Blackburn FB2D24 FLEXIBLE BRAID 153.6KCMIL,24 INLONG

The FB2D24 is a flat, flexible tin-plated copper braid with two-hole terminations at each end, used to bond across joints that move or vibrate, expansion joints, transformer and switchgear connections, generator sets, and equipment grounding where a rigid conductor would fatigue. It is 24 inches long and the braid is rated 153.6 KCMIL.

Yes. The FB2D24 carries UL E3060 and CSA LR29625, so it can be specified on jobs where the inspector or the drawing calls for a listed bonding jumper. Those are the file numbers to cite on a submittal.

The cataloged cable length is 24 inches, which is the braid length on the FB2D24. When you lay out the bond, allow slack so the braid can flex rather than pulling taut between the two pads.

A flat braid flexes across thousands of movement cycles without work-hardening at the lug the way a stranded cable bent to the same radius will. The FB2D24 is built as a flexible, flat conductor for exactly that duty, so it suits expansion joints, rail and bus movement, and rotating or vibrating equipment. Where the connection is static and never moves, an ordinary stranded bonding jumper does the same electrical job with less cost and bulk.

It does. The FB2D24 conductor is tin-plated copper, which slows oxidation on the braid surface and is the standard choice for connections to aluminum bus or pads and for damp and outdoor locations. Use an appropriate joint compound and torque the bolts to the equipment maker's value.

The FB2D24 ships as a single braid assembly with two-hole terminals at the ends, sold each. Bolts, nuts, washers, Belleville washers and any joint compound are supplied separately, so add them to the order along with the braid.

Country of origin on the FB2D24 is the United States, which is what federal, transit and institutional buyers need for domestic-content documentation. Confirm the specific program's requirements with your submittal package.

Two holes per pad keep the braid from rotating on the bolt and hold the full contact face flat against the bus or ground pad, which is what many specs and utility standards require on bonding connections. The FB2D24 uses that two-hole pattern at both ends, so your landing pads need to be drilled to match.

Order Blackburn FB2D24. That is the manufacturer part number for the 153.6 KCMIL flexible braid, 24 inches long, with two-hole ends, sold one per package.