Emtek Sandcast Bronze Leversets - Lariat Lever, Dummy (Pair)

No latch, no moving mechanism. The Emtek Lariat dummy lever pair is fixed trim: the lever is rigid, it does not turn and it does not retract anything. You use it as a pull on doors that hold shut some other way, closet and pantry doors with a roller or magnetic catch, false or inactive leaves of a double door, and the inactive half of a French pair. If you need the handle to actually operate a latch, this is the wrong function and you want a passage set instead.

No boring. The Lariat dummy mounts to the door surface with no door prep required, so it goes onto a slab that was never drilled for a lockset. That is the practical difference between the dummy and the working functions: a passage or privacy set needs a 2-1/8 inch cross bore and an edge bore, this one just needs screws into the face of the door.

The lever throw is cast in one direction, so the Lariat dummy is ordered Left Hand or Right Hand. Pick it by which way the lever should sweep down, which follows the side of the door your hinges are on and which face you stand on. Both hands are offered in all three finishes. On a pair of doors where both leaves are dummies, people usually order one LH and one RH so the levers mirror each other, and that is what the optional comments field on the order is for.

Both. Door thickness range is 1-3/8 inch to 1-3/4 inch, which covers the usual interior slab at 1-3/8 and the heavier 1-3/4 door. Since it surface mounts rather than passing through the door, thickness is about the trim sitting flat, not about a spindle length.

It is a residential lever, and that is the honest place to use it: houses, condo interiors, model homes, high-end multifamily where the look matters. For a commercial corridor, a school, or anywhere you need a Grade 1 dummy trim on a bored prep, look at the BEST 9K Series 1DT single dummy trim, which is Grade 1 heavy duty, or the BEST 7KC Series 1DT at Grade 2 medium duty. The Accentra 455LN Augusta is another Grade 1 single dummy lever.

The Emtek Lariat sandcast bronze set is a dummy-function lever pair in bronze, sold non-keyed and surface mounted with no door prep. The nearest decorative-brand equivalent is the Baldwin Estate 5103 half dummy lever with 5048 rose, which is also a dummy-function lever and is handed the same way, offered as a left hand version and a right hand version. The Baldwin is a half dummy, meaning one lever for one side of the door, so two are needed to dress both faces the way the Lariat pair does.

A dummy lever has no locking mechanism at all. For bed and bath, a privacy function lever is the part. The Baldwin Estate 5103 privacy lever with 5048 rose holds the same 5103 lever and 5048 rose design in a privacy function, the Kwikset 300BRNL Breton privacy lever set is Grade 3 with a 1-3/8 to 1-3/4 inch door thickness range, and the Arrow MK02-TA is a privacy cylindrical lock with a fire rating, though it uses a Tudor knob rather than a lever.

A dummy lever is fixed trim; it does not retract a latch. For a door that has to latch, a passage function lever is the correct part. The Baldwin Estate 5103 passage lever with 5048 rose keeps the same 5103 lever and 5048 rose styling in a passage function, and the Callan Asheville is a Grade 3 passage leverset. For a heavier commercial opening, the Falcon K101 is a Grade 1 passage cylindrical lock with non-handed levers and a 1-3/8 inch to 2-1/4 inch door thickness range.

The Emtek Lariat sandcast bronze dummy pair is a residential bronze lever set. When a facility spec calls for a graded dummy trim, the BEST 9K Series 1DT single dummy trim is a Grade 1 non-keyed heavy duty dummy lever, and the BEST 7KC Series 1DT single dummy trim is a Grade 2 medium duty dummy. The Accentra 455LN Augusta is a heavy duty Grade 1 single dummy cylindrical lever in the 5400 Series, and the Callan Bentley is a Grade 2 dummy lever.

One order gets you a pair, sold as a complete set, so a lever and rosette for each face. That covers a single door you want handled on both sides. A double door where each leaf takes a lever on both faces needs two sets. Nothing else is required to hang it since there is no latch or strike involved, though the door still needs its own catch or ball catch to stay closed.

Five rosettes, numbered 1 through 6 excluding 5, and any Sandcast Bronze rosette can be ordered with the Lariat lever. That is the reason to buy into this collection: if the other doors in the house already wear a #2 or a #4 rose, you order the dummy on the same rose and it reads as one suite of hardware. All five rosettes are available in each of the three finishes and in both hands.

