GENERAC 6864 Generac 6864 - XD5000E Diesel Portable, 50 ST

Yes. The XD5000E uses Generac's TruePower Technology, which holds total harmonic distortion under 5 percent. That's clean enough power for sensitive electronics, battery chargers, and tools with electronic controls, not just resistive loads like lights and heaters.

It runs a Yanmar LW Series 435cc air-cooled, direct injection industrial diesel engine. Diesel is the pick when the unit lives on a job site or in a fleet: less maintenance, better fuel efficiency, longer service life, and you're usually already carrying diesel for other equipment. A gas portable is lighter and cheaper to buy, but it won't share fuel with your diesel equipment and won't log the same hours.

Assembled weight is 260 lbs. That's a two-person lift into a truck bed at minimum, and realistically a ramp or a lift gate. On flat ground it rolls, but plan on loading help or a set of ramps when it moves between sites.

The frame is fully welded 1-1/4 inch steel, not bolted tube. That's the construction you want for a unit that gets dragged, strapped down in a trailer, and knocked around by other equipment. Fully welded means no hardware backing out over time from vibration.

Country of origin is the United States, and the 6864 carries no shipping or handling restrictions on our record. The USA origin matters for government, municipal, and institutional buyers working under domestic-preference purchasing rules.

Order Generac model 6864. That's the manufacturer part number for the XD5000E Diesel Portable in the 50 ST configuration. If you're matching a unit already in your fleet, check the nameplate for 6864 rather than just XD5000E, since Generac uses the XD5000E name across more than one configuration.

Air-cooled. The Yanmar LW Series engine cools off airflow, so it needs clear space around the housing and shouldn't be boxed into an enclosure, a corner of a garage, or backed tight against a wall. Keep the intake and exhaust sides open and it runs job site duty without trouble.