Emtek STUDIO Brass Knobsets - ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$340.00
$277.92
Emtek Emtek STUDIO Brass Knobsets - The Spoke Knob - Passage EMTEK-STUDIO-BRASS-KNOBSETS-SPK-PASSAGE

Emtek STUDIO Brass Knobsets - The Spoke Knob - Passage

(No reviews yet) Write a Review

Model: 5109.SPK.US19
From the STUDIO Brass Collection
$340.00
$277.92
Selected Concealed Fastener (CF) Mechanism is
Selected Rosette is
Selected Finish is
Selected Backset is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$340.00
$277.92
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Emtek Studio Brass Knobsets - The Spoke Knob - Passage

  • Can be ordered with any Brass rosette.
  • Sold as complete set. Includes Latch, Strike Plate, and Dust Box
  • 28 Degree Latch is available for additional charge
  • Fits any door between 1-3/8” to 2-1/4" thick with a 2-1/8" bore standard door prep*
  • Standard latch is for 2-3/8" backset. Specify 2-3/4" backset if required

* STRETTO rosette requires a 1-1/4” diameter bore hole and 2-hole door preparation for thumbturn privacy

 

 

Specifications:

  • Backset: Adjustable 2-3/8" or 2-3/4"
  • Cross Bore: 2-1/8"
  • Door Thickness: 1-3/8" to 1-3/4"
  • Latch Faceplate: Round or Square Corner
  • Material: Brass

Product Specs

Subcategory:
Knobsets
Collection:
STUDIO Brass
Product Type:
Knobsets
Product Group:
Mechanical Locks
Product Subgroup:
Bored Locksets
Commercial/Residential:
Residential
Handle Type:
Knob
Series:
Studio The Spoke
Theme:
Contemporary
Electronic:
No
Lock Type:
Tubular
Keyed:
No
Keyed Function:
Non-Keyed
Lock Function:
Passage
MAP Policy:
Yes
Product Function:
Passage
Product Style:
STUDIO Brass
Product Material:
Brass
Product Category:
Mechanical Locks
Product Substrate:
Brass
Department:
Door Hardware

