage set is sold complete with a working latch and strike plate, so the lever retracts a latch. A dummy lever is surface mounted trim with no latch at all - the Baldwin Estate 5103 half dummy comes handed left or right, the BEST 9K 1DT is a Grade 1 heavy duty single dummy trim, the BEST 7KC 1DT is the Grade 2 medium duty equivalent, and the Accentra 455LN Augusta is a Grade 1 single dummy. Use a dummy on the inactive leaf of a pair or on a ball-catch door; use the passage set anywhere the door needs to latch shut.
10) What is the CF mechanism option on Emtek sandcast bronze leversets?
CF is the concealed fastener build: the rosettes mount with no exposed screws on the face, so the trim reads clean from both sides. Choosing CF also brings the 28 degree rotation latch with it, so you do not order that separately. The other two paths are the standard latch, or the 28 degree latch on its own with conventional through-bolted rosettes.
11) What finishes does the Emtek Cimarron sandcast bronze lever come in, and can I mix them?
Three: Flat Black Bronze (FB), Medium Bronze (MB), and Tumbled White Bronze (TWB). These are sandcast bronze, so the surface varies piece to piece rather than plating out uniform, which is the point of the finish. If you want one side of the door in a different finish from the other, there is a split finish option to note on the order.
12) Can I use the same Cimarron lever on every door in the house and just change the function?
The Cimarron lever and any Emtek sandcast bronze rosette can be ordered together, so the trim carries across an opening plan. Use the passage set on halls and closets, and pair it with the privacy version on bedrooms and baths and a keyed entry version at the exterior. What stays constant is the lever design, the rosette, and the finish, so the doors match even though the mechanisms differ.
13) What is a decorative alternative to the Emtek Cimarron passage lever if I want a different look?
For the same rustic-leaning decorative bracket, the Baldwin Estate 5103 passage lever with the 5048 rose is the closest cross-brand equivalent, and it has matching privacy and half dummy versions (left and right hand) so a whole floor can be trimmed out consistently. If you want the look for less mechanism, the Bravura Miramar and Atlanta passage leversets with round trim are Grade 2, and the Bravura Tampa gives you the same in square trim. None of those are sandcast bronze; the Cimarron's cast surface is what you give up.
14) I need a matching non-latching lever for a closet door that does not need a latch. Does the Cimarron passage set work?
No, the passage set always includes a working latch and strike, so it is not the part for a false or inactive leaf. For that you want a dummy trim, which mounts to the face and does not operate. Cross-brand dummy levers we carry include the Baldwin Estate 5103 half dummy in left or right hand, the Callan Bentley Grade 2 dummy, and the BEST 7KC single dummy trim.
15) What is the difference between the Emtek Cimarron passage lever and a Kwikset passage lever?
Both are non-keyed residential passage levers for hall and closet doors. The Kwikset 200BRNL Breton is a Grade 3 passage lever set for 1-3/8 inch to 1-3/4 inch doors, and the Kwikset 200DL Delta passage lever ships with an adjustable 6AL latch and RCS strike; the 200DL-RCALFD version uses a round corner adjustable 20 minute UL latch with a round corner strike. The Cimarron covers the same 1-3/8 inch to 1-3/4 inch range with a 2-1/8 inch cross bore, is built in sandcast bronze, and is ordered by handing, rosette, and finish in Flat Black Bronze, Medium Bronze, or Tumbled White Bronze.
16) What is a decorative alternative to the Emtek Cimarron passage lever for a residential hall or closet door?
The Baldwin Estate 5103 Passage Lever with 5048 Rose is the closest decorative peer - same passage/hall/closet function in a designer residential lever with a matching rose. Bravura also builds passage leversets in several trim styles: the Miramar with round trim in US4 satin brass, the Atlanta and Orlando with round trim, and the Tampa with square trim, all Grade 2. The Cimarron's differentiator is its sandcast bronze construction, offered in Flat Black Bronze, Medium Bronze, and Tumbled White Bronze, with a choice of five rosettes.
17) What is a simpler passage lever to standardize on across a building instead of the Cimarron?
The Cimarron is a handed sandcast bronze set - each opening has to be ordered left hand or right hand with a chosen rosette and latch style. For fleet standardization where a single SKU should fit every door, the Falcon B101 is a Grade 2 medium duty passage lever with a non-handed design, and the Falcon K101 is the Grade 1 non-handed passage equivalent. The Accentra 5301LN Augusta Grade 2 and 4601LN Grade 2 are passage/hall/closet levers in the 5300 and 4600 series, and the Design Hardware J75 Grade 2 and X75 Grade 1 are flat lever passage locksets for 1-3/4 inch doors.
18) Which lever should I use if the opening needs keyless code entry rather than a passage function?
The Cimarron is a non-electronic mechanical passage set, so it has no code entry. For a keypad opening, the Lockey 1150 is a heavy duty mechanical keypad lever set with double combination and passage function for 1-1/8 inch to 2 inch doors, the Lockey 1150S adds an adjustable backset over the same thickness range, and the Lockey 2835 is a mechanical pushbutton keyless lever with passage function and ADA compliance for 1-3/16 inch to 2 inch doors, with the 2835DC offering double combination. The Delaney LP250 is an electronic keypad leverlock at Grade 2.
19) Can I substitute a knob lockset for the Cimarron passage lever on an ADA opening?
No - a knob and a lever are not interchangeable where lever operation is required. The Cimarron is a lever handle set. Knob products in the same cylindrical family, such as the Arrow MK02-TA Tudor knob privacy lock and the Arrow HK11 ball knob entrance lock, use a knob trim and a different function entirely, so neither is a like-for-like swap for a passage lever. If a lever is required but the Cimarron does not suit the door, stay with a passage lever such as the Falcon B101 Grade 2 or Hager 2510 Grade 2.
20) What does the 28 degree latch on Emtek leversets actually change?
It is the rotation of the lever needed to pull the latch. A 28 degree latch retracts with a shorter throw of the handle than a standard latch, which suits the heavier cast bronze levers and feels lighter in the hand. You can order it on its own or get it bundled with the CF concealed-fastener mechanism. The standard latch is the third option if you are matching the feel of existing Emtek hardware in the building.
21) Is the Emtek Cimarron lever solid bronze or plated?
The lever and rosettes are sandcast bronze, cast rather than plated, and the latch hardware is brass. Cast bronze takes surface variation and develops a patina with handling, which is the intent of the Flat Black, Medium, and Tumbled White finishes rather than a defect. If you need a uniform machined look across an opening, this collection is the wrong choice.
How fast can I get the Emtek 7108.CR.RH.FB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 7108.CR.RH.FB come with a warranty?
Absolutely. The Emtek 7108.CR.RH.FB is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 7108.CR.RH.FB?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Emtek 7108.CR.RH.FB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!