Emtek SELECT Brass R-Bar Straight Knurled Lever - Dummy Set

No door prep at all. The Straight Knurled dummy set is surface mount, so there is no 2-1/8 inch cross bore and no latch mortise to cut. It screws to the face of the door, which is why it works on slabs already hung, on thin closet doors, and on the inactive leaf of a pair where you do not want to cut a bore into an existing door.

Handing here is purely which way the lever points. The Straight Knurled dummy comes as Left Hand (LH) or Right Hand (RH), and since a dummy is fixed, the handing decides whether the lever sweeps toward the hinge side or the strike side once it is mounted. Match it to the lever on the door beside it. On a pair of French doors people usually order one LH and one RH so the two levers mirror each other.

Four choices. Finish, from Flat Black (US19), Oil Rubbed Bronze (US10B), Polished Chrome (US26), Polished Nickel Lifetime (US14), Satin Brass (US4), Satin Nickel (US15), or Unlacquered Brass (US3NL). Handing, LH or RH. Rosette, from Disk, Modern Rectangular, Quincy, Square, Urban Modern, Watford, or Wilshire. The lever is Straight Knurled and the stem is R-Bar, which are fixed on this set. It ships as a complete set, so no separate rose or trim order is needed.

It is a residential set. Emtek classes the SELECT Straight Knurled lever as residential, and it carries no ANSI grade on record, so it is not the part for a corridor, a school, or anywhere a spec calls for a graded cylindrical lock. For a commercial dummy in the same lever format, the BEST 9K Series 1DT single dummy trim is Grade 1 heavy duty, and the BEST 7KC Series 1DT is Grade 2. The Accentra 455LN Augusta is another Grade 1 single dummy lever.

You want a passage set. The Straight Knurled dummy has no latch, so if the door needs to hold closed on its own, look at a passage function lever: on the residential decorative side the Baldwin Estate 5103 comes in a passage version with the 5048 rose, and the Bravura Miramar with round trim is a Grade 2 passage leverset. For a bedroom or bath that needs a thumbturn, the Baldwin Estate 5103 also comes in privacy function.

The Emtek SELECT Brass R-Bar Straight Knurled lever is a dummy-function set in brass, catalogued for residential use. Where a commercial spec calls for a certified dummy trim, the BEST 9K Series 1DT single dummy trim cylindrical lever lock is a Grade 1 heavy duty non-keyed dummy, and the BEST 7KC Series single dummy trim is a Grade 2 medium duty dummy. The Accentra 455LN Augusta is a heavy duty Grade 1 single dummy cylindrical lever lock in the 5400 Series. All three carry the same dummy function - a pull with no latch - while the Emtek is the brass decorative route with seven finishes and seven rosette styles.

The Emtek SELECT Brass R-Bar Straight Knurled lever is dummy function only, so it has no latch and no door prep. On the doors in the same run that need a latching lever, the Baldwin Estate 5103 lever is offered in matching dummy, passage and privacy versions on the 5048 rose - 5103 half dummy in left and right hand, 5103 passage, and 5103 privacy - so a hall door, a bath door and a closet false door can carry one lever design across all three functions.

Anything sold as passage function is the common mix-up. The Accentra 5301LN Augusta Grade 2 and the Accentra 4601LN Grade 2 are passage/hall/closet levers, the Falcon B101 Grade 2 and Falcon K101 Grade 1 are passage levers, and the Bravura Atlanta, Orlando and Tampa are all Grade 2 passage leversets. A passage lever turns and retracts a latch and requires a bored door; the Emtek SELECT R-Bar Straight Knurled set is dummy function, surface mount with no door prep, and is fixed - it pulls the door but does not operate a latch.

The Emtek SELECT Brass R-Bar Straight Knurled dummy set is built for doors 1-3/8 inch to 1-3/4 inch. On a 2 inch door, levers rated to that thickness include the Hager 2510 Grade 2 passage lever at 1-3/8 inch to 2 inch, the Dexter C1000 Series asylum lock at 1-3/8 inch to 2 inch, and the Deltana 6201 Manchester lever entry at 1-3/8 inch to 2 inch. The Falcon K101 Grade 1 passage lever covers 1-3/8 inch to 2-1/4 inch. Those are latching functions rather than dummy trim, so on a thick door needing a fixed pull, verify thickness before committing.

