Falcon 25-EAK 25 Series Exit A...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$759.69
$394.32
Falcon 25-EAK 25 Series Exit Alarm Kit components including crossbar, emergency exit decal, alarm circuit board, and wiring harness - battery powered, 110 dB alert, Satin Chrome (US26D), 3-foot width

Falcon 25-EAK 25 Series Exit Alarm Kit

(No reviews yet) Write a Review

Model: 25-EAK-3FT-US26D
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$759.69
$394.32
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Falcon 25-EAK 25 Series Exit Alarm Kit

The Falcon 25-EAK adds battery-powered exit monitoring to compatible 25 Series exit devices. When the touchbar is depressed, a 110 dB alarm sounds continuously until reset with a 1-1/4" mortise cylinder - keeping egress open while flagging unauthorized use. UL listed for code compliance.

Key Features

  • 110 dB Continuous Alarm: Sounds immediately when the touchbar is depressed; audible throughout most commercial spaces.
  • 9V Battery Power: Minimum six months of standby operation; single battery, minimal maintenance.
  • 24V Hardwire Option: Available for permanent installations requiring continuous power.
  • Authorized Reset: Requires a standard 1-1/4" mortise cylinder with standard A cam (5/16" wide × 3/4" long) - cylinder sold separately.
  • LED Status Indicators: Armed, disarmed, and low-battery states visible at the device.
  • External Inhibit: Compatible with card reader integration for access-controlled inhibit.
  • FSA/FSE Trim Compatible: Works with fail-safe and fail-secure trim configurations.
  • UL Listed: Meets code requirements for exit alarm applications.

Device Compatibility

Compatible with 25 Series rim, mortise, concealed vertical rod, and surface vertical rod exit devices. Works with US26D (Satin Chrome) finish.

⚠ Installation Requirement

A monitor switch (RX, LM, or DM option) must be present on the exit device to trigger the alarm. Verify your existing device's option code before ordering. The 1-1/4" mortise cylinder required for reset is not included.

Technical Specifications

  • Alarm Output: 110 dB continuous
  • Primary Power: 9V battery (≥6 months standby)
  • Alternate Power: 24V hardwire
  • Reset Method: 1-1/4" mortise cylinder, standard A cam (5/16" W × 3/4" L)
  • Required Device Option: Monitor switch - RX, LM, or DM
  • Series: 25 Series
  • Listing: UL Listed

Refer to Falcon 25 Series installation documentation for full integration instructions. See the Falcon Exit Devices Catalog (linked above) for series compatibility details.

Manufacturer Resources

Falcon Exit Devices Catalog

Product Specs

Subcategory:
Parts and Accessories
Product Subgroup:
Parts and Accessories
Product Group:
Exit Devices and Trim
Parts and Accessories Type:
Installation Accessories
Product Attribute:
Parts and Accessories
Product Type:
Exit Alarm Kit
Series:
25 Series
Product Category:
Exit Devices and Trim
Department:
Door Hardware

Falcon 25-EAK-3FT-US26D – Frequently Asked Questions

1) Will the Falcon 25-EAK exit alarm kit work on my existing 25 Series exit device?
Only if the device already has a monitor switch. The 25-EAK needs an RX, LM, or DM option on the exit device to trigger the alarm, so check the option code on what's hanging on the door before you order. It fits 25 Series rim, mortise, concealed vertical rod, and surface vertical rod devices, so the device type isn't the constraint, the switch is. If your device has no monitor switch, the kit won't sound.
2) Does adding an exit alarm to a fire exit door block egress or violate code?
No. The 25-EAK is an alarm, not a lock. Pushing the touchbar still opens the door, and the 110 dB alarm sounds continuously to flag the use until someone resets it with a key. The kit is UL Listed for exit alarm applications. It's the standard answer for a back-of-house or stairwell door that people keep propping or using as a shortcut.
3) Can I stop the Falcon 25-EAK from alarming when someone badges out with a card reader?
Yes. The 25-EAK has an external inhibit input that ties into card reader integration, so an authorized badge read suppresses the alarm and only unauthorized pushes sound it. It also works with FSA and FSE trim, meaning fail-safe and fail-secure electrified trim configurations on the same opening. That's the setup for a controlled door that still has to allow free egress.
4) Should I use a battery exit alarm kit or a hardwired one on a door with power available?
If you already have low voltage at the opening, hardwire it. The 25-EAK runs on a single 9V battery with a minimum six months of standby, which suits doors with no wiring and no panel, but it means someone has to change batteries and watch the low-battery LED. The 24V hardwire option removes that maintenance and is the choice for permanent installations. Either way, the LED shows armed, disarmed, and low-battery states at the device.
5) What finish does the Falcon 25-EAK alarm kit come in, and will it match my existing exit devices?
US26D satin chrome, which is the standard commercial finish on most 25 Series hardware, so it matches a typical satin chrome device without looking like a bolt-on. It's supplied for a 3 foot device width. If your openings are finished in something else, the kit only comes the one way.
6) Is the Falcon 25-EAK a complete exit device or just an alarm added to one?
It's an add-on kit, not a device. The 25-EAK supplies the alarmed crossbar, alarm circuit board, wiring harness, and an emergency exit decal that go onto a 25 Series exit device you already have or are buying separately. If the door has no exit device on it yet, you need the 25 Series device first, then this kit with an RX, LM, or DM monitor switch on it.
7) How loud is the Falcon 25-EAK and will staff hear it from across the building?
110 dB, sounding continuously from the moment the touchbar is depressed until it's keyed off. That carries through most commercial spaces, a warehouse floor, a corridor run, a back-of-house area. It does not time out on its own, so someone has to walk to the door with a key, which is the point: the door gets checked, not ignored.
How fast can I get the Falcon 25-EAK-3FT-US26D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Falcon 25-EAK-3FT-US26D come with a warranty?
Absolutely. The Falcon 25-EAK-3FT-US26D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Falcon 25-EAK-3FT-US26D?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Falcon 25-EAK-3FT-US26D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!