Three: Flat Black Bronze (FB), Medium Bronze (MB), and Tumbled White Bronze (TWB). These are sandcast bronze finishes, so the surface carries the texture and tone variation of the casting rather than a uniform plated look, and pieces will differ slightly from one another. If you are matching to existing Emtek Sandcast Bronze on other doors, order the same finish code rather than matching by eye.

The Emtek Lariat sandcast bronze dummy is sold as a pair, giving a lever on both faces of the door. The BEST 9K Series 1DT and the BEST 7KC Series 1DT are single dummy trims, and the Baldwin Estate 5103 half dummy is likewise one side. Single and half dummy trims dress one face only, so a double door or a swinging door that shows both faces needs two of them to match what the Lariat pair covers in one order.

The Emtek Lariat sandcast bronze dummy pair covers 1-3/8 inch to 1-3/4 inch doors. For thicker stock, the Deltana 6201 Manchester, 6411 Morant and 6431 Linstead lever entry sets all cover 1-3/8 inch to 2 inch, the Hager 2510 passage lever covers 1-3/8 inch to 2 inch, and the Falcon K101 passage lock reaches 1-3/8 inch to 2-1/4 inch. Those are latching functions rather than dummy trim.

No. The Emtek Lariat sandcast bronze lever pair is non-keyed dummy trim with no cylinder. A keyed entry opening takes an entrance function lever such as the Deltana 5851 Claremont or 6201 Manchester lever entry, the Hager 2525 Grade 2 commercial cylindrical entry lock, the Cal-Royal AG00 entrance lever with a 6-pin Schlage C keyway and 2-3/8 inch backset, or the Master Lock RL Series Grade 3 keyed entry lockset.

They are not interchangeable. The Emtek Lariat sandcast bronze dummy pair is fixed and surface mounted with no door prep required. A passage lever such as the Bravura Atlanta, Orlando or Tampa Grade 2 passage leverset, or the Accentra 5301LN Augusta Grade 2 passage lever in the 5300 Series, turns to retract a latch and needs a bored door with a latch and strike. Ordering a passage set for a closet door already fitted with dummy trim means preparing the door.

The Emtek Lariat sandcast bronze dummy pair is ordered as left hand or right hand. If handing is a risk on a mixed order, the Falcon B101 Grade 2 passage lever and the Falcon K101 Grade 1 passage lock both use a non-handed design, and the Kwikset 200DL Delta passage lever is reversible with an adjustable 6AL latch and RCS strike. Those are passage locks, not dummy trim.

The Emtek Lariat sandcast bronze dummy pair is a residential decorative lever pair. Where a fire rated opening is involved, the Falcon K101 Grade 1 passage lock and the Corbin Russwin CL3110 Grade 1 vandal resistant passage lever, which covers 1-3/4 inch to 2 inch doors, both carry a fire rating. The Kwikset 200DL-RCALFD Delta passage lever uses a round corner adjustable 20 minute UL latch.

Yes, split finish is an option on the Lariat dummy and you specify it as a note on the order. Useful when you are matching a rose to existing trim on the door while the lever picks up a different metal in the room. If you do not ask for it, the set ships all one finish.

Bronze, sandcast. It is a cast bronze body rather than a stamped or plated zinc handle, which is why the finish is part of the metal and why the texture varies piece to piece. That also means the lever is heavy in the hand, which is usually the point when someone specifies Sandcast Bronze for a rustic or timber-frame interior.

Neither. It is non-keyed and non-electronic, with no cylinder, no keyway, and no prep for either. There is nothing to key alike into an existing system and nothing to power. If the opening needs to lock, this is not the part.

The Emtek Lariat sandcast bronze dummy pair is non-electronic fixed trim. For keyless access, the Lockey 2835 mechanical pushbutton keyless lever lock is a passage function set that is ADA compliant and covers 1-3/16 inch to 2 inch doors, the Lockey 2835DC adds a double combination over the same thickness range, and the Lockey 1150 heavy duty mechanical keypad lever set covers 1-1/8 inch to 2 inch. The Delaney LP250 is an electronic keypad leverlock at Grade 2.

The Emtek Lariat is a sandcast bronze lever set with a bronze substrate. Among peers, the Cal-Royal AUS00 entrance/office lever is a Grade 3 lock with a solid brass forged body covering 1-3/8 inch to 1-3/4 inch doors, and the Bravura Miramar passage leverset with round trim is offered in a US4 satin brass finish at Grade 2. Both are latching functions, so they change what the door does as well as what it is made of.