You may also like
EXP INS VINYL RING TERM, 18-14, No8
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Subgroup:
- General Terminals
- Product Type:
- Vinyl Insulated Ring Terminal
- Standards:
- UL E9809
- Voltage Rating:
- 600 V
- Wire Size:
- 18-14 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Blue
- Product Material:
- Copper
Sta-Kon RB867-200 – Frequently Asked Questions
1) What wire gauge does the Sta-Kon RB867-200 ring terminal crimp onto?
The RB867-200 is a blue-insulated ring terminal sized for 18 to 14 AWG stranded copper wire. Blue is the standard color code for that gauge band, so if you are working 16 or 14 AWG branch leads it is the right barrel. For 22-16 AWG you want a red terminal instead, and for 12-10 AWG a yellow one.
2) What stud or screw size does this No. 8 ring terminal fit?
The ring is sized for a No. 8 stud or screw. It will drop over a #8 machine screw or terminal-block stud; it will not seat on a 1/4-20 stud, and on a smaller #6 screw the ring will sit loose under the washer.
3) Is the Sta-Kon RB867-200 rated for 600 volt control and branch circuit work?
Yes. The terminal carries a 600 V rating, which covers typical 120/208/240/277/480 V control panel and branch circuit terminations, and it is UL recognized under file E9809.
4) Are these ring terminals copper, or aluminum?
Copper barrel with vinyl insulation. That means they are for copper conductors only; aluminum wire needs a terminal rated AL/CU with the proper inhibitor compound. The vinyl sleeve gives you strain relief and insulation right up to the crimp.
5) Should I use a ring terminal or a fork/spade terminal on a panel terminal block?
Use the ring, like the RB867-200, anywhere the connection is subject to vibration or where code or spec calls for a captive termination: the ring cannot back off the stud if the screw loosens. A fork or spade slides in sideways without removing the screw, which is faster for service work on crowded strips but can shake free. For motor control, transformer studs, and grounding screws, ring is the usual choice.
6) Do I need a special crimp tool for these insulated Sta-Kon terminals?
Insulated vinyl terminals in the 18-14 AWG range crimp with a standard insulated-terminal crimper using the blue nest. Do not use a non-insulated die or pliers, which will cut the vinyl sleeve and cost you the strain relief that makes the termination hold.
7) Are Sta-Kon RB867-200 terminals made in the USA?
Yes, country of origin is the United States. That matters for Buy American and domestic-preference procurement on federal, municipal, and institutional jobs.
How fast can I get the Sta-Kon RB867-200 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon RB867-200 come with a warranty?
Absolutely. The Sta-Kon RB867-200 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon RB867-200?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon RB867-200 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.