Emtek 5109.SPK.US19 – Frequently Asked Questions

1) Will the Emtek Spoke passage knob fit a standard pre-bored door?
Yes, it goes into standard 2-1/8 inch cross bore prep. The latch backset is adjustable between 2-3/8 and 2-3/4 inches, and the standard latch ships set for 2-3/8 inch, so specify 2-3/4 inch if that is what your door is drilled for. It is a tubular bored lockset, not a mortise lock, so no pocket prep is involved.
2) Does the Spoke knob passage set lock, or is it just a latch?
It does not lock. Passage function means both knobs always turn and the latch simply holds the door shut, which is what you want on a hall, closet, or pantry door. There is no keyway and no thumbturn on it. For a bed or bath you need a privacy set, and for an exterior or office door you need a keyed entry set.
3) Is the Emtek Spoke knob suitable for a commercial building or an office door?
It is built as residential brass hardware, so for commercial corridors, offices, and other high-traffic openings a graded cylindrical lock is the better fit. Comparable passage knobs we carry include the Schlage D10S, a Grade 1 heavy duty non-keyed knob lock, and the Corbin Russwin CK4310, Grade 1 with a 1-3/8 to 2 inch door thickness range. For medium duty, the Falcon W101 is Grade 2 with a 2-3/4 inch backset and carries a fire rating.
4) What is the closest equivalent to the Emtek Spoke passage knob if I need a Grade 1 rated passage knob for a commercial opening?
The Emtek Spoke knob in passage function is a tubular, non-keyed residential knobset in brass. For a commercial opening that needs an ANSI grade behind it, the Schlage D10S is a Grade 1 heavy duty cylindrical passage knob lock with the Orbit knob, and the Corbin Russwin CK4310 is a Grade 1 passage/closet cylindrical lock with the Global knob that covers doors 1-3/8 inch to 2 inch thick. The Falcon X101 is another Grade 1 heavy duty cylindrical passage knobset, fire rated, covering 1-3/8 inch to 2-1/4 inch doors.
5) What do I use instead of the Emtek Spoke passage knob on an exterior or keyed entry door?
The Spoke passage knob is non-keyed, so it does not take a cylinder. Keyed entry knobs in the comparable set include the Kwikset 400P Polo entry knob with 6AL latch and RCS strike, the Kwikset 400P-CP Grade 3 keyed entry knob for 1-3/8 inch to 1-3/4 inch doors, the Master Lock BC Series Grade 3 Biscuit keyed entry knob, and the Deltana 6901 Portland entry knob for 1-3/8 inch to 1-3/4 inch doors. For a commercial entrance, the Corbin Russwin CK4851 is an entrance/office cylindrical knob lock with a conventional cylinder covering 1-3/8 inch to 2 inch doors.
6) Is a dummy knob the same as the Emtek Spoke passage knob?
No. The Spoke passage knob is a working latchset - the knob turns and retracts a latch. A dummy knob is surface mounted trim with no latch, used on inactive leaves and closet fronts. Dummy options include the Schlage A170 Grade 2 single dummy trim for 1-3/8 inch to 1-7/8 inch doors, the BEST 6K Series Grade 2 single dummy trim, the Omnia 434/0 egg-shaped single dummy in solid brass, and the Cal-Royal BA40 dummy knob in the Barrington BA Series for 1-3/8 inch to 1-3/4 inch doors.
7) What comes in the box with the Emtek Studio Spoke knob set?
It ships as a complete set: both knobs with your chosen rosettes, the latch, the strike plate, and a dust box for the strike side. The latch faceplate comes round corner or square corner so it can match the existing mortise in the door edge. Nothing else is required to hang it on a pre-bored door.
8) Can I get the Emtek Spoke knob with no visible screws on the rose?
Yes. The CF (concealed fastener) mechanism is an option, and with it the rosettes carry no exposed screws. The other two choices on that same option are the 28 degree rotation latch, which shortens how far the knob has to turn, and standard, which is the normal exposed-fastener mounting. Pick one when you order.
9) What rosette shapes can the Emtek Spoke knob be ordered with?
Seven brass rosettes pair with the Spoke knob: Disk, Modern Rectangular, Quincy, Square, Urban Modern, Watford, and Wilshire. The knob and the rose are separate choices, so you can run one rosette shape through a whole house and change the lever or knob design room to room.
10) Do I have to give my door thickness when ordering the Emtek Spoke knob?
There is a door thickness entry on the order, and it is worth filling in. Backset is the required choice (2-3/8 or 2-3/4 inch) since that is what has to match the hole already drilled in the door edge. Thickness matters because the spindle and mounting screws are sized to it, so state it rather than leaving it blank on anything thicker than a normal interior door.
11) What is a comparable solid brass passage knob to the Emtek Spoke in a traditional look?
The Spoke knob is brass with a contemporary theme and seven rosette shapes to choose from. For a traditional profile in the same material, the Omnia 434/PA is an egg-shaped knob latchset in solid brass with a 3 inch projection in passage function, and the Baldwin Estate 5011 Colonial passage knob with the 5058 rose is a passage/hall/closet knob. The Baldwin Estate 5000 Baltimore 2 inch knob with 5048 rose comes preconfigured as a passage lock with a 2-3/8 inch backset and full lip strike.
12) What is a simpler passage knob than the Emtek Spoke for a rental turnover where finish choice does not matter?
The Emtek Spoke passage knob is ordered by rosette and finish, with seven rosette shapes including Disk, Square and Wilshire and ten finishes. When the opening only needs a working passage latch, the Pamex FTF Baron is a Grade 3 passage knob lockset for 1-3/8 inch to 1-3/4 inch doors, the Dexter C2000 is a Grade 2 non-clutching passage ball knob over the same door range, and the Kwikset 200P Polo passage knob ships with a 6AL latch and RCS round corner strike.
13) Which passage knob should I standardize on across a building if I want a Grade 2 option rather than the Emtek Spoke?
The Spoke passage knob is a residential brass knobset ordered by rosette and finish. For a Grade 2 passage knob to run building wide, the Corbin Russwin CK4410 is a Grade 2 passage/closet cylindrical lock with the Global knob for 1-3/8 inch to 1-3/4 inch doors, the Arrow MK01 and RK01 are Grade 2 passage cylindrical knob locks over the same door range with the RK01 using a ball knob, and the Dexter C2000 is a Grade 2 passage ball knob for the same thicknesses.
14) Is there a keyless combination knob I can use where the Emtek Spoke passage knob would go?
The Spoke passage knob is non-keyed and latching only. If the opening needs code entry rather than free passage, the Lockey 3830 is a mechanical keyless combination knob lock with an auto-locking passage function, covering doors 1 3/16 inch to 2 inch thick.
15) Will an exit device knob trim work in place of an Emtek Spoke passage knob?
No. The Spoke is a complete tubular knobset with latch, strike plate and dust box for a bored door prep. Exit device trim mounts to a panic device, not to a bored latch: the Sargent 28C-KNOB is knob and rose trim for the 28 Series for 1-3/4 inch doors, the Sargent 78-2875 is an outside knob only in the 7800 Series, and the Imperial USA ED-BKL580 is knob trim in storeroom function for the ED-500 Series.
16) What is a Grade 2 passage knob available in satin brass like the Emtek Spoke?
The Spoke knob offers Satin Brass (US4) among its finishes. The Bravura Dallas with rectangle trim is a Grade 2 passage knobset in a US4 satin brass finish, and the Bravura Albany and Lynchburg are Grade 2 passage knobsets with round trim.
17) What finishes does the Emtek Studio Brass Spoke knob come in?
Ten finishes: Flat Black (US19), French Antique (US7), Matte White (MW), Pewter (US15A), Polished Chrome (US26), Polished Nickel Lifetime (US14), Satin Brass (US4), Satin Nickel (US15), Satin Rose Gold (SRG), and Unlacquered Brass (US3NL). Unlacquered brass will patina with handling rather than staying bright, so if a property needs every door to look identical for years, one of the lacquered or plated finishes is the steadier pick.
18) Can I order the Emtek Spoke knob with one finish inside and another outside?
Yes, split finish is an optional entry on the order. Useful when the corridor side of a door has to match building-standard hardware and the room side matches the unit's own finish scheme.
19) Can I order a matching keyed entry knob in the same look as the Emtek Spoke passage set, or do I need a combo pack?
The Spoke knob is offered in passage function, non-keyed, with the rosette and finish chosen at order. Where a single order needs to cover both an exterior and an interior door in one design, the Schlage Residential F500 Plymouth with Georgian knob is a combo pack with adjustable backsets and dual strikes for doors 1-3/8 inch to 1-3/4 inch thick.
How fast can I get the Emtek 5109.SPK.US19 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 5109.SPK.US19 come with a warranty?
Absolutely. The Emtek 5109.SPK.US19 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 5109.SPK.US19?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Emtek 5109.SPK.US19 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!