Yes, within the SELECT Brass range. The R-Bar Straight Knurled lever can be ordered on any of the brass rosettes, and the choices run Disk, Modern Rectangular, Quincy, Square, Urban Modern, Watford, and Wilshire. That is how you keep a dummy on the closet reading the same as the working sets on the rest of the floor: pick the rosette shape already on those doors and order the dummy with it.

Brass, both as the stated material and as the substrate underneath the finish. That matters most on Unlacquered Brass (US3NL), which is a living finish that will darken and patina with handling rather than staying bright. If you want it to hold its look, the plated and coated options are Flat Black, Oil Rubbed Bronze, Polished Chrome, Polished Nickel Lifetime, Satin Brass, and Satin Nickel.

The Baldwin Estate 5103 half dummy lever with the 5048 rose is the nearest peer in the decorative residential range, and it is ordered handed the same way, as a left hand or a right hand half dummy. Difference in shape: the Emtek is a straight knurled bar lever on an R-Bar stem, one of seven rosette shapes; the Baldwin comes on the 5048 rose only.

It is sold as a complete set, so the lever, stem, and the rosette you choose all come together. Order one set per lever face you need. A pair of French doors where you want a lever on each leaf takes two sets, and most people order those one LH and one RH so the levers mirror.

The Emtek SELECT Brass R-Bar Straight Knurled dummy set is ordered left hand or right hand, so the door swing has to be confirmed before the order goes in. Among dummy peers, the Baldwin Estate 5103 half dummy is likewise handed and stocked as separate left hand and right hand items. The Accentra 455LN Augusta and the BEST 9K Series 1DT are single dummy trims, and the BEST 7KC Series is a single dummy trim as well.

The Emtek SELECT Brass R-Bar Straight Knurled set is a brass dummy in the SELECT Series, ordered by finish, rosette and handing. Where a property manager wants fewer choices to make across a unit turn, the Callan Bentley Grade 2 dummy lever is a straightforward dummy, and for the doors that need to latch the Kwikset 200BRNL Breton Grade 3 passage lever covers 1-3/8 inch to 1-3/4 inch doors and the Kwikset 300BRNL Breton Grade 3 privacy lever covers the same range for baths and bedrooms.

The Emtek SELECT Brass R-Bar Straight Knurled set is non-keyed dummy trim, so it is not an entry lock. For a keyed opening, the Cal-Royal AG00 entrance lever is Grade 2 with a 6-pin Schlage C keyway and 2-3/8 inch backset on 1-3/8 inch to 1-3/4 inch doors, the Cal-Royal AG05 is a Grade 2 storeroom lever with a deadlocking latchbolt on the same thickness range, and the Dexter C1000 Series entry/office lever is Grade 1 clutching and keyed for 1-3/8 inch to 1-3/4 inch doors. The Emtek stays on the inactive leaf or the closet face where no locking is wanted.

The Emtek SELECT Brass R-Bar Straight Knurled set is residential dummy trim. Where the opening is rated, peers that carry a fire rating include the Corbin Russwin CL3110 Grade 1 vandal resistant passage/closet lever for 1-3/4 inch to 2 inch doors and the Falcon K101 Grade 1 heavy duty passage lever for 1-3/8 inch to 2-1/4 inch doors. Both are passage function with a working latch, which a rated assembly generally requires in place of fixed dummy trim.

Both are dummy-function levers. The Emtek SELECT Brass R-Bar Straight Knurled is a brass set built around the Straight Knurled lever on an R-Bar stem, ordered with any of seven brass rosettes including Disk, Square, Quincy, Watford, Wilshire, Modern Rectangular and Urban Modern, in seven finishes, and sold as a complete set for 1-3/8 inch to 1-3/4 inch doors with no door prep. The Baldwin Estate 5103 half dummy pairs its lever with the 5048 rose and is ordered as a specific left hand or right hand item. The Emtek is the route when the rosette shape has to match other hardware in the room.