IDEAL Industries 34-015 Fuse P...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$72.50
$19.99
IDEAL Industries 34-015 Fuse Puller Small, 5" Long

IDEAL Industries 34-015 Fuse Puller Small, 5" Long

(No reviews yet) Write a Review

Model: 34-015
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$72.50
$19.99
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Fuse Puller Small, 5" Long

  • Features

    • Molded of tough, high-impact nylon for strength
    • For 0 to 30A/250V, 1/4" to 1/2" diameter fuses
    • No-slip gripping surface and protective finger stops for added safety

Manufacturer Resources

Product Specs

Product Group:
Electrical Boxes
Department:
Electrical
Product Subgroup:
New Ideal
Product Type:
Fuse Puller

Ideal Industries 34-015 – Frequently Asked Questions

1) What size fuses does the IDEAL 34-015 fuse puller grip?
The IDEAL 34-015 handles cartridge fuses from 1/4 inch to 1/2 inch in diameter, rated 0 to 30A at 250V. That covers the small ferrule-type cartridge fuses common in control panels, disconnects and older fuse blocks. Anything larger in diameter, or a higher amp class fuse, needs a bigger puller.
2) Is a nylon fuse puller safe to use on a live fuse block?
The 34-015 is molded from high-impact nylon, so the body is non-conductive, and it has protective finger stops to keep your hand off the fuse clips. It also has a no-slip gripping surface so the fuse doesn't drop out mid-pull. Standard electrical safety practice still applies, but the tool itself is built to keep your fingers out of the energized zone.
3) Will this fuse puller work on 600V or Class J and R knife-blade fuses?
No. The 34-015 is rated for 0 to 30A at 250V and sized for 1/4 to 1/2 inch diameter cartridge fuses. Knife-blade fuses and 600V class fuses are both physically larger and outside that rating, so you need a larger-capacity puller for those.
4) What should an MRO stockroom keep a small fuse puller like this for?
Small nylon pullers are the tool for pulling and seating 1/4 to 1/2 inch ferrule cartridge fuses in control panels, HVAC disconnects, fuse blocks and lighting contactor cabinets, up to 30A at 250V. One per electrical cart or panel shop toolbag is typical, since it's the only safe way to seat a snug fuse without prying with a screwdriver.
5) What is the exact part number for the IDEAL small fuse puller?
IDEAL Industries 34-015 is the manufacturer part number, and it is the only model in this configuration: the 5 inch small nylon fuse puller for 1/4 to 1/2 inch, 0 to 30A/250V fuses.
How fast can I get the Ideal Industries 34-015 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Ideal Industries 34-015 come with a warranty?
Absolutely. The Ideal Industries 34-015 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Ideal Industries 34-015?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Ideal Industries 34-015 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!