Emtek Warwick Cabinet T-Knob, Schaub Collection

A mounting screw is included with each knob, so nothing else is needed to hang it on a standard drilled cabinet door or drawer front. Worth checking your door or drawer front thickness against the screw you receive: thick slab fronts or a front with an applied panel can need a longer screw than the one packed with a knob.

A T-knob mounts on a single screw hole, so it swaps straight into an existing single-bore knob hole with no new drilling and no center-to-center to match. Its bar shape gives you something to hook a finger under, closer to how a pull feels, which is why people use them on drawers where a round knob feels small. Where you need a true two-hole pull, the boring is different and you would be filling and redrilling. If you want a round single-hole knob instead, the Deltana KRB175 is a 1-3/4 inch solid brass round knob, and the Schaub 131 is a 1-1/2 inch round Artifex knob.

The Warwick T-knob is a modern rectangular brass knob, so the shape is what changes when you switch. The Schaub 131 is a 1-1/2 inch round Artifex cabinet knob, and the Deltana KRB175 is a heavy-duty solid brass round knob with a groove at 1-3/4 inch diameter. Both are round-profile knobs where the Warwick reads as a rectangular bar, so on a run of doors you would pick one form and stay with it rather than mixing the two.

The Warwick T-knob is sold at 2 inches. For a smaller footprint, the Schaub 1200 Modo cabinet knob is 16 mm, and the Schaub 10030 Cafe modern oval slot knob and Schaub 10040 Cafe modern oval knob are each 1 inch with 7/8 inch center to center. Those give you a shorter knob body on narrow stiles and rails where a 2 inch knob overhangs.

The Warwick cabinet T-knob ships with a mounting screw, so it sets on a single bore. The Schaub 10030 and Schaub 10040 Cafe knobs are each listed at 7/8 inch center to center, which means two holes in the door or drawer front. If the existing doors are drilled for one hole, the Warwick and other single-bore knobs drop in; the center-to-center Cafe knobs would need the fronts redrilled.

Six finishes: Oil Rubbed Bronze (US10B), Satin Brass (US4), Polished Nickel (US14), Satin Nickel (US15), Flat Black (US19), and Polished Chrome (US26). That is the complete range. The US codes matter if you are matching to Emtek door hardware already installed, since Emtek uses the same finish codes across its lines.

Brass, both the material and the substrate. It is not a zinc or pot-metal knob with a brass-look plating, which is what usually fails first at a heavily used drawer front. Brass is also why the finish range runs to living finishes like Satin Brass and Oil Rubbed Bronze.

Residential is what the Warwick T-knob is classed for. For millwork in a leasing office, clubhouse, or anywhere on a commercial maintenance schedule, specify hardware carrying a commercial classification instead. It is fine for apartment unit kitchens and baths, which is where most multi-family cabinet hardware actually lives.

Flat Black (US19) is SPC86726US19. The other numbered finishes follow the same pattern with the finish code on the end: Satin Nickel is SPC86726US15 and Satin Brass is SPC86726US4. The SPC prefix reflects the Schaub collection origin of the Warwick design.

Match on two things and you are covered: the 2 inch size and the finish code stamped in the order, since the Warwick T-knob is a single-size product and only the finish varies across the six options. If the existing knobs are Emtek elsewhere in the unit, the US finish codes carry across Emtek lines, so a US15 knob will sit with US15 door hardware.

At 2 inches the Warwick is on the larger side for a knob, which suits wide drawer fronts more than small upper doors. For a smaller footprint, the Schaub 1200 Modo is a 16 mm knob, the Schaub 10030 and 10040 Cafe knobs are 1 inch, and the Schaub 131 Artifex is 1-1/2 inch round.

The Warwick T-knob is a contemporary, modern rectangular brass knob. For a more traditional face on the same kind of single-knob hardware, the Orca Hardware CK-18032 is a Mission round cabinet knob from the 18-Mission collection, and the Delaney solid brass cabinet knob is a solid brass knob in the same category. Both serve the same function as the Warwick, just with a different design vocabulary.

The Warwick cabinet T-knob is a residential brass knob. Where the cabinet run takes heavier daily use, the Deltana KRB175 is described as a heavy-duty solid brass round knob at 1-3/4 inch diameter. If you are standardizing a property with public or shared cabinetry, that heavy-duty designation is the difference worth weighing.

They are different parts despite both being knobs. The Warwick is a 2 inch modern rectangular brass T-knob with a mounting screw. The Schaub 10040 is a 1 inch Cafe modern oval knob with 7/8 inch center to center, and the Schaub 10030 is the same 1 inch Cafe knob in an oval slot form, also 7/8 inch center to center. Size, profile, and the hole pattern all differ, so the Cafe knobs are not a drop-in for a Warwick already on the door.

Modern rectangular in style and contemporary in theme, so it reads clean and squared rather than ornate. If you are working a traditional or mission kitchen, the Orca CK-18032 Mission round knob is the closer match, and the Schaub 10040 Cafe modern oval is a softer take if the rectangular bar is too hard-edged for the room.

Both, in effect. The Warwick T-knob is Emtek's Schaub Collection, and the part numbers carry the SPC prefix from Schaub. If you are cross-referencing a Schaub catalog against an Emtek order, that is the same knob, not two competing items. ZenSupply also stocks Schaub-branded cabinet knobs alongside it, such as the 10040 Cafe and the 131 Artifex.

The Warwick T-knob comes from the Schaub collection, so staying in Schaub keeps the finish and detailing family consistent. Within Schaub, the 131 is a 1-1/2 inch round Artifex knob, the 1200 is a 16 mm Modo knob, and the 10040 is a 1 inch Cafe modern oval knob. Any of those gives a different silhouette on an island or upper run while remaining Schaub hardware.

The Warwick cabinet T-knob is brass through the body. Among comparable cabinet knobs, the Delaney solid brass cabinet knob and the Deltana KRB175 round knob with groove are both solid brass, the Deltana at 1-3/4 inch diameter. That matters when a job specifies brass substrate across the cabinetry rather than plated alternatives.

Both Orca knobs do the same job as the Warwick T-knob, which is a single cabinet knob. The Orca CK-18032 is the Mission round cabinet knob from the 18-Mission collection; the Orca CK-19032 is the Whistler cabinet knob from the 19-Whistler collection. They are separate design series, so the choice between them is the face of the knob rather than the function.