Emtek Wrought Steel Towel Ring

The Emtek Wrought Steel towel ring measures approximately 6 inches in diameter with a 2-1/4 inch projection. The Deltana BBS2008 is a 6-1/2 inch towel ring in the BBS Series, and the Deltana 88TR6 is a 6 inch towel ring in the 88 Series built in solid brass. The Emtek is offered in Flat Black Steel and Satin Steel with a choice of #1, #2 or #3 rosette, so if the rosette-matched look is the point, the Emtek is the one to hold; if you only need a ring of similar diameter, either Deltana covers it.

No. The rosette choice of #1, #2 or #3 is specific to the Emtek Wrought Steel bath hardware line, so a Delaney Acadia 900 Series, Delaney Denali 1100 Series, Orca 2760 Cypress or Orca 9160 Waldron towel ring will carry its own base plate design rather than an Emtek rosette. Those are valid towel rings but they are not rosette-matched substitutes - if the bath is being built around the Emtek rosette, stay within the Emtek Wrought Steel ring.

You pick #1, #2, or #3 rosette. The rosette is the wall plate the ring arm mounts to, so it is the visible styling decision, chosen to match the rosettes on the other Wrought Steel bath pieces and door hardware in the room. All three come in the same 6-1/2 inch size.

Close alternatives in size include the Deltana BBS2008 at 6-1/2 inches and the Deltana 88TR6 at 6 inches, both solid brass. The Deltana BBN2008 runs 6-1/4 inches. If you want a rustic look rather than a polished brass one, the Emtek is the one built around that theme; Deltana's Classic 98C2008 is the traditional styling.

For volume work where the look just has to be clean and consistent, Sure-Loc's Basic towel ring is the plain wall-mount option, with Baden, Boulder, and Brighton as styled versions in the same line. Delaney also spans several series (Congaree 200, Cascade 300, Acadia 900, Denali 1100) if you are matching Delaney door hardware already in the building. The Emtek Wrought Steel ring suits single high-end baths and rustic interiors more than a 200-unit rollout.

The Emtek Wrought Steel towel ring runs approximately 6 inches in diameter. For a slightly larger ring, the Deltana BBN2008 is 6-1/4 inches in the BBN Series and the Deltana BBS2008 is 6-1/2 inches in the BBS Series. Both are stepped up from the Emtek diameter, which matters when you are matching an existing towel loop or a wider hand towel.

The Emtek Wrought Steel towel ring is a residential-rated piece in the Wrought Steel Bath Hardware series with a rustic styling direction, offered in Flat Black Steel and Satin Steel. For fleet standardization across many units, the Sure-Loc Basic towel ring (Basic series) and the Delaney Congaree 200 Series towel ring are single-look series pieces without the rosette selection step, which removes a per-unit decision from your order. Choose the Emtek where the rosette is being matched to the door hardware in the same unit.

The Emtek Wrought Steel towel ring is styled as wrought steel in a rustic direction. For a different design language in the same function, the Orca Hardware 3660 Swirl towel ring (36-Swirl Series) and the Orca Hardware 4860 Blakely towel ring (48-Blakely Series) are decorative profiles, while the Sure-Loc Boulder and Sure-Loc Brighton towel rings are separate design series. All four mount as wall towel rings the same way; the difference is the post and ring profile.

The Emtek Wrought Steel towel ring is catalogued with a steel substrate under the Wrought Steel collection, with the ring itself described as brass. The Deltana 88TR6 and the Deltana 98C2008 Classic 6 inch towel ring are both solid brass constructions. If your finish schedule calls for an all-brass body, the Deltana pieces state that outright; the Emtek is the choice where the wrought steel appearance is what you are matching.

A roughly 6 inch ring with 2-1/4 inch projection is sized for hand towels, which is what a towel ring is for. Full bath towels belong on a bar or hook; hanging one on a ring this size leaves it bunched and slow to dry. Plan on a matching Wrought Steel towel bar for the bath towels and use the ring at the vanity.

The Emtek Wrought Steel towel ring is configured across two finishes and three rosettes, which is useful when matching a room but is more decision than a straightforward replacement needs. The Sure-Loc Basic towel ring in the Basic series and the Delaney Cascade 300 Series towel ring are single-configuration wall towel rings that drop into the same spot with no rosette or finish family to coordinate.

Both are wall mounted towel rings. The Emtek Wrought Steel towel ring is a residential bath hardware piece measuring about 6 inches in diameter with a 2-1/4 inch projection, offered in Flat Black Steel and Satin Steel. The Sure-Loc Baden is a wall mounted towel ring in the Baden series, a separate design family with its own post and plate. Pick by which bath hardware program the rest of the room is being drawn from.