Falcon 512TP 25 Series - Thumbpiece Trim

Yes, handing has to be called out. The 512TP escutcheon is handed and you specify it with the order. The lever itself is reversible and ships RHR if you don't say otherwise, so if the opening is left hand reverse you need to state it up front rather than assume field reversal covers you.

No cylinder is included. The 512TP is catalogued as a non-keyed thumbpiece trim, so for any keyed function you order the cylinder separately to Falcon's stated cylinder requirements for the 25 Series. Plan the keyway and cam with the rest of your order.

Falcon builds the function into the 25 Series trim itself, which keeps the door prep simple and makes field retrofit onto existing 25 Series devices practical. It is a mechanical trim with no electrical component, so there is no wiring, power supply, or door loop to add. If you need the outside trim to be released electrically instead, look at electrified exit trim such as the Command Access ET25, which runs 12V or 24V with fail safe or fail secure options.

The Falcon 512TP is a non-keyed thumbpiece trim. For a thumbpiece with a cylinder, the Dexter ED1000T-CLRM-TP-NC is a Grade 1 classroom function trim combining a thumbpiece, pull plate and cylinder prep, shipped less cylinder. The Tell EDTHP53 is a keyed entry function thumbpiece trim for doors 1-3/8 inch to 1-3/4 inch thick. Both put key control on the outside of the opening, which the 512TP does not.

No. The Falcon 512TP is a non-keyed thumbpiece trim, so it cannot give you key-retracts-latch operation. For nightlatch, the Sargent 704ET is a Grade 1 heavy duty night latch lever trim with field reversible operation in the 700 Series, the Sargent 744 is a Grade 1 night latch trim with freewheeling levers for 8700 and 8900 Series surface vertical rod and mortise devices, and the Dorma YR03R is a wide stile nightlatch escutcheon lever trim supplied less cylinder. The Corbin Russwin VT957ET is a nightlatch escutcheon trim for ED5000 Series devices.

The 512TP trim is protected by a shear pin. Under abuse the pin breaks before the trim or the device internals do, and the pin is field replaceable, so a vandalized opening is a small parts fix rather than a full trim replacement. That is a real consideration on schools, stadiums, and high traffic entries.

A thumbpiece like the Falcon 512TP gives you a grip pull with a thumb depressor, which reads as an entrance-door look and stands up well on heavy pull traffic. Lever trim is what you want when the opening has to be operable without tight grasping or twisting, which is the common requirement on interior accessible routes. If a lever is the right call, Falcon's 25 Series is not your only route: the Dexter ED1500T Grade 1 lever trim and the Sargent 704ET night latch lever trim cover the same job in lever form.

Only if the opening has power and access control at the door. The Falcon 512TP is a mechanical, non-electronic thumbpiece trim. Electrified alternatives include the Command Access ET25 with 12V/24V operation and fail safe or fail secure options, the Command Access ET26 with Grade 1 construction and a field reversible design, and the Von Duprin E360L-BE-03, a Grade 1 electric passage trim with an 03 lever, fail safe, for 33/35A Series devices. These require wiring and a power supply that the 512TP does not.

No. A dummy trim is fixed and does nothing to the device; the Falcon 512TP is an operating thumbpiece trim protected by a replaceable shear pin. If you actually want a non-operating exterior, the Von Duprin 230DT is a dummy trim for 22 Series devices with a heavy duty 10 gauge steel escutcheon, the Detex 02BN is a dummy S-lever trim with a blank escutcheon for Value Series devices, and the Dexter ED1500T-DUMM-PULL is a Grade 1 dummy function trim with a handle pull plate. Ordering one of those when you needed latch operation leaves the door pull-only from outside.

Both are always-unlocked exterior trims, but they differ in operator and device family. The Falcon 512TP is a thumbpiece hand pull for Falcon 25 Series devices. The Corbin Russwin x810ET is passage function trim for ED4000 Series devices, the x910ET is passage function heavy-duty trim for ED5200S, ED5200, ED5400 and ED5800 Series, the 3310AET is passage function rim, surface vertical rod and mortise trim for ED300 Series, and the Arrow SRX01 is passage function trim with a Sierra lever and rose for ED910, S1150 and S1250 devices. Match the trim to the device series you already have on the door.

The Falcon 512TP is a non-keyed thumbpiece, so it will not deliver storeroom operation. Storeroom function trims include the Design Hardware KIL storeroom trim for 1000 and 2000 Series devices with a Schlage C keyway and flat lever, the Pamex E9000 Grade 1 storeroom trim with L3 lever for 1-3/8 inch to 2 inch doors, the Marks USA M195F storeroom lever and rose trim with spring loaded roses for M9900 touchbar devices, and the Tell EDELT80 storeroom escutcheon lever trim. Standardizing means matching one of these to every device series in the building.

Seven finishes: 605 bright brass, 612 satin bronze, 625 bright chrome, 626 satin chrome, 628 aluminum anodized, 630 satin stainless, and SP313 dark bronze anodized. 626 and 630 are the usual choices when you are matching existing commercial openings; 628 and SP313 pair with anodized aluminum storefront.

It is a commercial exit device trim, part of Falcon's 25 Series exit device line. That is the product class used on egress openings in schools, offices, healthcare, and multi-family common areas, not a residential entry set.