Eaton Dual Fuse Clip Kit for E...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$76.99
Eaton Dual Fuse Clip Kit for Enclosed Control, 30A 250V

Eaton Dual Fuse Clip Kit for Enclosed Control, 30A 250V

(No reviews yet) Write a Review

Model: C351KC21R

In Stock (leaves warehouse same day if ordered before 3pm ET)

$76.99
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Eaton Dual Fuse Clip Kit for Enclosed Control, 30A 250V

The Eaton Dual Fuse Clip Kit is an enclosed control accessory designed for field installation in non-fusible starters, converting them to accept R rejection type fuses. This kit includes dual fuse clips sized for 3 dual element fuses and is rated 30A, 250V, making it a reliable solution for upgrading non-fusible enclosures in commercial and industrial control panels. Backed by cUL Listing, it is part of Eaton's Freedom/Advantage series of enclosed control accessories.

Key Features

  • Type: Dual fuse clips kit for field installation in non-fusible starters.
  • Amperage Rating: 30A for use with dual element fuses.
  • Voltage Rating: 250V, suited for standard enclosed control applications.
  • Contact Rating: 30A rated contacts for dependable fuse engagement.
  • Fuse Compatibility: Designed for use with R Rejection Type Fuses; non-fusible without fuse clips installed.
  • Series: Part of the Eaton Freedom/Advantage enclosed control series.
  • Compact Footprint: Product Width 2 in, Length/Depth 2.4 in, Height 3.3 in for straightforward retrofits.

Certifications & Compliance

  • cUL Listed

Technical Specifications

  • Warranty: 1 year
  • Amperage Rating: 30A
  • Voltage Rating: 250V

Typical Applications

  • Enclosed Control and Starter Retrofits
  • Non-Fusible Starter Field Upgrades
  • Commercial and Industrial Electrical Panels
  • Motor Control Center Accessory Installations
  • Renovation and Maintenance of Existing Control Enclosures

Why Eaton?

Eaton's Dual Fuse Clip Kit delivers a cUL Listed, 30A/250V rated accessory built for dependable field conversion of non-fusible starters within the Freedom/Advantage series. Its compact, purpose-built design supports code-compliant, professional-grade upgrades to enclosed control equipment.

Manufacturer Resources

Product Specs

Product Width:
2 in
Warranty:
1 year
Used With:
For field installation in non-fusible starter
Amperage Rating:
30A
Voltage Rating:
250V
Series:
Freedom/Advantage
Certifications:
cUL Listed
Product Length/Depth:
2.4 in
Product Height:
3.3 in
Product Type:
Fuse Clip
Special Features:
For Field Installation in Non-Fusible Starter
Department:
Electrical
Listing:
cUL Listed
Product Group:
Circuit Protection
Product Subgroup:
Fuse Holders & Blocks
Product Length:
2.4 in
Product Weight:
0.2 lb

Eaton C351KC21R – Frequently Asked Questions

1) What does the Eaton C351KC21R fuse clip kit actually do to a non-fusible starter?
It converts a non-fusible Eaton Freedom/Advantage enclosed starter into a fused one. The kit is a set of dual fuse clips you field-install inside the existing enclosure so the starter will accept fuses. Without the clips installed, the enclosure stays non-fusible. Rated 30A, 250V.
2) Which fuses does the Eaton dual fuse clip kit take?
The clips are built for R rejection type fuses, and the kit is sized for three dual element fuses at 30A, 250V. Class R rejection clips physically block non-rejection fuses from seating, so you cannot drop in an older non-rejection cartridge fuse of the same size.
3) Can I use this 30A fuse clip kit on a 480V motor starter?
No. The clip kit is rated 250V, so it is limited to circuits at or below that. For a 480V enclosed starter you need clips rated 600V, not this kit.
4) Will the fuse clip kit fit inside my existing starter enclosure?
The assembly measures 2 x 2.4 x 3.3 inches (width, length/depth, height), which is sized to drop into Freedom/Advantage non-fusible enclosed control enclosures. Check the free space in your enclosure against those figures before you cut into an install.
5) I need fused disconnect protection in an existing starter. Should I buy this clip kit or replace the whole starter?
If the enclosed starter you already have is a Freedom/Advantage non-fusible unit and the circuit is 30A or less at 250V, the clip kit is the retrofit path: install the clips in the existing enclosure and add Class R fuses. Swap the starter instead if you are above 250V, above 30A, or the enclosure is not a Freedom/Advantage non-fusible type.
6) What is the exact part number for the Eaton 30A 250V dual fuse clip kit?
Eaton C351KC21R, in the Freedom/Advantage enclosed control accessory line. One model covers the whole kit, rated 30A, 250V.
How fast can I get the Eaton C351KC21R delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Eaton C351KC21R come with a warranty?
Absolutely. The Eaton C351KC21R is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Eaton C351KC21R?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Eaton C351KC21R from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!